You are on page 1of 4

1.

PARESHKUMAR BHATT
QA/QC INSPECTOR
Email: harikrishna _ bhatt@yahoo.co.in
Contact no. : +971 501609887
Total Experience: 16+ Years

Objective: Having more than 16+ years of wide experience as a QA/QC Inspector in various industries in
QA/QC department including precision component, machine manufacturing & heavy
fabrication field. During this tenure I have reported to manager, director, Sr.Inspector etc.

Education: a) Trade Certificate course in D’man Mechanical (1984)-NCVT Board, New Delhi (INDIA)
b) ASNT Level-II Non destructive examination course (PT, MPT, UT, RT)-2009

Skills : Drawing reading, material inspection at any stage, use of precision measuring instruments/test equipment,
calibration of equipment/instruments, release taken from client/TPI, maintaining quality system environment,
dimensional, visual & NDT inspection of machined, fabricated items, maintaining quality system environment. And also
I can carried out inspection of painted items, welder qualifying with process v/s position with documentation & records
maintaining as per standards/ITP/quality system etc….

Professional Experience:
I have total 16-years experience in QA/QC department including including precision component, machine
manufacturing & heavy fabrication field, thus in short as follow.
(A) Today, I am working in Petron Emirates & Contg. Co. LLC. Dubai (UAE) as a QC Inspector since March’07 to till
day.
Product : Fabrication work for any project including equipment & structure..
Responsibility : Following activities are carried out by me at various stages
a) Incoming material inspection with size, shape, condition and specification including consumable with reviewing mill
test certificates.
b) Monitoring & Inspection of assembly at fit up stage as per part list / bill of material with refrence to the drawing /
requirement.
c) Inspection of Fabricated Item like weld visual Inspection and Dimensional.
d) DPT & MPT test carried out as per standard & monitoring subcontractor NDT activities
f) Interpretation of RT Film as per acceptance criteria
g) Painting inspection as per specification and getting release from client/third party inspector as
per ITP.
i) Co-ordinate to third party inspection agency/client for the inspection.
j) Documents preparation as per ITP/procedure/manual/QAP/project requirement/clients
requirement like dimensional reports, NDT reports, release reports etc.and submitting to client
in the form of MDR
k) Final inspection carried out as per client requirement.
l) Liaise with QA/QC engineer and client representative for day to day quality related
activities of the project/contract.
m) Also I am familiar with some international standard like ASME V, ASME VIII, div 1&2,
ASME IX,ISO 8517 Class C,BSEN 8503 etc.
(B) Before that I was worked in Kaps Engineers (India) as a QC Engineer since July 2003 to March 2007.
Product : Size reduction machineries with plant like Pin pulverizer, Hammer Crusher, Plastic Grinding Machine, Micro
Pulveriser Machines etc.
Responsibility : I am responsible for whole quality product from incoming material to its dispatch stage.
(C) From Sept. 1998 to Jun.2003 I was worked in Excel Bearing Pvt. Ltd.(India) as a Q.C. Supervisor.
Product : Ball Bearing, Cylindrical Roller Bearing, Spherical Bearing, Special Type Bearing Company has working
accordingly QS 9000.
Responsibility : I am mainly responsible for whole quality product from incoming material to its dispatch with final
product audit report. Maintaining team working environment accordingly to QS 9000 and conducting study as per tools
like MSA,PPAP,SPC,FMEA, FREQUENTLY CALIBRATION STUDY WITH MAINTAINING HISTORY CARD,
MACHINE’S CMK/CPK PARAMETER STUDY, subcontractor development activities are also carried out.
(D) From Aug.1994 to Aug. 1998 I was worked in Nima Engineering Pvt. Ltd. (India) as a
Q.C. Inspector.
Product : Submersible pumps , 36”, 48”& 60” Centrifuges etc.
Responsibility : Inspection & Testing of incoming material, in process material & final product inspection with record
maintaining.

Personal Detail:
Date of Birth : 22nd January 1965
Marital Status : Married (2 children)
Nationality : Indian
Pass port no : E 5057807
Religion : Hindu
Languages known : English, Hindi, Gujarati

Joining period : Within two months

2. Sundarajan Kamalakarthick Says:


April 2, 2011 at 10:40 am
Covering letter / Comments.

I would like to be as Design Engineer Mechanical in Plant/Oil field industry,


As well any suitable Design line.

As had completed B. E mechanical engineering in Anna University, Chennai,


Tamil nadu, INDIA, with 67% marks. Transmission Design is my main subject in University, and got first prize with
medal.

After 4year degree of mechanical engineering, had completed Plant Design


Management system/Basic pipeline theory as well Design courses in Dubai
Image Graphics Software Solution Center. My special subject is autocad 2009.
While doing University, had gone Pre training to B.H.E.L, INDIA.
(Bharat Heavy Electrical Limited) and I gained knowledge of Boiler/Turbine
layout and piping Design. This company is one of the leading manufacturers of
Boiler/Turbine Vessels.

Apart from these I had served one year 4months as design engineer mechanical,
and got experience in structural design of plant/pipeline.

