You are on page 1of 8

Cat No-KVWIN-C

SUPER SMALL PLC

KV Series

Super Small PLC


With Smart Software For Windows to Reduce Debugging Time

S O F T W A R E

Easy Programming/Debugging With Desktop Simulation

The Ladder Builder for KV software creates sequence programs in Windows.


User-friendly operation and high-level programming capabilities make the Ladder Builder for KV ideal for beginners and experienced programmers alike.

* MS-windows and Windows are registered trademarks of Microsoft. Any other company name is registered trademark of that company.

Basic units

EXPANDABLE
With the KV series, its easy to expand the number of I/O ports to achieve the input/output ratio that suits your needs, KV-16E or KV-8E expansion units can be added in any combination of 4 (3 for KV-40, KV-80).

I/O Sample Configurations


Expansion units to be added Basic PLC model +8EXW (8/0) +8ET2W (4/4) +8EYRW (0/8) +16EXW (16/0) +16EYRW (0/16) +16EXW (16/0) +16EYRW (0/16) +16EYRW (0/16)

KV-10 10 I/O

KV-16 16 I/O

Expansion units (for I/O expansion)

Total I/O numbers KV-10 KV-40 In 6 14 (6+8) 4 (4+0) 32 (24+8) 16 (16+0) 56 (48+8) 32 (32+0) 10 (6+4) 16 (4x2+8) 28 (24+4) 28 (16+4+8) 52 (48+4) 44 (32+4+8) 38 (6+16x2) 4 (4+0) 56 (24+16x2) 16 (16+0) 80 (48+16x2) 32 (32+0) 6 (6+0) 52 (4+16x3) 24 (24+0) 64 (16x4) 48 (48+0) 80 (32+16x3)

Out 4 In 24 Out 16

KV-80

In 48 Out 32

The above table shows 4 typical example systems that you can configure with the KV Series.

KV-8E 4 input/output

KV-8EX 8 input

H A R DWA R E

Simple Configuration With Compact PLCs, Plus Fast Programming.


SUPER COMPACT
Small enough to fit just about anywhere. The KV series is designed to fit in your control panel, saving space and money.

FAST RESPONSE
The KV series can receive input pulses as short as 25 s, enabling direct connection to sensors and eliminating the need for a high-speed interface. A pair of 10 KHz counters are also built-in.

Simulate Without PLC


Our new Desktop simulator lets you simulate a program in operation before you connect your PLC.

KV-24 24 I/O

KV-40 40 I/O

KV-80 80 I/O
Expansion units (for analog I/O)

KV-8EY 8 output

KV-16EX 16 input

KV-16EY 16 output

KV-AD4 4ch input

KV-DA4 4ch output

Ladder Builder for KV ensures fast, easy programming and efficient desktop debugging

EDITOR
Easy Editing Using Windows Functions
Instruction selection window The user-friendly design allows data entry from a keyboard or a mouse. You can select and specify a device or command from a list provided by device type. This ensures error-free entry of target symbols. For fast programming, you can also enter the symbol directly by typing the command from the keyboard.

Usage list When creating Ladder diagrams, it can be difficult to keep track of addresses already used. The usage list displays which ones are used/available.

UNDO function The Ladder Builder for KV enables efficient editing. If you accidentally delete an instruction, you can undo the action simply by clicking the Undo button. The Redo button cancels Undo .

Auto-save function The Ladder Builder for KV automatically backs up your program at predetermined intervals. This protects your data from being lost due to a PC power loss or system crash.

Multi-file editing Multiple files can be edited simultaneously on the Ladder Builder for KV. You can freely cut and paste from one file to another.

SIMULATOR
Quick debugging without a PLC
Even without a PLC connected, the Ladder Builder for KV can simulate program execution. The execution can be checked without transferring the program to the PLC. By providing a single step execution function (forward or reverse) in addition to a regular scan execution function, debugging efficiency will be increased.

Forward/reverse single step execution You can easily find a problem in complex operations by checking the operation process by one step at a time.

Ladder Simulator enables direct checking of the ladder diagram execution By clicking an element in the ladder diagram, the simulator screen quickly appears which allows element setting/ resetting.

Monitor All Function Timers, counters and data memories can be checked simultaneously in multiple windows. For effective debugging, you can check devices at one time, which dont directly appear in the ladder diagram.

