You are on page 1of 92

Verizon - East Access Service Request (ASR) Order Business Rules

Verizon - East Business Rules for the construction of ASRs for users ordering Unbundled Network Elements (UNEs)

Serving: the former Bell Atlantic Regions CT (Greenwich/ Byram), MA, ME, NH, NY, RI, VT, DC, DE, MD, NJ, PA, WV, and VA and the former GTE Region in VA

Version 27
(ASOG 27)
Release Date: September 2003 Publication Date: July 2003

Notices Disclaimer
This documentation is for general information purposes only. This documentation does not obligate Verizon to provide services in the manner described herein. Verizon reserves the right as its sole option to modify or revise the information contained in this documentation at any time without prior notice. In addition to and without limitation of any other limitation of liability of Verizon or its affiliated companies set forth in an applicable contract or tariff, or elsewhere, in no event shall Verizon or its affiliated companies, or their agents, employees, directors, officers, representatives, or suppliers, be liable under contract, warranty, tort (including but not limited to the negligence of Verizon or its affiliates), or any other legal theory, for any incidental, consequential, special or indirect damages arising from or relating to this document or its contents, even if advised of the possibility of such damages. In this document, any usage of Verizon, VZ or state abbreviations refers to territories served by the former Bell Atlantic Corporation (fBA) or the former GTE (fGTE) territory in Virginia. 2002-2003 Verizon Corporation All rights reserved.

Document History
Version Number 27 26 25.2 25.1 25 24.2 24.1 24 23.2 23.1 23 22 21.4 21.3 21.2.2 21.2.1 21.2 21.1 21. 20. 19.BA Last Modified Date 07/02/03 11/13/02 09/18/02 06/26/02 05/22/02 03/06/02 01/04/02 11/07/01 08/08/01 06/30/01 03/28/01 7/19/00 4/25/00 4/12/00 3/29/00 3/15/00 3/9/00 12/14/99 5/13/99 3/03/99 2/10/99 Implementation Date 09/13/03 03/10/03 10/01/02 09/07/02 08/03/02 05/20/02 03/18/02 01/19/02 10/20/01 8/25/01 6/9/01 9/23/00 6/30/00 6/17/00 5/20/00 5/20/00 5/20/00 2/19/00 9/25/99 2/20/99

Notes: 07/02/03 Version 27 Document Updates to OBF ASOG Version 27 with Verizon business rules 11/13/02 Version 26 Document updates to OBF ASOG Version 26 with Verizon business rules (CR2747). 09/18/02 Version 25.2 document updates associated with collaborative agreements regarding no facility condition. 06/26/02 Version 25.1 Document updates associated with ordering new products and changes associated with ordering dark fiber. 05/22/02 Version 25 Document updates to OBF ASR Version 25 with Verizon business rules. 03/06/02 Version 24.2 Document changes regarding phase 2 to adopt uniform interfaces and business rules in PA and VA. 01/04/02 Version 24.1 Document changes regarding phase 1 to adopt uniform interfaces and business rules in PA and VA. 11/07/01 Version 24 Document updates to OBF ASR Version 24 with Verizon business rules. 08/08/01 Version 23.2 Document changes regarding Voice Grade and DS0 EEL Loops ordering. 06/30/01 Version 23.1 Document changes regarding lease arrangements and location information. 03/28/01 Version 23 Document updates to OBF ASR Version 23 with Verizon business rules. 7/19/00 Version 22 Document updates to ASR Version 22 with BA business rules. 4/25/00 Version 21.4 Document to change a field to optional and other changes based on collaborative discussions. 4/12/00 Version 21.3 Document to shade a field and based on collaborative discussions, change a note. 3/29/00 Shade fields not available when ordering UNEs and remove Pending CLEC Review. 3/15/00 Version 21.2.1 Document to add valid CLLI code entries. 3/09/00 Version 21.2 Document updates based on collaborative discussions 12/14/99 Version 21.1 Document updates based on collaborative sessions. 5/13/99 Version 21 Document updates to ASR Version 21 with BA business rules. 3/03/99 Version 20 Document to update BA business rules to ASR Version 20. 2/10/99 19BA Document to provide BA - North and BA - South business rules.

Verizon ASR Business Rules v 27 Final

TABLE OF CONTENTS
1 2 3 DOCUMENT OVERVIEW ............................................................................................................. 1-1 1.1 DOCUMENT STRUCTURE ............................................................................................................. 1-1 ASR FORM COMPONENTS.......................................................................................................... 2-1 2.1 FORM TABLE DEFINITIONS .......................................................................................................... 2-1 ASR FORMS TABLES .................................................................................................................... 3-1 3.1 INTRODUCTION ........................................................................................................................... 3-1 3.1.1 Typographical Conventions ....................................................................................... 3-13-1 3.2 ASR - ACCESS SERVICE REQUEST FORM .................................................................................... 3-2 3.3 TRUNKING FORM ............................................................................................................... 3-223-23 3.4 TRANSPORT FORM ............................................................................................................. 3-343-35 3.5 ACI ADDITIONAL CIRCUIT INFORMATION FORM ............................................................ 3-443-45 3.6 SALI - SERVICE ADDRESS LOCATION INFORMATION ........................................................ 3-503-51 3.7 TQ - TRANSLATION QUESTIONNAIRE ................................................................................ 3-563-57 3.8 C/NR - CLARIFICATION / NOTIFICATION REQUEST FORM.................................................. 3-673-68 3.9 CN - CONFIRMATION NOTICE FORM .................................................................................. 3-713-72 4 APPENDIX........................................................................................................................................ 4-1 4.1 APPENDIX A: TYPE OF CHANGE MATRIX .................................................................................... 4-1 4.1.1 Version 26 - 03/10/03................................................................................................. 4-14-1 4.2 APPENDIX B: CHANGES MATRIX ................................................................................................ 4-2 4.2.1 Summary of Changes ................................................................................................. 4-24-2

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003

1.1 Document Structure

Verizon ASR Business Rules v 27

1 Document Overview
This Business Rules for Access Service Request (ASR) document describes the fields used for the communication of ASR business process requests between CLECs and Verizon. The document contains a description of the forms and fields details.

1.1 Document Structure


Section 1, Document Overview describes document organization and the contents of each Section. Section 2, ASR Forms Components, describes the components of a forms data element. Section 3, ASR Forms Tables, contains tables that provide specific information regarding valid field entries for ASR forms. Section 4, Appendices, contains tables that summarize and highlight business rules changes.

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003

1-1

2.1 Form Table Definitions

Verizon ASR Business Rules v 27 Final

2 ASR Form Components


This section provides specific information regarding certain components of an Access Service Request as well as the definition of each form field.

2.1 Form Table Definitions


The form tables contain eight (8) specific columns. Following is a description of each one of these columns: COLUMN 1 This column provides numbering of fields for easy reference. FIELD This column provides the field name abbreviation for each field on a particular form. DATA DESCRIPTION This column provides a full description of the field. LENGTH This column provides the maximum length of each field. TYPE This column provides specific data characteristics for each form field. Alpha/Numeric (A/N) means that there are no restrictions on the type of characters permitted for that element; Alpha (A) indicates that only alphabetic characters are permitted and Numeric (N) indicates that only numbers are permitted. USAGE This column provides the appropriate requirements for the population of each field within a particular request. Indicates the field must be populated Required Indicates the field may or may not be populated Optional Conditional - Indicates the field is dependent upon the relationship to another field as specified in the Notes and Conditions column

VALID ENTRIES This column provides specific entries that are valid for some fields. NOTES AND CONDITIONS This column provides the field definition and additional information regarding a field such as requirements for conditional fields.

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003

2-1

3.1 Introduction

Verizon ASR Business Rules v 27 Final

3 ASR Forms Tables


This section contains tables that describe the forms used when ordering Unbundled Network Elements from Verizon via Access Service Requests.

3.1 Introduction
All forms have a unique set of fields. The tables in this section provide a detailed presentation of the fields associated with a form and the usage of those fields that will result in a service request. References to New York (NY) include Connecticut.

