Professional Documents
Culture Documents
Paging Messages
1 Paging Type 1
1. 2 TMSI Combination
2. 1 TMSI & 1 IMSI Combination
3. 2 IMSI Combination
2 Paging Type 2 * Links are provided for every
messages. To view the
1. 2 TMSI & 1 IMSI Combination detailed L3 Messages click
2. 3 TMSI Combination the messages.
3 Paging Type 3
2. System Info Messages Note: This is just a tutorial material for Layer 3
1 IDLE MODE Informations messaging and call flow. These contains
1. System Info 1 messages which we encounter in normal RF
scenarios, All the messages specified in GSM TS
2. System Info 2
4.08 is not covered. All the messages are taken
3. System Info 3 from TEMS 4.1.1 version.
4. System Info 4
5. System Info 13
2 DEDICATED MODE Information
1. System Info 5
2. System Info 6
Channel Request
Immediate Assignment
CM Sevice Request
Complete Layer 3 Info
Authentication Request
Authentication Response
Cipher Mode CMD
Ciphering Mode Command
Identity Request
Identity Response
Call Proceeding
Assignment Request
Assignment Command
Assignment Complete
Assignment Complete
Alerting
Answer Signal/Answer Message (ANM)
Connect
Connect Acknowledge
MOBILE TERMINATED CALL
MSC/
MS BSS HLR PSTN Click to return to main page
VLR
Roaming Number
Routing Information
Channel Request
Immediate Assignment
Paging Response
Complete Layer 3 Info
Identity Response
Setup
Call Confirmed
Assignment Request
Assignment Command
Assignment Complete
Assignment Complete
Alerting
Address Complete Message (ACM)
Connect
Channel Request
Immediate Assignment
Authentication Para
Authentication Request
Authentication Response
Update Location
Note:
This message normally for the Cell channel Informations. This will give the no of
frequencies allocated for the particular cell. In hopping case this will indicate the
frequencies in the MAL list along with the BCCH frequency. In non hopping case will
indicate the TCH & BCCH frequencies.
Note:
This message gives the information about the neighbor frequencies in the idle mode.
Will only gives the BCCH of the neighbors defined. And the NCC permitted parameter
allows the mobile to restrict the neighbors to be sent in the measurement report.
System Info 3 ( Idle Mode) Click to return to main page
System Info 4 ( Idle Mode) Click to return to main page
Note:
This message gives the information about the CBCH for the mobile to decode the
CBCH. Along with the other cell level details like LAC, RACH control parameters
etc…..
System Info 5 ( Dedicated Mode) Click to return to main page
Note:
This message gives the information about the neighbor frequencies in the dedicated
mode. Will only gives the BCCH of the neighbors defined.
8. Setup go back
Point 2:
In this message only the mobile forward the called number to the sy
9. Identity Request go back
9. Setup go back
Measurement Report 1
Measurement Report 2
Measurement Report 3
Measurement Report 4
Measurement Report 5
Measurement Report 6
Measurement Report 7
Measurement Report 8
Measurement Report 9
Measurement Report 10
Measurement Report 11
Measurement Report 12
Measurement Report 13
Measurement Report 14
Measurement Report 15
Handover Command
Handover Access
Physical Information
Handover Complete
Physical Information
Channel Request
Immediate Assignment
Location Updating Request
Authentication Request
Authentication Response
Note:
This is scheduled to allocate SDCCH for 2 mobiles
simultaneously.
DL Disconnect due to NO circuits Click to return to main page
Note
In dedicated mode or group transmit mode, higher layers can
request the setting of the channel mode.The channel mode
modify procedure allows the network to request the mobile
station to set the channel
mode for one channel. The channel mode covers the coding,
decoding and transcoding mode used on the
indicated channel.