maternity childbearing, dystocia surgical and curettage gynecologic surgery. • This table is raised and lowered by the hydraulic pressure, the front and back lean, backboard fold is the worm, gear, rack structure, Various actions can be adjusted in the right scope and easy to operate, The leg board can be disassembled, All the outside cover and ordure basin are stainless steel , it is specious and easy to clean. • Specifications: • Length 1330~1880mm • Height 680~930mm • Width 600mm • Adjust ≥240mm • Main Technial Parameters: Reversed Trendelenburg ≥10° • Back Section Raised From the Horizontal ≥45° • Trendelenburg ≥20° • Back Section lowered From the Horizontal ≥10° • This table is suitable for surgical procedures of the head,neck, thorax and abdomen,perineum and extremities as well as for gynecology, otorhino-laryngological and orthopaedics ,operation.The table's elevation,lowering ,reversed trendelienburg, trendelenburg, lateral tilt can be all automatically controlled. Leg section can be rotated, opeded, disassembled and adjusted easily. It is most suitable for the urological operation,The table top made of high strength glass, can move backwards and forwards. X- Ray examination can be carried out on it, It can be raised or lowered hydraulically by means of an oil pump. Various positions can be controlled from both sides. Chassis inside an outside covers are stainless steel. • Specifications : • Length 2100mm • Max Height 1040mm • Width 480mm • Min Height 800mm • Adjust ≥240mm • Main Function and date: • Reversed Trendelenburg ≥20° • Left ≥18° • Trendelenburg ≥20° • Head Section lowered from the Horizontal ≥90° • Head Section Raised from the Horizontal ≥45° • Backward and Forward Movement ≥400mm • Right ≥18° • Leg section Opened ≥90° • Back Section Raised From the Horizontal ≥55° • Leg section Lowered from the Horizontal ≥90° • Kidney Bridge Elevation ≥120mm • This bed is designed for obstetric diagonosis,operation and parturition. • Back section raised from the horizontal≥30° • Back section lowered from the horizontal≥15° • Length 1400mm • Width 500mm • Height 750mm • Volume:151×81×103cm • This table is designed for surgical procedures of the head, neck, thorax and abdomen, and extremities as well as tor gynaecological,oto- thinolaryngological and orthopaedics operations.It can be raised or lowered hydraulically by means of an oil pump. Varions positions can be controlled on the head. made of double decker plastic, X-ray examination can be avaliable during the operation. Leg section can be opened 90· and disassemble.It is most for the urological operation. • Specifications: • Length 2040mm • Height 800~1040mm • Width 480mm • Main Technial Parameters: • Trendelenburg ≥30° • Head Section Raised from the Horizontal ≥30° • Reversed Trendelenburg ≥50° • Head Section lowered from the Horizontal ≥90° • Latera Tilt ≥20° • Leg section Lowered from the Horizontal ≥90° • Back Section Raised From the Horizontal ≥80° • Kidney Bridge Elevation ≥120mm • Back Section lowered From the Horizontal ≥8° • This table is suitable for surgical procedures of the head,neck, thorax and abdomen,perineum and extremities as well as for gynecology, otorhino- laryngological and orthopaedics ,operation.The table's elevation,lowering ,reversed trendelienburg, trendelenburg, lateral tilt can be all automatically controlled. Leg section can be rotated, opeded, disassembled and adjusted easily. It is most suitable for the urological operation,The table top made of high strength glass, can move backwards and forwards. X-Ray examination can be carried out on it, It can be raised or lowered hydraulically by means of an oil pump. Various positions can be controlled from both sides. Chassis inside an outside covers are stainless steel. • Specifications : Length 2100mm Max Height 1040mm Width 480mm Min Height 800mm Adjust ≥240mm Main Function and date: Reversed Trendelenburg ≥20° Left ≥18° Trendelenburg ≥20° Head Section lowered from the Horizontal ≥90° Head Section Raised from the Horizontal ≥45° Backward and Forward Movement ≥400mm Right ≥18° Leg section Opened ≥90° Back Section Raised From the Horizontal ≥55° Leg section Lowered from the Horizontal ≥90° Kidney Bridge Elevation ≥120mm • BJ-ORX7 Universal Operation Table involves hydraulic and pneumatic technologies. It can be easily and conveniently operated, obtaining the desired position only by pressing the handle at the front. The bed surface is a specially made board and it has cassette path, which makes it convenient for fluoroscopy and other medical examinations. 