3.1.1 Typographical Conventions


Different typographical conventions are used throughout Section 3 and are as follows: Gray shaded fields and valid entries are not applicable in Verizon when the UNE field on the ASR Form is Y. The use of shaded fields and/or valid entries is at your discretion. Italic text indicates fields needed to permit implementation of local Verizon requirement. These fields must be provided as defined within the field Notes and Conditions. Verizon cannot process your service requests for unbundled network elements without you following this information.

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003

3-1

3.2 ASR - Access Service Request

Verizon ASR Business Rules v 27

3.2 ASR - Access Service Request Form


Required form for all requests using ASR forms.

ASR Form - Specific Data


1. Field CCNA Data Description Customer Carrier Name Abbreviation Length 3 Type A Usage Required Valid Entries IAC Code CUS = Casual customer Notes And Conditions Identifies the COMMON LANGUAGE IAC code for the customer submitting the ASR and receiving the Confirmation Notice Form (CN) and the Clarification / Notification Form (C/NR). This code is established prior to the submission of the ASR. When UNE field = Y, CUS is prohibited. Identifies the customers unique purchase-order or requisition number that authorizes the issuance of this request or supplement. The Purchase Order Number may be reused after two years from the due date of the original request. Identifies the customers version number. Any reissuance can use this entry to uniquely identify the form from any other version. Identifies the number that may be generated by the providers mechanized systems, pre-assigned to the customer by the provider, or manually assigned by the provider to identify a customers request for service. Required when ASR NO is pre-assigned Required on all supplements when PON is not unique. Otherwise optional. An indicator used to identify an order being sampled for quality control purposes. Identifies the provider service center. For UNEs in MA, ME, NH, RI & VT = NE01 For UNEs in NJ = NJ01 For UNEs in NY = NY01 For UNEs in DE & PA = PA01 For UNEs in DC, MD, WV & VA = CP10 Identifies the Exchange Carrier requesting local services. A four alpha/numeric character code structure for all Exchange Carriers in North America and certain U.S. territories maintained by NECA. Required when ordering local interconnection services or unbundled network elements. Required when UNE field = Y or ordering local services. Otherwise prohibited. Use Operating Company Number (OCN)

2.

PON

Purchase Order Number

16

A/N

Required

3. 4.

VER ASR NO

Version Identification Access Service Request Number

2 18

A/N A/N

Required Conditional

5. 6.

SPA ICSC

Special Action Indicator Interexchange Customer Service Center

2 4

A/N A/N

Optional Required

Position 1 is for customer use only Position 2 is for provider use only CP10 NE01 NJ01 NY01 PA01

7.

CC

Company Code

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-2

3.2 ASR - Access Service Request


Field 8. UNE Data Description Unbundled Network Elements Length 1 Type A Usage Conditional Valid Entries Y = Ordering unbundled elements

Verizon ASR Business Rules v 27


Notes And Conditions Identifies this request is ordering unbundled network elements for local service. Optional when the CC field is populated and the first position of the REQTYP field is M, S, or L, otherwise prohibited 17 1 2 10 A/N A N A/N Required Conditional Conditional Required Required when ordering UNEs. See REQTYP field notes for UNEs. Identifies the date and time that the Access Service Request is sent by the customer. Indicates that a quotation charge for special construction is authorized. Optional when the ACT field is N, C or T, otherwise prohibited. Identifies a customer request for the provider to call the LCON at a desired time prior to dispatch out of a service technician for service installation or disconnect. Prohibited when the UNE field is Y, otherwise optional. Identifies the customers desired due date. The actual due date may be different from that desired because of factors such as availability of facilities and quantity, complexity, and impact on local service of circuits involved. On disconnect requests, this date represents the date billing is to stop on the involved circuit(s) and can be no earlier than the date the request is received by the provider. When different due dates are required, these dates are stipulated using a separate request for each desired due date. For example, a total of 50 circuits are desired and the customer wants them at a rate of 10 per day. Therefore, five ASR forms may be submitted stipulating this requirement. Provides special handling instructions for the connection or disconnection of this request, such as, time of day when service should be disconnected. Prohibited when the ACT field is R, Prohibited when the UNE field is Y Otherwise optional. Identifies the project to which the request is to be associated. Required when the ACT field is N or D and the CCVN field is populated, otherwise optional. Identifies the quotation tracking number assigned by the provider in response to a provisioning arrangement inquiry, e.g., diversity. Identifies the pre-negotiated plant test date for the start of overall testing of the service requested on this ASR. Optional when the PROJECT field is populated, otherwise prohibited. Identifies the pre-negotiated facility plant test date for the start of overall testing of the switched access facilities being requested on this ASR. Optional when the first position of the REQTYP field is not R and the PROJECT field is populated, otherwise prohibited.

9. 10. 11. 12.

D/TSENT QA CBD DDD

Date and Time Sent Quote Authorized Call Before Dispatch Desired Due Date

13.

FDT

Frame Due Time

A/N

Conditional

14.

PROJECT

Project Identification

16

A/N

Conditional

15. 16.

CNO PPTD

Case Number Project Plant Test Date

12 10

A/N A/N

Optional Conditional U.S. Standard Metric Format U.S. Standard Metric Format

17.

PFPTD

Project Facility Plant Test Date

10

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-3

3.2 ASR - Access Service Request


Field 18. NOR Data Description Number of Requests Length 4 Type N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies both specific ASR and total quantity of Access Service Requests within a group of ASRs being ordered. In order to facilitate the process, at least the first related ASR should describe or list the total RPONs used when RPON is not the same for all such requests. For example, six ASRs are to be associated and individual PONs and RPONs are being used. All service types must be identical for such grouping of like orders. Required when the TQ field is populated and a total of two or more ASRs are associated with the translation questionnaire, otherwise optional. Identifies the percent Intrastate IntraLATA usage for use with IntraLATA competition. This field may apply whenever PIU is less than 100. Prohibited when the PIU field is not populated or is 100. Prohibited when the first position of the REQTYP field is or R. Otherwise optional. Identifies the requirement for a Basic Serving Arrangement (BSA), which is the minimum necessary transport arrangement for the delivery of the unbundled network features and functions, or for a Basic Service Element (BSE) associated with a Basic Serving Arrangement. Prohibited when the CC or WST field is populated, otherwise optional.

19.

LUP

Intrastate IntraLATA Usage Percentage

Conditional

1 to 100

20.

BSA

Basic Serving Arrangement

Conditional

Y = unbundled ordering

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-4

3.2 ASR - Access Service Request


Field REQTYP Data Description Requisition Type and Status Length 2 Type A Usage Required Valid Entries 1st character (see notes for use) M = Trunking (FG B, C, D. SAC NXX, Wireless and Local) L = CCS Link or Unbundled STP Port S = Special Access, Full Time / Part Time Television or Program Audio, DNAL Switched Access Facility, Unbundled Dedicated Transport, Unbundled Multiplexer A = Switched Access Feature Group A E = End User Special Access, DNAL, Part Time/Full Time Television or Program Audio R = Ring V = Broadband Services W = WATS Access Lines X = Broadband End User Services 2nd character (Service Request) A = Manual/mechanized C = Manual/mechanized F = Verbal H = Verbal G = Access Service Request follow up to verbal nd 2 character (Firm Order) D = Manual/mechanized K = Verbal J = Access Service Request follow up to verbal N = New Installation or increase in capacity D = Disconnection or decrease in capacity M = Inside move of the physical termination within a building T = Outside move of end user location C = Change or modification to an existing service. R = Record Activity for ordering administrative changes.

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the type of service being requested and the status of the request. The first character of REQTYP specifies the type of service/element. The second character of REQTYP specifies the status of the request in the four step order process. When UNE field = Y, first position entries below are the only valid entries and represent: L = SS7 Unbundled STP Port M = Dedicated Trunk Port and Extended Dedicated Trunk Port (EDTP) Type 1* & Type 2* S = Unbundled Interoffice (IOF) Transport, Unbundled Multiplexer (Mux), Unbundled DS1, DS3, OC3 and OC12 Loops, DS1 and DS3 Multiplexed Expanded Extended Loop (EEL), and Voice Grade, DS0, DS1 & DS3 Expanded Extended Loops, Unbundled Dark Fiber, Dedicated Transit Service (DTS), Unbundled Feeder Sub-loop Element (UFSE)

21.

