You are on page 1of 8

JungleFlasher 0.1.76(166S) ======================================== Lite-On LT + support Benq LT + support JungleFlasher 0.1.75(152S) ======================================== Sammy LT 1.0 support Benq LT 1.

2 support JungleFlasher 0.1.74(138S) ======================================== Key Verification - thanks to C4eva ---------------------------------------Routines will validate a key against the attached drive 100% Routine added to: - DVDkey32 Extract, also as key ver is 100%, 6 dumps no longer necessary - LO83info Extract, also as key ver is 100%, 2 dumps no longer necessary - Source and Target context menus IO port refresh ---------------------------------------Extra checks to determine drive hardware type, as opposed the Inquiry info. Key is easily queryied from Samsung and Hitachi pre 78, can grab key, verify an d lookup KeyDB. Lite-On Barcode uniquely identifies drive, look-Up Barcode in KeyDB and verify Fancy icon on the Drive Properites group box and tooltip to display Key and Key DB info. Context menu on Drive Properties to peform KeyDb functions ( load files etc ) KeyDB --------------------------------------Now index by Lite-on barcode, barcode will be added at next refresh for rapid D rive ID. Added an new field call LastFile, this will point to file last used to update K eyDb. Useful if you want to refresh KeyDb with all your Lite-On files. This is used on Drive Properties Context Menu, to load an OFW. Dummy from KeyDB **New** -------------------------------------There are 3 parts to this - for and identified Lite-On this will use the verified key and grab all other dummy data and build it - for un-identified Lite-On, will test ALL keys in KeyDB and return on a succes sful hit, build dummy as above - for non lite-on, will test ALL keys in KeyDB and return on a successful hit. USB Com Port Enumeration --------------------------------------Will properly report device types in Vista and Win 7 - FTD2XX.dll dependancy re moved

JungleFlasher 0.1.73(103S) ======================================== LT v1.1 Support, both Benq and Lite-On General Support ---------------------------------------Hyperlinks in IRC tab now launch in Preferred Browser better support for windows 7 120dpi mode

JungleFlasher 0.1.72(101S) ======================================== Benq LT Support.

JungleFlasher 0.1.71(98S) ======================================== No Lite-On LT spoofing --------------------------------------No longer says copied ID strings when target is LT No longer Shows false spoof when LT is "spoofed" with older JF ver - previous versions are not forward compatible with LT - they may put spoof in place but LT will ignore it. Hitachi Support ---------------------------------------Bug fix - master checksum now set when auto-spoofing Stock Hitachi Master Checksum now set when spoofing stock Hitachi in firmtools. Bug fix - JF no longer crashes when saving encrypted Hitachi. General Support ---------------------------------------IRC tab that calls a Java IRC client in embedded browser window requires 2 dll's... included

JungleFlasher 0.1.70(86) ===================================== Foreign Language support --------------------------------------German, French, Greek and Portuguese added. Spanish, Italian and Russian to follow. Bug fix - Calib data not being flashed

JungleFlasher 0.1.70(85S) ========================================

Lite On Support --------------------------------------Auto-Load Lite-Touch firmwares Calibration data - spoof copies calibration data if present in source - dummy from traget will place calibration data in dummy v2 at same location Secret Inquiry - performed before LO83info to identify 83 v2 and abort sequence - performed for DVDKey, Lo83info and Dummy from iXtreme and added to dummy v2 to differientiate 83v1 & 83v2 Legacy cross spoofing - bug fixed, now working, sorry ;( New key locations - long suspected 74 f/w's with 0x1a000 and 0x1b000 key sectors, - both found recently, support added. Gerneral Support --------------------------------------Explorer contexts fixed for start in JF. Explorer contexts fixed for Win 7. Thanks go to Team Xecuter for their generous support to this project.

JungleFlasher 0.1.69(74S) ======================================== Firmtool Engine --------------------------------------Finally re-coded firmtool engine correctly - full support for encrypted lite-on, source and target - easier support for cross spoofing Port IO --------------------------------------Using Schtrom's driver portIO driver, which includes 64bit support. iXtreme 1.61 for lite-on --------------------------------------Will autoload iX 1.61 for Liteon Hitachi Support --------------------------------------Added new spoofing method for Hitachi. "Auto Spoof", will spoof inquiry and key on the fly directly from source buffer. Will use existing file or request for load if empty. KeyDB Viewer --------------------------------------

New keyDB, right click source tab. JungleFlasher 0.1.66(46) ======================================== Lite-On 83850c support --------------------------------------- added full LO83info extract, OpenKey to Dummy.bin - checks added to LO83info.bin.key load, blank data aborts - 140F0F1011B5223D79587717FFD9EC3A from bad LO83info extract will be rejected **** WARNING **** this uses Seacrest source, many thank.... BUT beware... use a spare drive to check the key Lite-On support General --------------------------------------Dump Dummy.bin from lite-On iXtreme file (in target context menu) Identify Barcode reversal - to detect and fix and use bad inquiry Barcode info - extra step to Manual spoofing to avoid bad barcode data Hitachi Support Updated --------------------------------------Stabilty success message is bypassed in Moddermode. General items Updated --------------------------------------Foreign Language Support - German - Portugueuse - Italian - French - Greek - Spanish (WIP)

JungleFlasher 0.1.65(27) ======================================== General items Updated --------------------------------------KeyDB and Log to Notepad fixed for windows 7 and foreign languages Lite-On-Erase --------------------------------------- Extra check added, Drive Serial is compared to Target f/w - a mismatch will cause a warning... Just in case user were - to hook up a new lite-on and forget to do DVDkey32 MtkFlash32 --------------------------------------- Disable related windows drive letters on Intro - Windows interfers with read-back verify as it thinks drive is - still present after into. This occured primarily with benq