3008E is fitted with many accessories for practical applications and meeting the requirements for various surgical operations. It is an ideal operating table for comprehensive use. • Specifications: Table size Length: 2000±50mm Width: 480±20mm Height: (700-950)±50 mm Elevation range: ≥240mm Table: Inclining forward≥20° Inclining backward≥15° Inclining leftward≥15° Inclining rightward≥15° Back board Folding upward≥75° Head board Folding upward≥35° Folding downward≥40° Leg board Folding downward≥90° Waist board elevation ≥80mm • Gynecology、urology、anorectal disease examine and operation tableThis table is multi-purpose examine and operation equipment powered by eletric ,it designed for tools and mirror of gynecology urology as well as childbearing.it can offer the suitable height and angle as well as the place of the body for the patient operation.JS611E garment is made of high strength palstic. 1.Table top dimension:length 1300mm×width 600mm 2.Table top Min height:620mm(except mattress thickness) 3.Table top Max height:870mm(except mattress thickness) 4.Back rest electric tilt angle range:upward 80 degree,downward 15 degree 5.Electric buttock board tilt angle range:downward 15 degree ,upward 20 degree • BJ-ORX9-integrated operating table is mainly used for thoracic surgery, ophthalmology, ENT, obstetrics and gynecology, urology and other general operations.The product adopts the foot-performed hydraulic pump which combines oil pump and box with transfer mechanism , while controlling the motion of the table by using imported ring, screw drive and cylinder. This kind of operating table can rotate in an angle of 360 ° and can be adjustable for the ∧ body type. The table board can conduct X- ray examination and photography. It possesses characters such as easy to use, reliable location, reasonable compact, innovative design and so on. • Specifications : • Inclining forward≥25° • Inclining backward≥10° • Inclining leftward≥25° • Inclining rightward≥25° • Back board Folding upward≥50° • Folding downward≥15° • Head board Folding upward≥15° • Folding downward≥90° • Leg board Folding downward≥90° • Folding outside≥90° • Angle on the waist plate: “∧”:200° • Angle under the waist plate: “∨”:100° • Table rated load capacity:180KG • The product is designed for head, neck, throax and abdomen, perineum as well as gynecology and obstetrics,orthopaedics and so on operations. The table's elevation, lowering, reversed trendelenburg; trendelenburg,lateral tilt are all automatically controlled by the Button,the back section elevation is controlled by high pressure gas jar. It can be adjusted easily.The airproof base is dustproof, waterpr-oof and stable,its model is easy for doctor to near the parient, and reduces the doctor's weary. The table is made of high-strength synthetic boards, it can penetrate the X-ray, it is advantageous for the perspective and the photography, it also can be used with C-arm. • Specifications : • Length 2100mm • Max Height 1050mm • Width 500mm • Min Height 750mm • Adjust ≥300mm • Main Function and date: Reversed Trendelenburg ≥25° • Back Section Raised From the Horizontal ≥60° • Trendelenburg ≥15° • Back Section Lowered From the Horizontal ≥30° • Lateral Tilt ≥15° • Leg section Lowered from the Horizontal ≥90° • Head Section Raised from the Horizontal ≥45° • Leg section Opened ≥90° • Head Section lowered from the Horizontal ≥90 • The product is designed for head, neck, throax and abdomen, perineum as well as gynecology and obstetrics,orthopaedics and so on operations. The table's elevation, lowering, reversed trendelenburg; trendelenburg,lateral tilt are all automatically controlled by the Button,the back section elevation is controlled by high pressure gas jar. It can be adjusted easily.The airproof base is dustproof, waterpr-oof and stable,its model is easy for doctor to near the parient, and reduces the doctor's weary. The table is made of high-strength synthetic boards, it can penetrate the X-ray, it is advantageous for the perspective and the photography, it also can be used with C-arm. • Specifications : • Length 2100mm • Max Height 1050mm • Width 500mm • Min Height 750mm • Adjust ≥300mm • Main Function and date: Reversed Trendelenburg ≥25° • Back Section Raised From the Horizontal ≥60° • Trendelenburg ≥15° • Back Section Lowered From the