22.

ACT

Activity

Required

Identifies the activity involved in this service request. C may not be used to migrate to or from Unbundled Network Elements. In DC, DE, MA, MD, ME, NH, NJ, NY, PA, RI, VA, VT & WV for UNE IOF and DTS, valid entries are N, D, C and R. M and T are not applicable. In DC, DE, MA, MD, ME, NH, NJ, NY, PA, RI, VA, VT and WV for UNE DS1, DS3, OC3 and OC12 Loops and Voice Grade, DS0, DS1 & DS3 EEL Loops, valid entries are N, D, C, T and R. M is not applicable (VZ is not responsible for inside wire). T is only associated with Loops or EEL Loops combined with EEL transport. For UNE Dark Fiber, valid entries are N, C and D. "C" may only be used associated with parallel provisioning For UFSE, valid entries are N and D. C, M and T are not applicable.

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-5

3.2 ASR - Access Service Request


Field ACTI Data Description Activity Indicator Length 1 Type A Usage Conditional Valid Entries A = Trunk Group Augment without translation changes B = Trunk Group Augment with translation changes C = New Trunk Group D = Partial Trunk Group disconnect E = Full Trunk Group Disconnect and Traffic Re-route F = Full Trunk Group Disconnect and No Traffic Re-route

Verizon ASR Business Rules v 27


Notes And Conditions Activity Indicator will allow the customer to specify whether the order is an augment or a new trunk group or a partial or full disconnect Required when the first position of the REQTYP field is M and the ACT field is N. Valid ACTI values must be A, B, or C. Required when the first position pf the REQTYP field is M and the ACT field id D. Valid ACTI value must be D, E, or F.

23

24

QSA

Quantity Service Address Location Information

Conditional

Identifies the total number of Service Address Location Information Forms being sent by the customer. Required when the ACT field is N or T and the first position of the REQYTP field is S, E, W, V or X and the first position of any PRILOC / SECLOC field is an E. Required when ACT = N or T and 1st position of REQYTP = S, ordering UNE DS1, DS3, OC3 and OC12 Loops, Voice Grade, DS0, DS1 and DS3 EEL Loops in combination with EEL transport or UNE Dark Fiber Loops*. Required when the ACT field is N or T and the 1st position of the REQTYP field is R and the 1st position of the PRILOC field is an E and the SPOT (PRI) field is not a CLLI Code on the RING or ARI Form. Required when the ACT field is N or T and the 1st position of the REQTYP field is A and the NSL field on the FGA Form is populated. Prohibited when the first position of the REQTYP field is M: or Prohibited when 1st position of REQTYP = E, W, V, X or R and UNE field is populated. Otherwise optional. * where available Identifies the type of wireless service being requested. Prohibited when the first position of the REQTYP field is E,S, W, L, R, V or X, otherwise optional.

25

WST

Wireless Service Type

Conditional

26.

LATA

Local Access Transport Area

Optional

Prohibited when the UNE field is populated. Identifies the geographical area for service being provided.

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-6

3.2 ASR - Access Service Request


Field 27. RTR Data Description Response Type Requested Length 2 Type A/N Usage Required Valid Entries D = Send DOC only F = Send FOC only S = Send FOC and DLR; CDLRD waived N = No response requested 1-10 = Send FOC and DLR; CDLRD required

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the type of confirmation response requested by the customer. D is prohibited when the first position of the REQTYP field is E, R or W, or the ASC-EC field is populated, or the second position of the TQ field is N or X. D is prohibited when the ACT field is M or R. S is prohibited when the ACT field is M or R. N = no response requested. A numeric entry indicates the number of working days that the customer requires to confirm the Design Layout Report (DLR) and will be added to the overall interval. 1-10 prohibited when the ACT field is M or R. D is prohibited when the UNE field is Y.

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-7

3.2 ASR - Access Service Request


Field 28. SUP Data Description Supplement Type Length 1 Type N Usage Conditional Valid Entries 1 = Cancel (indicates that the pending order is to cancelled in its entirety) 2 = New Due Date (indicates that the pending order requires only a change of due date) 3 = Other (any other change to a confirmed request) 4 = Correction (indicates that this request is being issued to correct a previous request for which a firm order confirmation has not been received)

Verizon ASR Business Rules v 27


Notes And Conditions A supplement is any new iteration of an ASR. The entry in the SUP field identifies the reason for which the supplement is being issued. For valid entry of 1: If the pending order was already completed as ordered, a separate request must be sent instead of the supplement. Valid for Service Requests and Firm Orders whether or not they have been through the confirmation phase. For valid entry of 2: Indicates the pending order requires a change of due date. The new due date is specified in the DDD field, desired due date. The new desired due date can be no more than 30 calendar days greater than the original due date. If the request is to establish a due date sooner than the current due date then the EXP field must contain a Y when less than the standard interval. Valid for requests which have a Firm Order Confirmation or a Design and Order Confirmation. For valid entry of 3: This may affect the previously agreed upon due date. Partial cancellations should also be entered with a 3 in the SUP field. A request for a change in Due Date in conjunction with other changes to a pending order should be submitted with a 3 in the SUP field. The new desired due date can be no more than 30 calendar days greater than the original due date. If the request is to establish a due date sooner than the current due date then the EXP field must contain a Y when less than the standard interval. This entry is also to be used for supplements that are a result of provider changes after the Firm Order Confirmation (FOC) or a Design and Order Confirmation (DOC). Valid for requests which have a Firm Order Confirmation or a Design and Order Confirmation. Requires an entry in the REMARKS field to identify the changes. The remainder of the request must be identical to the original request issued. For valid entry of 4: Valid for Firm Orders that have not been through the confirmation phase and Service Requests that may or may not have been confirmed. Requires an entry in the REMARKS field to identify the changes. The remainder of the request must be identical to the original request issued. Prohibited on initial requests. Prohibited when changing a service request to a firm order. Prohibited when changing service type which results in a change to first character of the REQTYP field. Otherwise required

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-8

3.2 ASR - Access Service Request


Field 29. AFO Data Description Additional Forms Length 4 Type A Usage Conditional Valid Entries 1st position Y = Additional Circuit Information (ACI) Form 2nd position Y = Testing Service Request (TSR) Form 3rd position Y = Network Assignment Information (NAI) Form th 4 position Y = End Office Detail (EOD) Form

Verizon ASR Business Rules v 27


Notes And Conditions Indicates which additional forms are being submitted with this request. Required when the associated request form(s) is applicable and sent. Position 1 entry required for a supplement canceling all circuits contained on the initial ACI records; each individual circuit record on the supplement would carry a CKTACT = K. Position 2 entry is prohibited when the UNE field is populated, otherwise optional for supplement of ASR sent with a TSR. Absence of entry in position 2 on any supplement indicates Testing Services are no longer requested. When position 3 is populated and the first position of the REQTYP field is not equal to R and the QTY field is greater than one (1), character position 1 is required. Otherwise prohibited. Position 1 is required when the associated request form is applicable and sent. Positions 2, 3 and 4 are prohibited when UNE field =Y. Identifies the total number of NAI Circuit Detail sections sent by the customer. 1st position A = no TQ attached S = SAC only B = FGB Translations U = FGB Translations and SAC D = FGD translations T = FGD translations and SAC L = Local Translations C = Code (NPA/NXX/X) Translation Routing Only M = Local translations and Code Translation Routing W = Wireless translation X = Wireless translations and Code Translation Routing 1-9 = TQ on file nd 2 position Y = Trunking Form (trunk activity) N = No Trunking Form X = Trunking Form (no trunk activity) E = STP Translation changes Y = Expedite charges authorized Required when the third position of the AFO field is Y, otherwise prohibited. Indicates that a translation questionnaire is being submitted. When the first position of TQ is A, the ASR which has the TQ Form attached will be identified in the RPON field. When the first position of TQ is L, M, W, X or C, entries in the CC and / or WST fields are required. When the first position of TQ is not L, M, W, X or C, entries in the CC and/or WST field are prohibited. The second position of X indicates a Trunking Form is provided for system requirements rather than provisioning purposes. When the ACT field is N or D, a second position of N or X is prohibited. When first position of TQ field is E the second position must be an X When first position of TQ field is E the first position of REQTYP field must be an L and ACT field must be C. Required when the ACT field is N, C, D or R and translations are affected, otherwise prohibited.