- running ix > 1.41. The half tray unlock also give windows - drive letter. On intro, drive list is refreshed, scanned for - the drive on the current port and disabled if found.. Lite-On 83850c support --------------------------------------- ix 1.6 83850 support added ( cross spoofing of ix revs NOT supported ) - conversion of [barcode].bin.key to dummy.bin - Autoload dummy, auto-load ix, spoof ix - extract of [barcode].bin added, for repair

JungleFlasher 0.1.64(16) ======================================== General items Updated --------------------------------------Ctrl + F4 to open iXtreme from firmware folder to Target Added context menus to Source and target tabs Source - open f/w from working folder - clear source - update to key data base Target - open f/w from working folder - open f/w from .\firmware folder - clear target Removed - not allowing blank serial in for Lite-on Dummy.bin previously if serial was blank the iX file serial was left as is Warning changed for dummy.bin w/o serial, to mention is possibly ok. Added spoof support for new lite-on 83850C JF wil recognise a 83850C dummy.bin and spoof 74850C iX accordingly Manual spoof support for 83850C support added (still no confirmation of key extract via DVDkey32 method) Key Database in Registry --------------------------------------Database will be populated automatically from a dump. Ctrl + F10 to add/update key database from Source tab info Ctrl + F12 to launch notepad with key database Ctrl + F11 to create .csv from key database Added extra item to explorer context to load as source and add key to db iX will not autoload to target for this task can select mutliple f/w files, these will load in turn Hitachi Support Updated --------------------------------------Fixed bug in Rev 36 Ram Upload Dump Code All dumps are rev checked immediately, a failure to identify will abort sequence dumps from other drives and locked 79's (coming back empty) would proceed to k ey check and fail MTKFlash32 --------------------------------------Added warning message Yes/No to Flash Erase Button (default is No!) Added Esc to abort to flash read within auto reads in moddermode Bypassed Sammy-Un-Lock warning in ModderMode

JungleFlasher 0.1.62 ======================================== Release for iX 1.6 0800 for Samsung, Benq and Lite-On... Hitachi Support Updated --------------------------------------Windows drive enum changed successful Classic dump will detect and set correct drive type for pre 78 drives . Inquiry of spoofed drives would select incorrect version. DVDKey32 Support Updated --------------------------------------better support for Maximus USB Xtractor - using FTDI api FTD2XX.dll General items Updated --------------------------------------Improved launch times

JungleFlasher 0.1.60 ======================================== Release for iX 1.6 for Samsung, Benq and Lite-On... Jf will now target 1.6 files by default Hitachi Support Updated --------------------------------------Right Click windows drive list for context to open/close drive tray DVDKey32 Support Updated --------------------------------------Added Support for USB Extractor Switch in Vista, for remote launch of DVDkey32 f rom probe

JungleFlasher 0.1.59 - cleanup to 0.1.55 ======================================== DVDKey32 Support Updated --------------------------------------Added Support for USB Extractor Switch, for remote launch of DVDkey32 from probe Added optional delay on dvdkey32... allow time for probe.... delay32 in reg, def ault is 0, max 20 sec

Hitachi Support Updated ---------------------------------------

Added Stop-Disk to Hitachi commands, People were still putting in a disk, a habi t from FWTB days, commands would fail and the drive would crash. Improvements to Ram upload dump, should dump in 1 - 1.5 sec... added timer for t he fun of it... Introducing USmodeB with JungleUSB drivers, for Hitachi 1. JungleUSB drivers allow Hitachi on USB to be seen in Mode-A, mode-B comma nd can be issued 2. at power up, you may need to open/close the drive to allow windows to PnP fully 3. Send USmodeB - JF will enumerate all windows drive letters and find any H itachi, JF will send mode-b

General items Updated --------------------------------------Added, test for port IO.... JF will scan device tree for PortIO, 4 outcomes are possible i. port io running aok ii. port removed iii. port not installed iv. port io has an error Fixed, Ctrl f7 for Drive pororties on PortIO, drives were not being detected Added donate icon, users complained they conuldn't see.... ;-)

JungleFlasher 0.1.55 - cleanup to 1.51 ======================================= We have probably added or changed alot more but this is what we could remember. Hitachi Support Updated --------------------------------------- Portio will only be enabled with "Via Only" ticked, as it was only added t o support Via w/o drivers - Via card must also report status (Code 39)... no drivers loaded - Mode Select method removed from Port IO. Mode Select is for USB support, p ort IO does not support USB. Modder Mode --------------------------------------- Now stops on bad device ID. Splash Screen --------------------------------------- Context enable/disable removed from splash ( added as a ctrl key) Advanced Ctrl F Keys

--------------------------------------- Ctrl + F5 key, set modder mode backup directory, clear folder to disable i t - Ctrl + F6 key, hitachi read block size 100 --> 2000 ( 78 and 79 FK models will fail on this ) - Ctrl + F7 key, set working folder in modder mode... clear all tabs and sav e log - Ctrl + F8 key, enable "Free Flash" and "Ram Poke" in Hiatachi - Ctrl + F1 key, enable context menus - Ctrl + F2 key, disable context menus Lite-On Dummy.bin Serial Fixer --------------------------------------- Bug, fixer added drive barcode byte swapped to Identify string, fixed. Sammy flash --------------------------------------- was failing for at least one user.. typo in last cleanup. fixed. Port Inquiry --------------------------------------- Timeout in port Inquiry for drive properties extended from 200ms to 1s Lite-On-Erase --------------------------------------- Dead time after l-o-erase extended from 2s to 3s - dots and timer added for better appearance.

You might also like