Registration Monitor The Ladder Builder for KV can display multiple timing charts of any devices simultaneously. This enables convenient checking of all element on/off timing.

MONITOR
Real time monitoring without stopping the machine
Ladder diagram and element on/off stands can be monitored real time. Timing charts can be monitored simultaneously.

Super Small And Fast PLC Full Of User-friendly Designs

43

Compact
The KV-10 (with 10 I/O) is about the same size as two general purpose relays. The KV-80 (with 80 I/O) is as small as a VHS videotape. KV series PLCs require minimal space on a control panel.

High-speed Operation
70
The KV series can receive an input as short as 25 s, enabling direct connection to sensors and eliminating the need for high-speed interfacing.

COUNTERS
The KV high speed counters count pulses as fast as 10kHz. They can count high-speed pulses without any delay from scan time. Four counter comparators provide control of both X-and Y-axes.

INTERRUPTS

60

KV-10

The KV Series provides four interrupt inputs. Interrupts can be executed within program routines in real-time without any scan time delay. The KV Series also gives you immediate on/off status.

PULSE ACQUISITION
Very small objects or objects traveling at high speeds can be detected by the KV Series without the need for a high-speed interface. The KV Series can receive input pulses as short as 25 s (HSP instruction).

Selection Chart
Type Model Number of inputs Number of outputs Type of output Type Model Number of inputs Number of outputs Type of output KV-10RW 6 4 KV-16RW 10 6 KV-24RW 16 8 KV-40RW 24 16 Basic unit KV-10T2W KV-80RW 48 6 32 4 Relay* Expansion unit KV-8ERW 4 4 Relay KV-8EYRW 8 KV-16EYRW 16 Relay* KV-8ET2W KV-8EYT2W 4 4 8 MOS-FET KV-16EYTW 16 BJT(NPN)
*Replaceable

KV-16T2W 10 6

KV-24T2W 16 8

KV-40T2W 24 16

KV-80TW 48 32 BJT(NPN)

Relay

MOS-FET

KV-8EXW 8

KV-16EXW 16

System Specifications
Model Arithmetic and control system Programming language Number of instructions Execution time (basic I/O instructions) Avg. number of steps Number of Inputs (base unit) Number of outputs (base unit) Number of connectable exp. unit Max. number of I/O avallable with exp. unit Exp. input units only:I/O Exp. output units only:I/O Internal utility relays (with latching function) Special utility relays Data memory (16 bits) Temporary memory (16 bits) KV-10 KV-24 KV-40 Stored program Ladder diagram and expanded ladder diagram Basic: 16, application: 34, arithmetic: 26, interrupt: 4 (8 programs) 1.0 s min., 1.92 s average 1.4 s min., 3.12 s average 500 steps 3000 steps 6 10 16 24 4 6 8 16 4 units max. 3 units max.* 74 80 88 88 70/4 74/6 80/8 72/16 6/68 10/70 16/72 24/64 160 800 160 1,000 words 32 words A total of 64 timers, up-counters, and up-down A total of 120 timers, up-counters, and up-down counters counters are provided as follows: are provided as follows: 0.1 s timer (0 to 6553.5 s) 0.1 s timer (0 to 6553.5 s) 0.01 s timer (0 to 655.35 s) 0.01 s timer (0 to 655.35 s) 0.001 s timer (0 to 65.535 s) 0.001 s timer (0 to 65.535 s) analog timer analog timer (0 to 24.9 s, 0 to 2.49 s, or 0 to 0.249 s) (two of 0 to 24.9 s, 0 to 2.49 s, or 0 to 0.249 s) 2 auto-reset up-counters (max. input response frequency: 10 kHz) 4 2 2 kHz max. (output from 0500), 1.5 kHz max. (output from 0501)
2 20 kHz max. (output from 0500), 1.5 kHz max. (output from 0501)

KV-16

KV-80

48 32 128 80/32 48/80

2,000 words

Timer/counter

High-speed counter High-speed counter comparator Direct clock pulse Memory switch Memory back-up Self-diagnosis Peripherals

16 Program memory: EEPROM, programs stored for 10 years min., rewritabie 50,000 times min. Data memory: data retained for 2 months min. by capacitors (at 25C) CPU and RAM errors Handheld programmer KV-P3E-01, memory cards M-2 & M-3, card reader/writer Z-1

*The KV-80 has 2 input channels (0300 to 0315, 0400 to 0415) for expansion units. Therefore,only up to 2 expansion input units can be connected.