30. 31

QNAI TQ

Quantity Network Assignment Information Translation Questionnaire Request

2 2

N A/N

Conditional Conditional

32.

EXP

Expedite

Conditional

Indicates that expedited treatment is requested and any charges generated in provisioning this request (e.g., additional engineering charges or labor charges if applicable) will be accepted. Required when desired due date is less than the standard interval for the provisioning of the service and the ACT field is not D Prohibited when the ACT field is D, except outward WATS service. Otherwise optional.

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-9

3.2 ASR - Access Service Request


Field AENG Data Description Additional Engineering Length 1 Type N Usage Conditional Valid Entries 1 = overtime engineering 2 = engineering connections when more than one provider is providing the access service. 3 = overtime engineering and engineering with other providers 4 = other engineering

Verizon ASR Business Rules v 27


Notes And Conditions Indicates that if additional engineering is required, an estimate of the charges is to be forwarded to the initiator of the request. * A valid entry of 4, other engineering, includes authorization to Verizon to change the UNE request to a Special Access Service request when Verizon encounters a no facility condition during the facility check for the requested UNE, i.e., DS1 or DS3 Loop, DS1 or DS3 EEL Loop or DS1 or DS3 Interoffice Transport. No estimate of charges will be forwarded to the initiator. Optional when the ACT field is N, C, M or T, otherwise prohibited. * where available Indicates that additional labor is requested and charges will be accepted in conjunction with this Access Service Request, (e.g., Sunday or out of normal business hour installation is being requested). Optional when the ACT field is N, C, M or T, otherwise prohibited.

33.

34.

ALBR

Additional Labor

Conditional

35.

AGAUTH

Agency Authorization Status

Conditional

1 = Overtime installation 2 = Testing with other providers 3 = Other labor 4 = Overtime installation and testing with other providers 5 = Overtime and other labor 6 = Testing with other providers and other labor 7 = Overtime installation, testing with other providers and other labor E = authorization previously provided N = new authorization B = blanket authorization was previously provided U.S. Standard Metric Format

Indicates that a customer is acting as another customers agent. Required when the customer is acting as a customer agent, otherwise optional. Required when UNE field = Y and ordering DS1, DS3, OC3 or OC12 Loops or Voice Grade, DS0, DS1 or DS3 EEL Loops in combination with EEL. Identifies the date appearing on the agency authorization which was previously submitted to the provider. Required when the AGAUTH field is E or B, otherwise optional. Identifies the name of the customer that originated this request when that customer will only have a limited amount of exchange access and has not been assigned a CCNA, (Customer Carrier Name Abbreviation).

36.

DATED

Date of Agency Authorization Customer Name

10

A/N

Conditional

37.

CUST

25

A/N

Conditional

38.

LA

Lease Arrangement

Conditional

Y = Yes

Required when the CCNA field is CUS, otherwise optional. Indicates there is a lease arrangement associated with the ACTL and ACNA identified. Required when a lease arrangement exists, otherwise prohibited. When there is a lease arrangement, VZ requires the name of the transport owner representative in the LANM field. Identifies the date appearing on the lease arrangement. Required when the LANM field is populated, otherwise prohibited. Indicates the name of the transport owner (lessor) representative who signed the lease arrangement. Optional when the LA field = Y, otherwise prohibited. Required when the LA field = Y, otherwise prohibited

39. 40

LADATED LANM

Date of Lease Arrangement Lease Authorization Name

10 15

A/N A/N

Conditional Conditional

U.S. Standard Metric Format

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-10

3.2 ASR - Access Service Request


Field 41. FBA Data Description Facility Billing Arrangement Length 4 Type A Usage Conditional Valid Entries 1st position A = Shared Network B = Lease Back C = Split Billing - All elements D = Split Billing 2nd through 4th Positions Y = Indicates the requirement of split billing on the respective element EF = Entrance facility DT = Direct Transport MUX = Multiplexing

Verizon ASR Business Rules v 27


Notes And Conditions Indicates a special arrangement has been negotiated between the host customer of a higher level service and the subsequent customer of the lower level service. Required when the ACT field is N, C or T and the ACNA field is different from the ACNA associated with the facility (CFA and/or SCFA) and the UNE and CC fields are not populated. Optional when the ACT field is R and the ACNA field is different from the ACNA associated with the facility (CFA and/or SCFA) and the UNE and CC fields are not populated. Otherwise prohibited. Identifies all services associated with a particular fiber based network. Also may identify customer ring and associated ring services. Required when the first position of the REQTYP field is R and the UNE field is not populated. Required for DS1/DS3 within a Fiber Network and the UNE field is not populated. Required for services riding a dedicated ring and the UNE field is not populated. Otherwise prohibited. In NY, FNI data maps to service order FID SNID. SNID requires a minimum of 5 and a maximum of 6 characters and is only retained in CABS. When the UNE field = Y in NY, the FNI field is not available at this time. Identifies the customers circuit identification code for the ring being requested. 11 character CLLI Identifies the primary service location when the terminating and the originating points are not the ACTL. When the PSLI field is populated with an A, the PSL indicates the VZ switch originating traffic. Required when the CC and UNE are populated and ACTL is not populated, otherwise optional. Required for EDTP Type 2 *. * where available Identifies the use of the PSL field. Required when the PSL field is populated, otherwise prohibited.

42.

FNI

Fiber Network Identification

13

A/N

Conditional

43. 44.

CFNI PSL

Customer Fiber Network ID Primary Service Location

20 11

A/N A/N

Optional Conditional

45.

PSLI

Primary Service Location Indicator

Conditional

A = Provider Switch B = Provider Central Office C = Customer Physical Collocation D = Customer Virtual Collocation E = Provider Assigned CLLI Code

46.

CKR

Customer Circuit Reference

53

A/N

Optional

Identifies the circuit number or range of circuit numbers used by the customer.

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-11

3.2 ASR - Access Service Request


Field UNIT Data Description Unit Identification Length 1 Type A Usage Conditional Valid Entries C = Number of lines, trunks, facilities, circuits, CCS links or ring segments B = Number of BHMC P = Percent market share

Verizon ASR Business Rules v 27


Notes And Conditions Identifies whether the Quantity (QTY) field contains number of circuits, ring segments, Busy Hour Minutes of Capacity (BHMC) for switched access services or percent of market share. Required when the first position of the REQTYP field is M, the ACT field is N, C, D and the second position of the TQ field is not N or X and the EOD USE field on EOD Form is not A. Required when the first position of the REQTYP field is A or L and the ACT field is N, C or D. Prohibited when the second position of the TQ field is N or X or the EOD USE field on EOD Form = A. Otherwise optional. When UNE field = Y, entry of C is required. Identifies the expected Interstate Usage for the access service on this request. Both Interstate and Intrastate may be ordered on a single Access Service Request by specifying the applicable percent of Interstate usage. However, two Access Service Requests may be related to one another through entry RPON (Related Purchase Order Number). Required for services other than FGC and FGD when the ACT field is N, the WST field is not populated. Required when the first position of the REQTYP field is S, E, V, X or W and the ACT field is C, M, T or R. Prohibited when the first position of the REQTYP field is Q. Otherwise optional. When UNE field = Y and ACT = N, C, M, T, or R PIU entry of 000 is required, except in the DC LATA where the PIU must = 100. Identifies the percent of local usage associated with trunk groups carrying local traffic between a LEC and a CLEC. Required when the CC field is populated and the first position of the REQTYP field is M. Optional when CC field is populated and the first position of the REQTYP field is S or L. Otherwise prohibited. Identifies the switched access local transport elements affected by this request. Required when the first position of the REQTYP field is M or A and the ACT field is N, C or D. Required for switched access facilities when the ACT field is N, C or D. Optional when the first position of the REQTYP field is L and the ACT field is N, C or D. Otherwise prohibited. When UNE field = Y and 1st position REQTYP = M, LTP entry must be N. When UNE field = Y and REQTYP first position = L or S, LTP is prohibited.

