You are on page 1of 5

SESSION PLAN

Sector : Electronics Sector


Qualification Title : Computer Systems Servicing NC II
Unit of Competency : Install and Configure Computer Systems
Module Title : Installing and Configuring Computer Systems
Learning Outcomes:
LO1. Install Network Cables
LO2. Set Network Configurations
LO3. Set router/Wi-Fi/ Wireless Access Point / Repeater configuration
LO4. Inspect and test the configured computer networks

A. Introduction
This unit covers the outcomes required in installing and configuring desktop and workstation computers systems. It
consists of competencies to assemble computer hardware, install operating system and drivers for peripherals/devices, and
install application software as well as to conduct testing and documentation.

B. Learning Activities
LO 1: Assemble Computer Hardware
Learning Content Methods Presentation Practice Feedback Resources Time

  
  

LO 2: Prepare installer

Learning Content Methods Presentation Practice Feedback Resources Time

Operating system Self-paced  Read Information Sheet  Answer Self-Check  Answer key CBLM
o Windows 1.2 – 1 - Operating 1.2 – 1 1.2 - 1
o MAC OS X System 2 hrs
o Linux

Installers preparation Lecture-  Read Operation Sheet  Answer Self-Check  Answer key CBLM
demonstration 1.2 – 1 – Preparing 1.2 – 2 1.2 - 2
Self-paced - Operating System 5 hrs
Instruction Installer

Installation from Lecture-  Read Information Sheet  Answer Self – Check  Answer key CBLM
optical devices and demonstration 1.2 – 2 – Installing OS 1.2 – 3 1.2 – 3
portable devices from Optical Device and 4 hrs
Self-paced - Portable Device
Instruction
 Perform Job Sheet
 Performance
Demonstration 1.2 – Prepare a
Criteria 1 hr
Bootable flashdrive
Checklist 1.2
for OS Installation
-1
Automatic installation Lecture-  Read Operation Sheet  Answer Self – Check  Answer key CBLM
and custom demonstration 1.2 – 5 – Automatic and 1.2 – 6 1.2 – 6 2 hrs
installation Self-paced - Custom Installation (MS
Instruction OFFICE)
2 hrs

LO 3: Install operating system and drivers for peripherals/ devices

Learning Content Methods Presentation Practice Feedback Resources Time


OS installation Lecture- Read Operation Sheet  Answer Self – Check  Answer key CBLM
procedures demonstration 1.3 – 1 – Operating 1.3 – 1 1.3 - 1
Self-paced - System Installation 6 hrs
Instruction Procedures

Installation from Lecture-  Read Operation Sheet  Answer Self – Check  Answer key CBLM
optical devices and demonstration 1.2 – 2 – Installing OS 1.3 – 2 1.3 - 2
Self-paced - from Optical Device and 4 hrs
portable devices
Instruction Portable Device

Devices/drivers Lecture-  Read Operation Sheet  Answer Self – Check  Answer key CBLM
installation demonstration 1.3 – 4 – Procedures in 1.3 – 5 1.2 – 5 4 hrs
procedures Self-paced - Installing Peripheral
Instruction Devices

 Perform Job Sheet  Performance


1.3 – 1 – Installing Criteria
Operating System in Checklist 1.3
both Server and -1 2 hrs
Client Computer
LO 4: Install application software
Learning Content Methods Presentation Practice Feedback Resources Time
Types of Software Self-paced  Read Information  Answer Self-Check  Answer key CBLM
Sheet 1.4 -1 – Types of 1.4 - 1 1.4 - 1 2 hrs
Software

Installation of Various Demonstration  Read Operation Sheet  Answer Self – Check  Answer Key CBLM
Application Self-pace - 1.4 – 2 – Installation 1.4 – 2 1.4 – 2 5 hrs
Instruction
of Windows
Application

Utility Software Demonstration  Read Operation Sheet  Answer Self – Check  Answer Key CBLM
1.4 – 3 1.4 – 3 2 hrs
Self-pace - 1.4 – 3 – Utility
Instruction Software

 Perform Job Sheet  Performance


1.4 – 1 – Installation Criteria
of Windows Checklist 1.4
Application (MS -1
Office, Anti Virus, 1 hr
etc)
LO 5: Conduct Testing and Documentation

Test Device, Check Self-paced  Read Information  Answer Self – Check  Answer Key CBLM
circuit and System Demonstration Sheet 1.5 -1 – Power 1.5 – 1 1.5 – 1
Supply 2 hrs
 Steps how to test
power supply
 Read Operation Sheet  Perform Task Sheet  Performance
1.5 – 1 – How to use 1.5 – 1 – Voltage Criteria
Multi - Tester Checking of Checklist 1.5
Computer Power -1 1 hr
Supply

Stress Test Self-paced  Read Information  Answer Self – Check  Answer Key CBLM
Sheet 1.5 -2 – Stress 1.5 – 2 1.5 – 2
Test
 10 Stress test
tools to determine 2 hrs
the stability of
your computer
 Testing types

5S and 3Rs Self-paced  Read Information  Answer Self – Check  Answer Key CBLM
Role-playing Sheet 1.5 -3 – 5S and 1.5 – 3 1.5 – 3 2 hrs
3Rs 

Documentation Self-paced  Read Information  Answer Self – Check  Answer Key CBLM
Sheet 1.5 -4 – 1.5 – 4 1.5 – 4 2 hrs
Documentation

C. Assessment Plan
Practical Demonstration w/ Oral questioning, Demonstration w/ Oral questioning checklist and Interview

D. Trainer’s Self-Reflection of the Session

You might also like