Horizontal ≥30° • Lateral Tilt ≥15° • Leg section Lowered from the Horizontal ≥90° • Head Section Raised from the Horizontal ≥45° • Leg section Opened ≥90° • Head Section lowered from the Horizontal ≥90 • It is a special designed new product for ophthalmology operation in need of hospital and clinical demands. • This operating table can be lowered to 500mm height from floor for the convenient of ophthalmologist. The table is equipped with hand rest for decreasing physical faltlgue of doctor. Its raising and lowing actions are controlled by electrically. It works with lower noise and can be adjusted easily. And also has a reliable performance. • Specifications: • Length 1950mm • Max Height 750mm • Width 520mm • Min Height 500mm • Main Technial Parameters: Adjustments of Head Section • Elevation≥50mm • Descend ≥50mm • This table is suitable for surgical procedures of the head,neck,thorax and abdomen, perineum and extremities as well as for gynaecological, otorhino laryngological and orthopaedics operations. It is characterized by versatility, easy operation, practical, good and cheap. • Electric Operating Table is designed for all kinds of operations in hospitals. Besides all functions of the Chinese-built operating tables. It has its own advantages: • 1. Leg section can be rotated, opened, disassembled and adjusted easily. It is most suitable for the urological operation. • 2. The table top, made of highstrength plastic plate, can move backwards and forwards, X-ray examination can be carried out on it. • 3. With 24V direct supply, the table is safe and reliable. The table's elevation, lowering, reversed trendelenburg; trendelenburg , lateral tilt are all automatically controlly by the Button. • 4.This table can be disposed different kinds of table tops for different use. Electric Operating Table is only such kind of product in China. It is one of the most advanced operating table with excellent functions. • Specifications : • Length 2100mm • Width 500mm • Max Height 940mm • Min Height 700mm • Back Section Raised From the Horizontal ≥45° • Leg section Opened ≥90° • Kidney Bridge Elevation ≥60mm • Backward and Forward Movenment >400mm • Head Section Raised from the Horizontal ≥45° • Supply AC 220V±10%, 50HZ • Functions:
surface • 2. The wood is made of Chinese toon wooden painted matte nut-brown. • 3. Angle of back section: 0 ~ 80°(±5°) • 4. Angle of leg section: 0 ~40°(±5°) • 5. size:2100×1200×400mm • 6.2pcs imported electro-motor, 1pc control box. • 7. Cold steel plate whole molding aperture clashing bed panel. Integrated stamping • frame and treated with electrostatic spraying, anti-aging and anti-rust • 8. Aluminum Alloy rails can go up and down. • 9. Weight capacity: 250 Kg • Features : • 1.Solid wood outside , powder spray painting mild steel surface • 2.The wood is made of Chinese toon wooden painted matte nut-brown. • 3.Angle of back section: 0 ~ 80°(±5°) • 4.Angle of leg section: 0 ~40°(±5°) • 5.Size :2100×1200×380mm • 6.2pcs of electro-motor, 1pc control box. 1pc of handset. • 7. Battery back up. • 8.The bed plate is made of steel tube. Powder coated. • 9.Weight capacity: 250 Kg • Functions: • 1. Laminated wood outside , powder spray painting mild steel bed plate surface • 2.The wood is made of Chinese toon wooden painted matte nut- brown. • 3. Angle of back section: 0 ~ 80°(±5°) • 4.Angle of leg section: 0 ~40°(±5°) • 5.Adjustable height: 450—680mm • 6.Size :2120×1200×450—680mm • 7.3pcs imported electro-motor, 1pc control box. • 8.Cold steel plate whole molding aperture clashing bed panel. Integrated • stamping frame and • treated with electrostatic spraying, anti-aging and anti-rust • 9.Aluminum Alloy rails can go up and down. • 10.Luxury castors, two with brake, two without brake • 11 .Weight capacity: 250 Kg • Functions: 1.Board bedstead. 2.Lattice surface, having good ventilation . 3.Installed side revolving banisters on both sides of bed. 4.Four universal castors, with angle brakes. 