47.

48.

PIU

Percentage of Interstate Usage

A/N

Conditional

000 or 100 (see Notes)

49.

PLU

Percent Local Usage

A/N

Conditional

001 to 100 LOF

50

LTP

Local Transport

A/N

Conditional

1st position N see notes

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-12

3.2 ASR - Access Service Request


Field ECCKT Data Description Exchange Company Circuit ID Length 53 Type A/N Usage Conditional Valid Entries COMMON LANGUAGE Special Service Circuit Codes (CLCI S/S Codes) Telephone Number Format COMMON LANGUAGE Special Service Circuit Codes (CLCI S/S Codes) COMMON LANGUAGE Message Trunk Circuit Codes (CLCI MSG Codes) COMMON LANGUAGE Facility Codes (CLFI Codes)

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the provider circuit ID or multiple circuit Ids. The provider assigning this circuit identifier determines the content of this field in accordance with COMMON LANGUAGE standards maintained by Telcordia Technologies. When a component within the format is purposely omitted, the component should still be delimited and compressed to eliminate any spaces. All components within the ECCKT should be delimited by either virgules or periods. If all positions in a component within the ECCKT are not populated, the component should be compressed to eliminate any spaces. When disconnecting all circuits in a given account, ALL should be entered in this field, the BAN field populated, and the ACT field should contain a D. The format and structure of the field is defined by ANSI standards. Required when the ACT field is C, D, M or T and the first position of the TQ field is not S. Required when the ACT field is N and the first position of the TQ field is not S, the CCVN field is populated Required when the ACT field is N or R, the first position of the TQ field is S, an ECCKT has not been previously provided to the customer Otherwise optional. Identifies the quantity of circuits, ring segments, BHMCs, or the percent of market share, involved in this service request. Required when the ACT field is N, C, D, M or T, the second position of the TQ field is not N or X, the EOD USE on EOD Form is not A Prohibited when the second position of the TQ field is N or X. Prohibited when the EOD USE on the EOD Form is A Otherwise optional. When UNE field = Y and 1st position REQTYP = M and ACT = N or C, QTY entry is required and must reflect a number of DS0 trunks. When UNE field = Y and 1st position REQTYP = S and AFO first position =Y, QTY entry is required and must equal total ACI records plus 1. Identifies the billing account to which the recurring and non-recurring charges for this request will be billed. E or NB is prohibited when UNE field = Y. Identifies the access service group assigned to a particular circuit or group of circuits. This number appears on the Customer Service Record (the billing service charge details) which was forwarded to the customer when the service was installed, or, when there was a change to the bill resulting from service order activity. The ASG may also be provided on the Confirmation Notice Form (CN) by the provider. If a new ASG is being requested then the only valid entry is N.

51.

52.

QTY

Quantity

Conditional

53.

BAN

Billing Account Number

12

A/N

Required

Valid UNE BAN N = New Billing Account Number requested E = Existing NB = Multi-EC Nonbilling provider

54.

ASG

Access Service Group

A/N

Optional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-13

3.2 ASR - Access Service Request


Field 55. BIC Data Description Exchange Company Initiated Change Length 1 Type N Usage Conditional Valid Entries 1 = Trunk Group Service Request (TGSR) 2 = Engineering Change 3 = ICSC Record Change 4 = Facility Transfer 5 = Network Reconfiguration 6 = Maintenance Consideration 7 = Other

Verizon ASR Business Rules v 27


Notes And Conditions Indicates the type of provider initiated change requested. BIC entries are provided to the customer by the provider. This field is valid on an ASR Form that responds to a provider initiated change. Prohibited when the ACT field is M, otherwise optional.

56.

BIC TEL

BIC Telephone Number

10

Conditional

Identifies the telephone number of the provider representative responsible for the BIC. Required when the BIC ID field is populated, otherwise prohibited. Identifies the provider contact, work group or a serial type log, etc., associated with the BIC. Required when the BIC field is populated, otherwise prohibited. Identifies a code assigned to a trunk group or a CCS Link Set. The code set is unique to each established trunk group or CCS Link Set and is provided to the customer on the Firm Order Confirmation or Design and Order Confirmation. The TSC entry may then be populated by the customer when ordering changes, additions or deletions to an existing trunk group or CCS Link Set. Required when the LA field is Y for established trunk side service or CCS Link Set. Optional when the LA field is not populated for established trunk side service or CCS Link Set. Otherwise prohibited. Required when adding capacity to an existing trunk group using UNE dedicated trunk port(s). Identifies the telephone number used for billing or translation purposes. Prohibited when the UNE field is populated.

57.

BIC ID

BIC Identifier

12

A/N

Conditional

58.

TSC

Two Six Code

A/N

Conditional

59.

WSTN

Wireless Screening Telephone Number

10

A/N

Conditional

Telephone Number format NPA-NXX-XXXX

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-14

3.2 ASR - Access Service Request


Field ACTL Data Description Length Access Customer Terminal 11 Location Type A/N Usage Conditional Valid Entries Valid CLLI code

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the CLLI code of the customer facility terminal location. The CLLI code will have been previously assigned. Prohibited when the first position of the REQTYP field is E or X. Prohibited when the PRILOC field on RING Form is populated. Prohibited when PSLI field is A. Optional when the second position of the TQ field is N. X. Optional when the first position of the REQTYP field is W and the BAN field is not N. Otherwise required. When UNE field = Y and the 1st position REQTYP = L, the 11 character CLLI must represent a central office collocation arrangement*. When UNE field = Y and the 1st position REQTYP = M, the 11 character CLLI must represent a central office collocation arrangement*, except when ordering EDTP**. When UNE field = Y, the 1st position REQTYP = S and the NC on the Transport Form indicates multiplexing, the 11 character CLLI must represent a central office collocation arrangement*, except when ordering EEL or EDTP** transport. In DC, DE, MD, ME, NH, NJ, NY, PA, RI, VA, WV & VT, when UNE field = Y, the 1st position REQTYP = S and the NC on the Transport Form indicates Dark Fiber, the 11 character CLLI must represent a central office collocation arrangement*. In MA, when UNE field = Y, the 1st position REQTYP = S and the NC on the Transport Form indicates Dark Fiber and the dark fiber terminates in a VZ central office, the 11 character CLLI must represent a central office collocation arrangement*. When ordering DS1, DS3, OC3 or OC12 Loops not combined with EEL transport, and UNE field = Y, the 11 character CLLI must represent a central office collocation arrangement*. When the UNE field = Y and ordering UFSE, the 11 character CLLI must represent a central office collocation arrangement. * In MA, ME, NH, NY, RI & VT, central office collocation arrangement 11 character CLLI must have a H in the 9th character position. In DC, DE, MD, NJ, PA, & WV, central office collocation arrangement 11 character CLLI must have a H in the 9th character position and a C, G, P, R or V in the 10th character position. In former Bell Atlantic region of VA, central office collocation arrangement 11 character CLLI must have a H in the 9th character position and a C, G, P, R or V in the 10th character position. ** where available

60

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-15

3.2 ASR - Access Service Request


Field 61. PBT Data Description Pot Bay Type Length 1 Type A Usage Conditional Valid Entries A = Pot bay is located in the common area ILEC provides, installs and maintains equipment. B = Pot bay is located in the common area Collocator provides equipment and ILEC installs and maintains equipment. C = Pot Bay is located inside the cage CLEC provides, installs and maintains equipment. C = CLLI code N = Narrative Valid CLLI code

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the type of collocation arrangement for this service request. A Pot Bay is the physical demarcation point between a physical collocation arrangement and the ILECs equipment. Optional when the first position of the REQTYP field is M or S and the ACT field is N, C or D, otherwise prohibited.

62. 63.

