Professional Documents
Culture Documents
EDUCATION
-University of Houston - Clear Lake
Houston, TX US
Some College Coursework Completed - 5/2011
Major: Engineering Management
GPA: 4.0 out of 4.0
Relevant Coursework and Accomplishments:
-Project Management
-Six Sigma
-Systems Engineering Management Planning
-Management of Technology
-University Of Oklahoma
Norman, OK US
Master's Degree - 12/2008
Major: Mechanical Engineering
GPA: 4.0 out of 4.0
Honors: summa cum laude
Relevant Coursework and Accomplishments:
Thesis: Fluid Structure Interaction Simulation of Blood Flow in the Left Heart.
Prosthetic heart valve design can be improved with a more complete understanding
the mechanism of heart valve opening and closing. To that end, a fluid-structur
e interaction simulation of the heart was conducted. The study showed that ventr
icle wall motion can cause heart valves to open and close even in the absence of
a favorable pressure gradient. This finding contradicts the widely held notion
that pressure gradients are the primary mechanism of heart valve motion.
-University of Oklahoma
Norman, OK US
Bachelor's Degree - 12/2007
Major: Mechanical Engineering
Minor: Math, Spanish
GPA: 4.0 out of 4.0
Honors: summa cum laude
Relevant Coursework and Accomplishments:
MEMS: Torsional Ratcheting Actuator Design. The SUMMiT V micromachining fabricat
ion process was used to develop design changes to increase the reliability and f
unctionality of a torsional ratcheting actuator.
Electrohydrodynamic Drag Reduction: Wind tunnel experiments were designed and co
nducted to determine the effectiveness of electrohydrodynamic drag reduction on
a circular cylinder. Results were summarized in a paper entitled "Electrohydrody
namic Drag Reduction on a Circular Cylinder" and presented at the ASME 2007 Grad
uate Student Research and Innovations Conference.
JOB RELATED TRAINING
-Qualified CAD Checker (April 2009)
-Geometric Dimensioning and Tollerancing Fundamentals (November 2008)
-Geometric Dimensioning and Tollerancing Fundamentals (July 2010)
-Geometric Dimensioning and Tollerancing Applications (August 2010)
-Geometric Dimensioning and Tollerancing Stackups (September 2010)
LANGUAGES
Spanish
Spoken: Intermediate
Written: Intermediate
Read: Intermediate
PROFESSIONAL PUBLICATIONS
PRINCIPAL AUTHOR/PRESENTER:
1. Watson, B. T., and Lai, F. C., 2007, "Electrohydrodynamic Drag Reduction on a
Circular Cylinder," 2007 ASME Graduate Student Research and Innovation Conferen
ce (CD-ROM).
2. Watson, B.T., "Toward Whole-Body Contact Sensing and Grasp Control", Poster p
resentation at the OU Research Experiences Symposium, October 28, 2006
3. Fagg, A. H., Watson, B., Wang, D., Southerland, J. (2006), Whole-Body Contact
Sensing, Presentation, Dexterous Robotics Laboratory, NASA/Johnson Space Center
, May 22
3. Watson, B. T., "Empirical Modeling of Robot Arm Statics", OU Research Experie
nces Symposium, October 2005
CONTRIBUTING AUTHOR:
1. Wang, D., Watson, B. T., Fagg, A. H. (2007) A Switching Control Approach to H
aptic Exploration for Quality Grasps, Proceedings of the Robotics: Science & Sys
tems 2007 Workshop on Sensing and Adapting to the Real World, Electronically Pub
lished
REFERENCES
Robert Espinosa
Lockheed Martin
Project Lead
Phone Number: 281-333-6088
Email Address: robert.espinosa@lmco.com
Reference Type: Professional
Jeff Skrocki
Lockheed Martin
Section Manager
Phone Number: 817-777-4181
Email Address: jeff.skrocki@lmco.com
Reference Type: Professional
ADDITIONAL INFORMATION
COMPUTER SKILLS:
-Project Link Web Based Project Collaboration
-Microsoft Project
-Minitab
-Crystal Ball Simulation and Forecasting Software
-ANSYS 11.0 Multiphysics Simulation
-FlowWorks Multiphysics Simulation
-SolidWorks Solid Geometry Modeling
-ProEngineer Solid Geometry Modeling
-ProMechanica Multiphysics Simulation
-AutoCAD
-MatLab
-MathCad
-C/C++
-Java
-Word
-Excel
-PowerPoint
-Outlook