You are on page 1of 4

®

"Privacy Is Security"

PrivacyLink
COMMERCIAL • RESIDENTIAL • INDUSTRIAL
®

the NEW the old


standard standard

Reinforced Vinyl Fencing TM

Privacy Decorative Slats “PRE-WOVEN” into the wire


PrivacyLink®

PrivacyMaster TM Industrial Link®


Privacy is Security
SlatLink TM Vinyl Wood TM

PrivacyLink® Products PrivacyLink® Vinyl WoodTM Industrial Link® PrivacyMasterTM SlatLinkTM


6SHFL¿FDWLRQV Buyers Choice

Wind load and privacy factor - approximately 98% 98% 75% 90% 80%

3 1/2" x 5" Mesh Yes Yes Yes No No

2" x 2" Mesh No No No Yes Yes


Available in 9 or 11 gauge galvanized before weaving No No No Yes Yes
(GBW) Type ll class lV wire (1.20 oz.)

Available in 9 or 10 gauge galvanized before weaving Yes No Yes No No


(GBW) Type ll class lV wire (1.20 oz.)

Available in 9 gauge galvanized before weaving (GBW) Yes No Yes Yes Yes
Type ll class V wire (2.0 oz.)

$YDLODEOHLQJDXJH¿QLVKJDXJHFRUHIXVHG
bonded vinyl coated wire - 7 colors available (except Yes Yes Yes Yes Yes
VinylWood)