AI APOT

Additional Point of Termination Indicator Additional Point of Termination

1 11

A A/N

Conditional Conditional

Identifies whether the FEOD field contains a CLLI code or a narrative. Required when the APOT field is populated, otherwise prohibited. Further identifies the physical ACTL Point of Termination. Required when the ACTL field does not identify the specific physical termination point of the access service. Otherwise optional. Identifies a providers related order number. Required when the provider has pre-assigned a related order number, otherwise prohibited. Identifies the PON of a related Access Service Request. The RPON field may be used for relating both N and D Access Service Requests that change a location (different premises) of an existing service. The RPON field may be used to relate intrastate and interstate requests for a mixed group such as for Feature Group A service when ordered using separate Access Service Requests or relating requests with firm orders. When the CCVN field is populated, the RPON field for the disconnect ASR must contain the new connect ASR PON. The RPON field of the new connect ASR may contain the disconnect ASR PON. When the TQ field is A, the RPON field will contain the PON of the ASR which has the TQ attached (Master ASR). See ATIS/OBF-ASR-019, General Section. This rule takes precedence over any other RPON value. Required when the ACT field is D and the CCVN field is populated. Required when the NOR field is populated. Required when the first position of the TQ field is A. Required when the ATN field on the Transport or EUSA Form is N. Required when the REL TSC field on the Trunking Form is N. Otherwise optional. Identifies the request as being a coordinated conversion reusing a portion of an existing access service configuration for the provisioning of a new access service. Two access service requests (one new connect and one disconnect) are required. When this field is populated on an ASR with N activity, the ECCKT field must be populated with the circuit identification(s) of the former customers access service. When a Coordinated Conversion is applicable, it is strongly recommended that both requests (N and D) are fully cross- referenced using CCVN, PON and RPON fields which will allow for a more efficient transition of the services. Optional when the ACT field is N or D, otherwise prohibited.

64.

RORD

Related Order Number

17

A/N

Conditional

65.

RPON

Related Purchase Order Number

16

A/N

Conditional

66.

CCVN

Coordinated Conversion

Conditional

IAC Code(s)

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-16

3.2 ASR - Access Service Request


Field ASCEC Data Description Access Service Coordination Exchange Company Length 4 Type A/N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions This field identifies the ICSC code of the Access Service Coordination - Exchange Company (ASC-EC) whenever an access service passes through more than one provider territory. Required when multiple providers are involved in providing access service, otherwise prohibited. Indicates the provisioning and restoration priority as defined under the TSP Service Vendor Handbook. These codes are assigned by the TSP Program Office. A TSP code ending in 00 indicates revocation, the removal of a previously assigned TSP code. Identifies a number equivalent to the End User Purchase Order Number. This may, at the option of the customer, be a requirement when providing service to some governmental agencies. This field may be used in conjunction with the SBILLNM field. Identifies that this service is provided to an agency of the Federal Government. Identifies a specific product or service offering. SPEC may be applicable for circuit level features and options other than those already identified by the Network Channel (NC) and Network Channel Interface (NCI) codes. Required when UNE field = Y and first position of the REQTYP field entry is L, M or S. UNE SPECs and configurations are: UNBALL = UNE DS1, DS3, OC3 and OC12 Loops (non-EEL), UNE IOF, UNE Dark Fiber, UNE Mux and DTS UNB1OT = All Expanded Extended Loop (EEL) Products (EEL Backbone, EEL Loops (DS1 and DS3) and EEL M-Loops (Voice Grade, DS0, and DS1) UNB1DP = Extended Dedicated Trunk Port (EDTP) Type 1* UNB1D2 = Extended Dedicated Trunk Port (EDTP) Type 2* UNBFSE = Unbundled Feeder Sub-loop Element * where available Identifies a free flowing field which can be used to expand upon and clarify other data on this form. Required when the ACT field is N and the request is for IOF Dark Fiber or Loop Dark Fiber. Required when SUP field = 3 or 4. Otherwise optional. Identifies the name of the person, office, or company to whom the customer has designated that the bill be sent. Required when the BAN field is N. Required when the CCNA field is CUS. Required when the ACNA field is ZZZ. Otherwise optional.

67.

68.

TSP

Telecommunication Service Priority

12

A/N

Optional

Nine Char TSP Control Identifier. One Character Provisional Priority Level (E, 0-5) One Digit Restoration Priority Level (0-5)

69.

SAN

Subscriber Authorization Number Agency of the Federal Government Service and Product Enhancement Code

30

A/N

Optional

70 71.

AFG SPEC

1 5-7

A A/N

Optional Conditional

Y = Yes Positions 1-7 = any alpha character except I or any numeric character except 0 When ordering UNEs: UNBALL UNB1OT UNB1DP UNB1D2 UNBFSE see Notes

72.

REMARKS

Remarks

186

A/N

Conditional

73.

BILLNM

Billing Name

25

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-17

3.2 ASR - Access Service Request


Field SBILLNM Data Description Secondary Billing Name Length 25 Type A/N Usage Optional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the name of a department or group within the designated BILLNM entry. May also be used to specify the end user customer as identified in field entry SAN, subscriber Authorization Number used by the customer in conjunction with billing its customers. Identifies the COMMON LANGUAGE IAC code of the customer who should receive the bill for the ordered service. When UNE field = Y, ZZZ is prohibited. Indicates that the customer has submitted a tax exemption form to the provider. Required when the ACT field is N and the BAN field is N, otherwise optional.

74.

75.

ACNA

Access Customer Name Abbreviation Tax Exemption

Required

IAC Code ZZZ = Casual customer or end user billing Entry F S C M A B K D E G H I J L N P Exempt from Federal State/Province County or Local Municipal F&S F&C F&M F&S&C F&S&M F&S&C&M S&C S&M C&M Letter on File Non Exempt S&C&M

76.

TE

Conditional

77.

EBP

Extended Billing Plan

A/N

Conditional

Identifies the request for establishing or removing installment billing of nonrecurring charges that may be offered by a provider. Prohibited when the UNE field is Y, otherwise optional. Identifies the street of the billing address associated with the billing name. Required when the BAN field is N, otherwise optional. Identifies the floor for the billing address with the billing name. Identifies the room for the billing address associated with the billing name. Identifies the city, village, township, etc. of the billing address associated with the billing name. Required when the BAN field is N, otherwise optional. Identifies the two character postal code for the state/province of the billing address associated with the billing name. Required when the BAN field is N, otherwise optional. Identifies the zip code or postal code of the billing address associated with the billing name. Required when the BAN field is N, otherwise optional. Identifies the name of the person or office to be contacted on billing matters. Required when the BAN field is N, otherwise optional.

78. 79. 80. 81.

STREET FLOOR ROOM CITY

Street Address (BILL) Floor (BILL) Room (BILL) City (Bill)

25 3 6 25

A/N A/N A/N A/N

Conditional Optional Optional Conditional

82.

STATE

State/Province (BILL)

Conditional

83.

ZIP CODE

Zip Code (BILL)

12

A/N

Conditional

84.

BILLCON

Billing Contact

15

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-18

3.2 ASR - Access Service Request


Field TEL NO VTA Data Description Telephone Number (BILL) Variable Term Agreement Length 15 17 Type N A/N Usage Conditional Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the telephone number of the billing contact. Required when the BAN field is N, otherwise optional. Identifies the duration, identifying USOC, contract date or contract identification number of any variable term agreement that may be offered by a provider. When UNE field = Y, VTA is prohibited, otherwise optional. Identifies the duration, identifying USOC, contract date of contract identification number of any variable term agreement that may be offered by a provider for a virtual connection. Optional, when the first position of the REQTYP field on the ASR Form is a V or X, and the VCVTA field on the VC Form is not populated; otherwise prohibited.

85. 86.

87.

VCVTA

Virtual Connection Variable Term Agreement

17

A/N

Conditional

88.

IWBAN

Inside Wire Billing Account Number

16

A/N

Conditional

When UNE field = Y, VCVTA is prohibited. Identifies the previously assigned Billing Account Number for charges associated with inside wire. Required when GETO on service specific form = A, E, S, T, U, V, W, Y or Z, otherwise optional.