I herewith declare regarding above information what noticed is known to my


best knowledge.

Warm regards, – - – Be Well – - -


S. Kamalakarthik,
skamalkarthick@gmail.com.
Dated: 30.03.11.

3. NOUSHATH.M Says:
April 2, 2011 at 10:53 am
CURRICULAM VITAE

NOUSHATH.M
POST BOX NO.4752
WESCO, MAFRAQ
ABU DHABI, UAE.
Tele.No. 00971503106103
E-Mail: nnoushath@gmail.com
noushath97@yahoo.com

CAREER OBJECTIVE
To seek a suitable and challenging position of Machinist Cum Mechanical Technician to continue to the success of an
esteemed organization of fully skills and knowledge based on my formal education and experience that offers
challenging and increasing levels of responsibilities.

PERSONAL STRENGTHS
¬ Excellent and effective interpersonal skills
An enterprising leader with excellent analytical, planning &organizational skills.
¬ Excellent command in English
¬ Coherent leadership abilities, with a proven track record
¬ Self motivated and having strong sense of responsibility and ready to relocate.
EDUCATIONAL QUALIFICATIONS S
¬ S.S.L.C
¬ HSC (General Machinist)
 TURNER
JOB PROFILE
Strong skill in Machining jobs on Lathe M/c, Milling M/c, Shaping M/c, Radial Drilling M/c Tapping, Surface M/c.
Good Knowledge and Experience in Machining all kind of critical jobs like oil field equipments,”U” type BOP, Annual
Bop fitting items, Manifold items, different type of Valve components, all kind of Pump Items (Rotor, Impeller, Shaft,
Bushes etc.)Different types of API new manufacturing items (Flanges like Weld neck, Blind, Target, Spool, and Union
items. Casing Head, drilling Spools,Risers,Weco male and female connections and fabrication items(Flange, Pin
Brackets,Nozzle,Pipe etc. and all type of Fasteners’ (external and Internal Threading). Experience in Sewerage plant.
Maintenance, Overhauling of rotary and rotating equipments such as centrifugal pumps and compressors, gear boxes,
blowers, valves etc..Experience in Reciprocating pumps and compressors. Unique background of trouble shooting of the
equipments. Overhaul and repair of the plant equipments in respective areas including regular monitoring, disassembly,
repair and reassemble of equipments as well as implementation of modification and able to work with close tolerance
.Alignment procedures like rim &face, reverse and optical method.

Strong skill in read and write of Engineering Drawing and also knowledge of Hand drilling of all the Measuring
Instruments [ Micro meter , Vernier caliper , Screw gauge , Depth micro meter , Height Gauge , Plug Gauge .
Machined all kinds of API jobs reputed companies such as Cameron, Fmc, Weir oil and gas, Smith internatioinal, wood
group, Halliburton, Shaffer, Demco Anson Willis, Saipem, Weatherford, and National Drilling Company.
EXPERIENCE IN GULF

 Since February 2009 working as a Machinist Cum Mechanical Technician in WESCO (Weir Engineering Service
Company [ISO 9001,14001 & OHSAS 18001])
Abu Dhabi, UAE.
 June2006 to December 2008 Worked as a Machinist in SIGMA Engineering Works (Oil Field),Abu Dhabi,UAE
 January 1993 to December 2004 Worked as a Machinist in M/C El Maimani Red Brick Factory, Kingdom of Saudi
Arabia.

EXPERIENCE IN INDIA

¬ June 1989 to May1991 Worked as a Turner in Oriental Fabrication And Engineering Industries,Hosur,Tamil
Nadu,India
 May 1988 to May 1989 Worked as a App. Trainee in M/C Sundaram Clayton Ltd. Railway Product Division (T.V.S
Group) Housr,Tamil Nadu,India

ACADAMI C QUALIFICATIONS

Examination/Course
University/College
Year of Passing

Secondary School Certificate


Board of Public Exams, Tamil Nadu 1982

Higher Secondary Certificate


Board of Higher Secondary
Exams, Tamil Nadu 1984

Turner
Industrial Technical Institute ,Govt. of India, Tamil Nadu
1987

OTHER INFORMATIONS

Date of Birth : 15-04-1966


Place of Birth : Tamil Nadu
Religion : Muslim
Nationality : Indian
Marital Status : Married
Languages Known : English, Hindi, Malayalam & Tamil
Hobbies : Social Works, Swimming & Reading
Passport No : J 5522836
Place of Issue : Abu Dhabi
Date of Expiry : 13/2/2021

DECLARATION
I am here by certify that all the above mentioned information is true, correct and complete to the best of my knowledge
and belief, I will submit all the original documents in proof on demand.

Place: Abu Dhabi


Date: (NOUSHATH.M)

4. Akbar Says:
April 2, 2011 at 10:55 am
sir,
i am akbar petroleum engineer fresher in india .i would improve my knowledge so i join your companies likes as trainee
if any opening for fresher refer mail id

akbarbtech@gmail.com
mob; 9790955078

Leave a Reply to this Job


Top of Form

Name (required)

E-Mail (will not be published) (required)

Website

You might also like