Others
ANALOG TRIMMER
The analog trimmer enables you to abjust the values for timers/counters in real time, based on actual operating conditions. There are 2 analog timers in the KV-80, KV-40, and KV-24 controllers, and 1 in the KV-16 and KV-10.

Analog I/O Unit Specifications


Model Analog input range Input impedance Analog inputs Resolution KV-AD4 Voltage: -10 to +10 V Current: 4 to 20 mA Voltage: 1 M Current: 300 4 (4 channels) Input range 10 V 5 mV (1/4000) Input range 4 to 20 mA 4 A (1/4000) KV-DA4 Voltage: -10 to +10 V Current: 4 to 20 mA 0.5 max. (when voltage output mode is selected) 1 k (when voltage output mode is selected) 400 (when current output mode is selected) 4 (4 channels) Output range 10 V 5 mV (1/4000) Output range 4 to 20 mA 4 A (1/4000)

EEPROM
It delivers high-speed processing and large program storage capacity without the need for a backup battery. Programs are retained a minimum of 10 years with/without power.
Model Analog output range Output impedance
Minimum load resistance Maximum load resistance

TIMERS/COUNTERS
To control a high-speed production line, the KV is equipped with 1-ms timers. There are 120 timers/counters in the KV-80 KV-40, and KV-24 controllers and 64 in the KV-16 and KV-10. Up-down counters are also available in all KV Series controllers.

Analog outputs Resolution

CLOCK PULSE
The KVs clock pulse operates from 19Hz to 20kHz and is not delayed by scan time. This enables you to control stepper motors. Its on/off ratio can be preset and output pulses can also be internally counted automatically.

Power Supply Unit Specifications


Model Operation system KV-U6W Switching type 100 to 240 VAC (50/60 Hz) 10% 24 VDC 10% (Ripple: 240 m Vp-p max.) 0.8 A Approx. 210g

General Specifications
Power supply 24 VDC (+ 10% -20%) KV-10RW: 1060 mA 1. KV-10T2W: 1050 mA 1. KV-24RW: 1115 mA 1. KV-24T2W: 1060 mA 1. KV-80RW: 1235 mA 2. KV-80TW: 1135 mA 2. KV-8ERW: 805 mA 3. Expansion KV-8ET2W: 790 mA 3. KV-8EXW: 785 mA 3. unit KV-16EXW: 795 mA 3. KV-16RW: 1090 mA 1. KV-16T2W: 1055 mA 1. KV-40RW: 1055 mA 2. KV-40T2W: 950 mA 2. KV-P3E-01: 65 mA

Power supply voltage Output voltage Output current


Weight (brackets not inciuded)

Base unit Maximum current consumption

Input Specifications
KV-8EYRW: 850 mA 3. KV-8EYT2W: 830 mA 3. KV-16EYRW: 920 mA 3. KV-16EYTW: 870 mA 3. Rated voltage and current Threshold voltage (ON) Threshold current (OFF) Response time (selectable by program) interrupt response time (terminals 000 to 003) High-speed counter response time 24 VDC 7 mA (terminals 000 to 005) 5mA (other terminals) 19 V 2 mA 25 s/8 to 12ms (OFF ON) 75 s/8 to 12ms (ON OFF) 25 s (OFF ON) 35 s (ON OFF) 10 kHz max.

Ambient temperature Relative humidity Withstand voltage Noise immunity Vibration resistance

0 to 50 C (no freezing) 0 to 45 C (KV- P3E-01) 35 to 85 % 1500 VAC applied between power terminal and I/O terminal, and between terminals and housing (1 min) Noise generated by noise simulator: 1.5 kV p-p max. 1s and 50 ms 10 to 55 Hz, double amplitude of 1.5 mm max. applied in each of X,Y, and Z directions (2 hrs) 50 M min. between power terminal and I/O terminal, and external terminals and housing (measured by 500 VDC megohmmeter) No excessive dust or corrosive gas allowed KV-10RW: approx.140g KV-10T2W: approx.130g KV-16RW: approx.210g KV-16T2W: approx.190g KV-80RW: approx.610g KV-80TW: approx.510g KV-P3E-01: approx.230g KV-24RW: approx.260g KV-24T2W: approx.230g KV-40RW: approx.350g KV-40T2W: approx.290g

Insulation resistance Environment

Output Specifications
Type of output Rated load Relay 250VAC/ 30 VDC 2 A BJT 30 VDC 0.3 A 30 VDC 100 A max. 1V 50 m max. ON 10 ms max.
50 s max. (terminal 500 on KV-80TW :3 smax) 450 s max. (terminal 500 on KV-80TW :20 smax)

MOS-FET 30 VDC 0.6 A (terminal 500) 30 VDC 0.5 A (other terminals) 30 VDC 5 A max.