5.The lifting of back, leg and the whole body are controlled by three medical electro-motors, which have passed the certification of CE. 6.The main material of the body is carbon steel, with painted plasti • Functions: • 1.laminated wood bed head and foot board. Others made of mild steel powder coated. • 2.Angle of back section: 0 ~ 80°(±5°) • 3.Angle of leg section: 0 ~40°(±5°) • 4.Size :2180×980x540mm • 5.2pcs of electro-motor, 1pc control box. • 6.The bed plate is made of steel wire grid. • 7.The stainless steel rails. • 8.luxury castors, two with brake, two without brake • 9.Weight capacity: 250 Kg • Features : • 1.Solid wood outside , powder spray painting mild steel surface • 2.The wood is made of Chinese toon wooden paintedl matte nut-brown. • 3.Angle of back section: 0 ~ 80°(±5°) • 4.Angle of leg section: 0~40°(±5°) • 5.Size :2100×1500×380mm • 6.2pcs of electro-motor, 1pc control box. • 7.The bed plate is made of steel tube. Powder coated. • 8.Two pillow in the bed head board. • 9.Weight capacity: 250 Kg • This Electric Operating Table BJ-OR39 is developed independently by our company wity innovativ and advanced technologies. The table is a compehesive one with high-quality and multi-purposes,which takes the leading position in the domestic market. The table can be used in almost all kinds of operations by means of speical design. The bedtop can be moved vertically and rotated horizontally. The tableboard is made from high-intensity synthesis panel. X-Ray transmissive, easy adjustment and easy use of C-arm make the table can be more capable for any operation. The operating table is controlled by Control Circuit, which is easy operation, low noise,reliable performance. • Specifications : • Length 2040mm Max Height 930mm Width 500mm Min Height 580mm Adjust ≥350mm Main Function and date: • Reversed Trendelenburg ≥20° • Back Section Lowered From the Horizontal ≥55° Trendelenburg ≥15° • Leg section Lowered from the Horizontal ≥90° Lateral Tilt ≥15° • Leg section Opened ≥90° Head Section Raised from the Horizontal ≥45° • Backward and forward movement ≥250mm Head Section lowered from the Horizontal ≥90 • Horizonal ratation of tabletop 180° Back Section Raised From the Horizontal ≥80° • Supply AC 220V±10%,50HRZ • Intended for surgical operations on head, neck, pleuroperitoneal cavity, perineum, limbs, etc. in hospitals. Oil pump provides hydraulic elevation, operating table controlled on the two sides to achieve the required position. • BJ-ORX8 Universal Operation Table is mainly used by department of thoracic surgery, ophthalmology, E.N.T., Obstetrics & Gynecology and urology for common operations. This product adopts the foot-stepping hydraulic pressure pump which combines oil-saving pump tank with driving machine, threadlike pole drive and air vat so as to control variable movements on the table. It provides convenient operation, reliable orientation, compact and reasonable structure, novel sculpt, etc. • Specifications : Table size Length: 2000±50mm Width: 500±20mm Height(max): ≥950±50mm Elevation range: ≥200mm Height(min): ≥750±50mm Table: Inclining forward≥20° Inclining backward≥15° Inclining leftward≥15° Inclining rightward≥15° Back board Folding upward≥90° Head board Folding upward≥35° Folding downward≥90° Leg board Folding downward≥90° Table rated load capacity:135KG • Suit for all surgery operating or examing It take hydraulic pump by footboard It take cylinder to control each action, easy to operate and localize New configuration is more sound Bulit in wasit section is easy to use Mattress is manufactured with anti-ccid and alkali material BJ-OR36 is one multi function operating table for thoracal, ophthalmology, urinology operation ect, I t is a good all-round equipment for clinical use. • Specifications: Length 1990mm Max Height ≥940mm Width 480mm Min Height ≤700mm Adjust ≥240mm Main Function and date: Head Section Raised from the Horizontal 0°~35° (Detachable) Trendelenburg 0°~15° Head Section lowered from the Horizontal 0°~40° (Detachable) Left 0°~10° Back Section Raised From the Horizontal 0°~70° right 0°~10° Back Section Raised From the Horizontal 0°~10° Adjust of Waist section ≥80mm Leg section Lowered from the Horizontal 0°~75° (Detachable) Load weight 135Kg Reversed Trendelenburg 0°~15° Baseplate removed or locked • Model BJ-COR1 electric multi-purpose obstetric table,it suit for gynaecological examine,diagnosing,childbearing caesarean birth as well as other gynaecology operations,it is multi-purpose and conveniently. 1.Table top width 925mm(two arms shelf width 325mm) 2.Table top length 1900mm(accessorial table length 600mm) 3.Min height for table top 740mm(including the table cushion thickness 60mm,electric) 4.Max height for table top 940mm(including the table cushion thickness 60mm,electric) 5.Table top tilt forward and backward angle range max 15 degree (electric) 6.Back rest tilt Max angle range 75 degree(electric) HELLASMED