89

INIT

Initiator

15

A/N

Required

90 91 92 93 94 95 96 97 98 99

TEL NO INIT FAX NO INIT EMAIL STREET FLOOR ROOM CITY STATE ZIP CODE DSGCON

Telephone Number (INIT) Initiator Facsimile Number Initiator Electronic Mail Address Initiator Address Street Floor (INIT) Room (INIT) City (INIT) State (INIT) Zip Code (INIT) Design/ Engineering Contact

15 10 60 25 3 6 25 2 12 15

N N A/N A/N A/N A/N A/N A A/N A/N

Required Optional Optional Required Optional Optional Required Required Required Conditional

When UNE field = Y, IWBAN is prohibited. Identifies the customer employee who originated this request. This is the person who should be contacted if there are any questions regarding this request. Any authorizations of charges, changes or waiving the Confirming Design Layout Report (CDLR) are the responsibility of this person. Identifies the telephone number of the customer employee who initiated this request. Identifies the fax number of the initiator. Identifies the electronic mail address of the initiator. If INIT EMAIL is provided, Verizon will initiate an email notification(s) to advise that a C/NR Form has been sent to the customer. Identifies the initiators street address. Identifies the floor of the initiators address. Identifies the room of the initiators address. Identifies the city, village, township, etc. of the initiators address. Identifies the two character postal code for the state/province of the initiators address. Identifies the zip code or postal code of the initiators address. Identifies the employee of the customer or agent that should be contacted on design/engineering matters and to whom the Design Layout Report will be sent. Required when the ACT field is N, C, M or T Prohibited when the first position of the REQTYP field is Q. Otherwise optional. Identifies the telephone number of the customer employee, office, or agent that should be contacted on design/engineering matters. Required when the DSGCON field is populated, otherwise optional.

100

TEL NO

Telephone Number (DSGCON)

15

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-19

3.2 ASR - Access Service Request


Field DSG FAX NO Data Description Design Facsimile Number Length 10 Type N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the fax number of the design contact. Required when the ACT field is N, C, M or T, the DRC field is not populated, the RTR field is S or 1-10, the first position of the REQTYP field is not Q and the STREET (DSGCON) field is not populated, otherwise optional. Identifies the electronic mail address of the design contact. Identifies the street for the design/engineering contact. Required when the ACT field is N, C, M or T, the DRC field is not populated, the RTR field is S or 1-10

101

102 103

DSG EMAIL STREET

Design Electronic Mail Address Street Address (DSGCON)

60 25

A/N A/N

Optional Conditional

104

DRC

Design Routing Code

A/N

Conditional

Otherwise optional. Identifies the customer location routing code for the design contact for this request. The routing code represents the following information: Company, Street, Floor, Room, City, Sate/Province, Zip Code. Required when the ACT field is N, C, M or T, the first position of the REQTYP field is not Q, the RTR field is S or 1-10 and design contact address information is not provided. Prohibited when the first position of the RTR field is D or F. Otherwise optional. Identifies the customer location routing code for the design contact for the facility in a combined ASR situation. The routing code represents the following information: Company, Street, Floor, Room, City, Sate/Province, Zip Code. Required when the ACT field is N, C, M or T, the RTR field is S or 110, the design contact address information is not provided and the FDRC is different from the DRC, otherwise prohibited. Identifies the floor of the design/engineering contacts address. . Identifies the room associated with the design/engineering contacts address. . Identifies the city, village, township, etc. of the design/engineering contacts address. Required when the ACT field is N, C, M or T, the DRC field not populated, the RTR field is S or 1-10, and the first position of the REQTYP field is not Q.

105

FDRC

Facility Design Routing Code

A/N

Conditional

106 107 108

FLOOR ROOM CITY

Floor (DSGCON) Room (DSGCON) City (DSGCON)

3 6 25

A/N A/N A

Conditional Conditional Conditional

109

STATE

State/Province (DSGCON)

Conditional

Otherwise optional. Identifies the two character postal code for the state/province of the design/engineering contacts location. Required when the ACT field is N, C, M or T, the DRC field not populated and the RTR field is S or 1-10 Prohibited when the first position of the REQTYP field is Q. Otherwise optional.

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-20

3.2 ASR - Access Service Request


Field ZIP CODE Data Description Zip Code (DSGCON) Length 12 Type A/N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the zip code or postal code of the design/engineering contacts address. Required when the ACT field is N, C, M or T, the DRC field not populated and the RTR field is S or 1-10 Prohibited when the first position of the REQTYP field is Q. Otherwise optional. Identifies the customer employee or office responsible for maintenance subsequent to the installation of the access service. Prohibited when the Implementation Contact and the Maintenance Contact are the same, otherwise optional Identifies the customer employee or office responsible for control of installation and completion. This is the contact to be used for completions, acceptance testing and other such related installation activity. Required when the ACT field is N, C, D, M or T. Required when the ACT field is R and the TQ field is populated. Otherwise optional. Identifies the telephone number of the implementation contact. Required when the IMPCON field is populated, otherwise prohibited. Identifies the date and time that the provider received the Access Service Request. This field will be generated automatically on requests received from the customer utilizing mechanized order entry. Field will be populated by Verizon Identifies the telephone number of the maintenance contact. Required when the MTCE field is populated, otherwise prohibited.

110

111

MTCE

Maintenance Contact

11

A/N

Conditional

112

IMPCON

Implementation Contact

15

A/N

Conditional

113 114

TEL NO D/TREC

Telephone Number (IMPCON) Date and Time Received

15 17

N A/N

Conditional Required

115

TEL NO

Telephone Number (MTCE)

10

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-21

3.3 Trunking Form

Verizon ASR Business Rules v 27

3.3 Trunking Form


Required when 1st position of the REQTYP field on the ASR Form is M or L.

Trunking Form - Specific Data


1. 2. 3. 4. Field CCNA PON VER ASR NO Data Description Customer Carrier Name Abbreviation Purchase Order Number Version Identification Access Service Request Number Length 3 16 2 18 Type A A/N A/N A/N Usage Required Required Conditional Conditional Valid Entries IAC Code CUS = Casual customer Notes And Conditions Identifies the COMMON LANGUAGE IAC code for the customer submitting the ASR and receiving the Confirmation Notice Form (CN). Identifies the customers unique purchase-order or requisition number that authorizes the issuance of this request or supplement. This PON field entry must be identical to the PON field entry on the ASR Form. Identifies the customers version number. This entry must be identical to the VER field entry on the ASR Form. Required when the VER field on the ASR Form is populated, otherwise prohibited. Identifies the number that may be generated by the provider mechanized systems, pre-assigned to the customer by the provider, or manually assigned by the provider to identify a customers request for service. This entry must be identical to the ASR NO field entry on the ASR Form. Required when the ASR NO is pre assigned to the customer Required on all supplements when PON is not unique. Otherwise Identifies the network channel code for the circuit(s) involved. The NC code describes the channel provided by the provider from the customers ACTL/Primary Location to the provider central office switch. Required when the ACT field on the ASR Form is N or C, otherwise optional. Identifies the electrical conditions on the circuit at the ACTL/Primary Location. Positions 11 and 12 must be blank or populated with a dash (-) when the PSLI field on the ASR Form is A. 12 A/N Conditional Required when the ACT field on the ASR Form is N or C, otherwise optional. Identifies the required transmission level when a non-standard interface is required at the ACTL. Positions 1-6 required when the ACT field on the ASR Form is N or C and position 8 or 11 of the NCI field is I. Positions 1-6 optional when the ACT field on the ASR Form is D, M or R and position 8 or 11 of the NCI field is I. Positions 7-12 required when the ACT field on the ASR Form is N or C and position 9 or 12 of the NCI field is I. Positions 7-12 optional when the ACT field on the ASR Form is D, M or R and position 9 or 12 of the NCI field is I. Otherwise prohibited. When ordering UNEs, the UNE field on the ASR Form = Y and the PSLI field on the ASR Form is populated with an A, TLV is prohibited.

5.

NC

Network Channel Code

A/N

Conditional

NC Code

6.

NCI

Network Channel Interface Code

12

A/N

Conditional

NCI Code

7.