Base unit Weight

Max. voltage at OFF Leak current at OFF

KV-8ERW: approx.120g KV-8ET2W: approx. 00g 1 Expansion KV-8EXW: approx. 30g 1 unit KV-16EXW: approx.180g

KV-8EYRW: approx.140g KV-8EYT2W: approx.130g KV-16EYRW: approx.240g KV-16EYTW: approx.190g

Residual voltage at ON Resistance at ON OFF Switching time OFF ON 10 ms max.

1 max.
350 s max. (terminals 500 and 501) 2 ms max. (other terminals)

1. The values shown above are specified when the KV-P3E-01 handheld programmer, 4 units of the expansion unit KV-16EYRW, 1 unit of the expansion unit KV-AD4 and 1 unit of the expansion unit KV-DA4 are connected to the product. 2. The values shown above are specified when the KV-P3E-01 handheld programmer, 3 units of the expansion unit KV-16EYRW, 1 unit of the expansion unit KV-AD4 and 1 unit of the expansion unit KV-DA4 are connected to the product. 3. The values shown above are specified when 3 units of the expansion unit KV-16EYRW, 1 unit of the expansion unit KV-AD4 and 1 unit of the expansion unit KV-DA4 are connected to the product.

150 s max.

Relay service life :Mechaninal: 20 million operations min. Electrical: 100 thousand operations min. (20 times/min)

Dimensions
KV-10 s
2 x 5 mounting hole

KV-16 s KV-16E s KV-AD4KV-DA4


2 x 5 mounting hole

KV-24 s KV-U6W
2 x 5 mounting hole

79

35.4 70 91

99

35.4 90 111

99

35.4 90 111

44 60

39 43

31 65

39 43

48 80

39 43

KV-40 s
2x 5 mounting hole

KV-80 s
4x 5 mounting hole

99

35.4 90 111

99

35.4 90 111

78 110

39 43

160 200

39 43

KV-8E s
2 x 5 mounting hole

99

35.4 90 111

19 38

39 43

FAX Request Form


If you would like to know more, or you have an application to discuss, please complete the fax request form below. Name: Company: Address: Phone: Fax: I have an urgent application and would like an engineer to contact me. I would like to know more about other Keyence products. Please send me a general catalogue.

Visit Our Homepage for other keyence products at http://www.keyence.co.jp/

Specifications are subject to change without notice.

Worldwide Headquarters KEYENCE CORPORATION 1-3-14, Higashi-Nakajima, Higashi-Yodogawa-ku, Osaka, 533-8555, Japan PHONE: 81-6-379-2211 FAX: 81-6-379-2131
KEYENCE CORPORATION OF AMERICA PHONE: 201-930-0100 FAX: 201-930-0099 KEYENCE S & M SDN BHD Phone: 03-252-2211 Fax: 03-252-2131

European Headquarters KEYENCE (UK) LIMITED 504-510 Elder House, Station Square, Elder Gate, Milton Keynes MK9 1LR, U.K. PHONE: 01908-696900 FAX: 01908-696777
KEYENCE FRANCE S.A. PHONE: 01 47 92 76 76 FAX: 01 47 92 76 77 KEYENCE KOREA CORPORATION Phone: 02-563-1270 Fax: 02-563-1271 KEYENCE CORPORATION, 1997 KVWIN-C-3-0798 Printed in Japan KEYENCE SINGAPORE PTE LTD Phone: 392-1011 Fax: 392-5055

KEYENCE DEUTSCHLAND GmbH PHONE: 0711-7973710 FAX: 0711-7977799 KEYENCE (THAILAND) CO., LTD Phone: 02-934-6772~4 Fax: 02-934-6775

You might also like