Available in 9 gauge aluminized wire Yes No Yes Yes Yes

Self-locking double wall slats (no staples) Yes Yes No Yes Yes

Chain link manufactured up to 12' high Yes Yes Yes Yes Yes

Available in 25' rolls, 5' increments thereafter Yes Yes Yes Yes Yes

Slats inserted into chain-link fabric Yes Yes Yes Yes Yes

Available in 9 different slat colors below Yes No Yes Yes Yes

Fifteen year pro-rata limited warranty Yes Yes Yes Yes Yes

SLAT COLORS WIRE / CHAIN LINK COLORS


Forest Green Redwood Gray Dark Brown Beige Forest Green Redwood Gray Dark Brown

White Black Royal Blue Sky Blue Beige White Black Galvanized

Mix any color of slat with any color of wire (except VinylWoodTM). Colors are approximations.
Additional colors are available upon request.
PrivacyLink ® A d v a n t a g e s
• Labor Savings • Environmental Control • Wind Screen
• More Private • Virtually Non-Climbable • Theft Resistant
• Maintenance Free • Less Installation Time • Decorative
‡&RVW(I¿FLHQW    ‡7KHRULJLQDO0DQXIDFWXUHU    ‡6RXQG%DUULHU
Architectural 7KHPDQXIDFWXUHU¶VZHEVLWHLVORFDWHGDW
http://www.eprivacylink.com and E-Mail may be sent to 2.3 ´[´0HVK3URGXFWV
Reference info@privacylink.com. All other components of the Reinforced vinyl fence fabric
Specification system such as framework, fittings and gates shall be
manufactured by various standard fence industry
A 3ULYDF\Master70 6ODWLinkTM
The fence fabric shall be:
Reinforced Vinyl Fence manufacturers. Height {choose one}
While it is the intent of this specification to assist the 2.2 ò´[´0HVK3URGXFWV ¶´¶¶¶¶¶¶¶KLJK
professional specifier in making an informed choice of Reinforced vinyl fence fabric Fabric Diameter & Finish {choose one}
components and installation techniques, this is still a A 3ULYDF\Link® & ,QGXVWULDO Link® ´PHVKE\JD ´ JDOYDQL]HG
general specification. Certain details such as framework The fence fabric shall be: before weaving per ASTM A392 & A817,
sizes, post spacing and concrete footer sizes must be Height {choose one} 1.2oz Type II Class 4.
tailored to the specifics of the job site. Wind loading ¶´¶¶¶¶¶¶¶KLJK OR
data, freeze-thaw rates and other site conditions must be Fabric Diameter & Finish {choose one} ´PHVKE\JD ´
considered.  ´[´PHVKE\JD ´ JDOYDQL]HG galvanized before weaving per ASTM
before weaving per ASTM A392 & A817, 1.2 A392 & A817 1.2oz Type II Class 4.
PART 1 GENERAL oz Type II Class 4. OR
1.1 Summary OR ´PHVKE\JDILQLVK JD&RUH 
This specification details the components and  ´[´PHVKE\JD ´  vinyl coated by the thermally fused and
requirements for complete fence systems incorporating: galvanized before weaving per ASTM A392 & bonded method per ASTM F668, Class
3ULYDFyLink® A817, 1.2 oz Type II Class 4. 2B.
9LQ\OWoodTM OR OR
,QGXVWULDO Link®  ´[´PHVKE\JDILQLVK JD&RUH  ´PHVKE\JD ´ DOXPLQL]HG
3ULYDF\MasteUTM vinyl coated by the thermally fused and bonded before weaving per ASTM A491, Type I.
6ODWLinkTM method per ASTM F668, Class 2b. OR
1.2 Work Included OR  ´PHVKE\JD ´ JDOYDQL]HG
The contractor shall provide labor, materials and all  ´[´PHVKE\JD ´ DOXPLQL]HG before weaving per ASTM A392 & A817,
necessary accessory items for the installation of the before weaving per ASTM 2.0 oz Type II Class 5.
privacy fencing system specified herein. A491, Type I. Fabric Color {choose one when using c. above}:
1.3 Related Work OR The vinyl coated chain link fabric shall be black,
General Conditions - Earthwork - Concrete  ´[´PHVKE\JD ´ JDOYDQL]HG brown, beige, dark green, white, gray or redwood.
1.4 System Description before weaving per ASTM A392 & A817, 2.0 The privacy slats for 3ULYDF\MasterTM which are pre-
The privacy fencing system shall be a complete system oz Type II Class 5. inserted at the time of manufacturing shall be double
made up of chain link fence fabric (Re-enforced Vinyl Fabric Color {choose one when using #3 above}: ZDOOVHOIORFNLQJDSSUR[´ZLGHWRSURYLGHD
Fence Fabric) with pre-inserted polyethylene slats, The vinyl coated chain link fabric shall be black, tight fit in the fence fabric and provide a 90%
framework, fittings, gates and incidental accessory items. brown, beige, dark green, white, gray or redwood. approx privacy.
1.5 Quality Assurance The privacy slats for 3ULYDFyLink®, which are pre- The privacy slats for 6ODWLinkTM which are pre-
Installer Qualifications: Company specializing in inserted at the time of manufacturing, shall be inserted at the time of manufacturing shall be double
performing the work of this section with minimum five GRXEOHZDOOVHOIORFNLQJDQGDSSUR[´ZLGHWR ZDOOVHOIORFNLQJDSSUR[´ZLGHWRSURYLGHD
(5) years documented experience. provide a tight fit in the fence fabric and provide a tight fit in the fence fabric and provide an 80%
1.6 References 98% approx privacy. The privacy slats for approx privacy.
ASTM D638 Standard Test Method for Tensile ,QGXVWULDO Link® that are pre-inserted at the time of The slats shall be manufactured from virgin, high
Properties of Plastics manufacturing shall be double wall and approx density polyethylene and shall be {choose one}
ASTM D746 Standard Test Method for ´ZLGHWRSURYLGHDSULYDF\IHQFHIDEULFZLWKD white, redwood, dark brown, forest green, beige,
Brittleness 75% approx privacy. The slats shall be held in gray, black, royal blue and sky blue (color chart
ASTM D747 Standard Test Method for position in the chain link fabric by either a staple or available from the manufacturer on request).
Apparent Bending Modulus of a stitch. 2.4 Framework, Fittings & Gates
Plastics by Means of a Cantilever Both types of slats shall be manufactured from Framework, per ASTM F1043 - Standard Specification
Beam virgin, high density polyethylene and shall be for Strength and Protective Coatings on Metal Industrial
ASTM D1238 Standard Test Method for Flow {choose one} white, redwood, dark brown, forest Chain Link Fence Framework {special consideration to
Rates of Thermoplastics by green, beige, gray, black, royal blue or sky blue wind loading should be considered}. Fence Fittings, per
Extrusion Plastometer (color chart available from the manufacturer on ASTM F626 - Standard Specification for Fence Fittings.
ASTM D1505 Standard Test Method for Density request). Swing & Slide Gates, per ASTM F900 & F01184 -
of Plastics by the Density- B. 9LQ\OWoodTM Standard Specification for Industrial and Commercial
Gradient Technique The fence fabric shall be: Swing Gates & Slide Gates.
(All ASTM Standards referenced in this specification) Height {choose one}
1.7 Submittals ¶´¶¶¶¶¶¶¶KLJK PART 3 EXECUTION
6KRSGUDZLQJVPDQXIDFWXUHU¶VSURGXFWGDWDDQGVDPSOHV Fabric Diameter & Finish 3.1 Preparation
plan layout including spacing of components, accessories  ´[´PHVKE\JDILQLVK JD&RUH  Prepare the grade and remove surface irregularities,
and post details shall be submitted for approval. vinyl coated by the thermally fused and bonded if any, which may interfere with the installation of
method per ASTM F-668, Class 2b. the fence.
PART 2 PRODUCTS Fabric Color: The vinyl coated chain link fabric 3.2 Installation
2.1 Manufacturer FRORUVKDOOEH³&HGDU7RQH´7KHSULYDF\VODWV 3HU$670)±6WDQGDUG3UDFWLFHIRU
The Reinforced Vinyl Fence fabric with pre-inserted slats which are pre-inserted at the time of manufacturing, Installation of Chain Link Fence
shall be manufactured by 3ULYDF\Link®, LLC P.O. Box shall be double wall, fluted to give a wood like 3.3 Clean Up
295, Hyde Park, Utah 84318. The manufacturer may be DSSHDUDQFHVHOIORFNLQJDQGDSSUR[´ZLGHWR Contractor shall clean the job site of excess
contacted at 800-574-1076, 435-563-1058 or via fax at provide a tight fit in the fence fabric and provide a materials and debris. Material from posthole
435-563-1062. 98% approx privacy. The slats shall be excavations shall be scattered uniformly away from
manufactured from virgin, high-density the posts.
SRO\HWK\OHQHDQGWKHFRORUVKDOOEH³&HGDU7RQH´

Before Weaving After Weaving


1.2 oz is class 1 1.2 oz is type II class 4
2.0 oz is class 2 2.0 oz is type II class 5

3ULYDFyLink®
Continental Divide Fence
32%R[+\GH3DUN8WDK
(303) 455-1101
7HO    )D[  
5610 North Pecos Street
Web: www.eprivacylink.com
Denver, COEmail:
80221 info@eprivacylink.com
&RS\ULJKW3ULYDF\/LQN$OO5LJKWV5HVHUYHG

You might also like