TLV

Transmission Level

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-22

3.3 Trunking Form


Field TTT Data Description Transport Trunk Termination Code Length 1 Type A/N Usage Conditional Valid Entries Trunk Type Standard Originating Standard Terminating Standard 2-way Operator coin only Operator non-coin Operator combined coin & non-coin Operator full feature Tandem Signaling Trunk for Originating 9 = Standard Land to Mobile A = Standard Mobile to Land U.S. Standard Metric Format Code 1 = 2 = 3 = 4 = 5 = 6 = 7 = 8 =

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the type of trunk termination requested. Required when the first position of the REQTYP field on the ASR Form is M, the ACTI field is C l Prohibited for FGB services whe the NC code specifies rotary dial station signaling transport termination. Optional when the first position of the REQTYP field is M and the ACTI field is C.

8.

9. 10. 11. 12.

DDLRD DFOC MLT IMTA

Desired Design Layout Report Date Desired Firm Order Confirmation Mobile To Land Traffic Percent Inter-Major Trading Area

10 10 3 3

N N N N

Optional Optional Conditional Conditional

Identifies the date by which the Design Layout Report is requested to be forwarded to the customer. Identifies the date by which the customer requests the FOC or DOC to be forwarded. Identifies the percentage of local traffic that is routed mobile to land. Optional when the WST field on the ASR Form is populated, otherwise prohibited Identifies the percentage of Inter MTA calls. Optional when the WST on the ASR Form and the CC field on the ASR Form is populated, otherwise prohibited. Identifies the total number of ACI circuit detail sections sent by the customer when ordering Switched Services utilizing High Capacity facilities. Required when the first position of the REQTYP field on the ASR Form is M and the first position of the AFO field on the ASR Form is Y, otherwise prohibited.

13.

QACI

Quantity Additional Circuit Information

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-23

3.3 Trunking Form


Field TRFTYP Data Description Traffic Type Length 5 Type A/N Usage Conditional Valid Entries AL = Transiting and Local/IntraLATA Toll (LT and LS) AM = Transiting and Local/IntraLATA Toll /Inter-tandem AT = IntraLATA Toll AX = Audio Text (976) Information CH = Choke C0 = Coin Zero Plus C1 = Coin One Plus DA = Directory Assistance DC = Directory Assistance Call Completion Service DD = Domestic Carrying traffic E9 = E911/911 ID = International traffic IO = ISDN originating IR = Intercept Service IT = ISDN terminating LA = Local Transiting and Local /IntraLATA Toll LI = Local / IntraLATA Toll / InterLATA Toll LL = Local LS = Local Transiting LT = Local / IntraLATA Toll NA = National Operator Assistance ND = National Directory Assistance OP = Operator assistance OT = Originating traffic PN = Portable Numbering (DID-type for INP) PO = PSDS originating PT = PSDS terminating RI = Route Index (for INP) TM = Transiting/Inter-tandem TR = Telecomm Relay TS = Transiting TT = Terminating traffic VR = Busy Line Verify/Interrupt 50 = 500 traffic 80 = Toll free traffic (800, 888, 877, etc.) 90 = 900 traffic

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the type of capacity requested Required when the first position of the REQTYP field on the ASR Form is M and the ACT field on the ASR Form is N,and the ACTI field on the ASR Form is C. Optional. when the first position of the REQTYP field on the ASR Form is M and the ACT field on the ASR Form is N and the ACTI field on the ASR Form is B. Optional. when the first position of the REQTYP field on the ASR Form is M and the ACT field on the ASR Form is C. Otherwise Prohibited.

14.

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-24

3.3 Trunking Form


Field SECTLV Data Description Secondary Transmission Level Length 12 Type A/N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the required transmission level when a non-standard interface is required. This field should contain a one character plus or minus (+ or -), a two digit number, a decimal point, a one digit number and one character. Positions 1 through 6 are used to specify the transmission level to be received at the provider switch. Positions 7 through 12 are never used on this field and are reserved for future use. Transmission specifications may be described in provider tariffs and/or in technical reference publications. Optional when the ACT field on the ASR Form is N or C and the PSL field on the ASR Form is not populated, otherwise prohibited. Identifies the specification of the Expected Measured Loss (EML) This denotes a calculated loss which specifies the end-to-end 1004 Hz loss on a terminated test connection between two readily accessible manual or remote test points. It is the sum of the inserted connection loss and test access loss including any test pads (customers and/or provider) or Decode Level Points (DLP) and Encode Level Points (ELP) in a digital switch environment. The EML can be symmetrical or non-symmetrical configurations. Symmetrical configurations are specified using only the T portion of the field. Non-symmetrical configurations are specified by using both portions of the field. Negative values should be indicated with a minus sign. Positive values should be indicated with a plus sign. Transmission specifications may be described in provider tariffs and/or in technical reference publications. Optional when the ACT field on the ASR Form is N or C and the PSL field on the ASR Form is not populated, otherwise prohibited. Identifies the uniform Carrier Identification Code associated with the trunking request. Required for FGB and FGD requests when the ACTI field on the ASR Form is C. Prohibited on requests for FGC and CCS Links. Otherwise optional. Identifies a specific customer trunk number or trunk number range. Trunk number component in the message format is a variable length, one to four character numeric code and trunk numbers of fewer than 4 characters are left justified with remaining spaces not filled. Leading zeros are not to be used as part of the trunk number. However the trunk number zero is allowed.

15.

16.

EML

Expected Measured Loss

12

A/N

Conditional

17.

CIC

Carrier Identification Code

Conditional

Type Entry 950-XXXX = XXXX 10XXX = XXX 101XXXX = XXXX 0-9999

18.

TRN

Trunk Number

Conditional

19.

TCIC

Trunk Circuit Identification Code

11

Conditional

Optional when the first position of the REQTYP field on the ASR Form is M and the TCIC field is not populated, otherwise prohibited. A five numeric entry or range of five Identifies a specific trunk for which CCS is being performed. numeric entries. If the entry ends in 97, 98, The TCIC numeric characters are right justified with leading zeros. The ten thousand-digit should always be zero. 99 or 00, the NS field must be populated. Some switch types require provider/customer negotiation in assigning TCIC codes. Required on all requests for CCS trunks, otherwise prohibited.

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-25

3.3 Trunking Form


Field NS Data Description No Skip Length 1 Type A Usage Conditional Valid Entries Y = include TCIC entries ending in 97, 98, 99 or 00. Prefix E = C = Followed by County Name CLLI Code

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the customers requirement to include TCIC numbers ending in 97, 98, 99 or 00, for this request. Optional when the TCIC field is populated, otherwise prohibited. Identifies the Public Service Answering Point to be used in the event of an ANI failure. Required when ordering a new trunk group to an E911 tandem with ALI/ANI failure routing, otherwise optional. Identifies the provider related circuit ID to which traffic is to be routed or the facility being disconnected. When the facility associated with trunks is also being disconnected, this field should be populated with the facility identification. Required when disconnecting facilities and the ACT field on the ASR Form is D. Optional when the ACT field on the ASR Form is N or C and alternate routing is ordered or the SCRT field is populated. Otherwise prohibited. Required when UNE field on ASR Form = Y in DC, DE, MA, MD, ME, NH, NJ, NY, PA, RI, VA, VT & WV and ASR ACT = D and disconnecting unbundled dedicated trunk ports or extended dedicate trunk ports. Identifies a provider central office add drop multiplexer location used as a service access point when the ACTL/primary location is located off the ring network. Required when the ACTL is located off the ring and the ACT field on the ASR Form is N or C, otherwise prohibited. Prohibited when UNE field on ASR Form = Y in DC, DE, MA, MD, ME, NH, NJ, PA, RI, VA, VT & WV. When the UNE field = Y in NY, the PRIADM field is not available at this time. Identifies a provider central office add drop multiplexer location used as a service access point when the secondary location is located off the ring network. Required when the secondary location is located off the ring and the ACT field on the ASR Form is N or C, otherwise prohibited. Prohibited when the UNE field on the ASR Form is Y. Identifies the service prefix indicator and/or service access code based on how the customer wants its originating traffic directed. Optional for FGC requests when the ACT field on the ASR Form is N or C, otherwise prohibited. Prohibited when the UNE field on the ASR Form is Y. Identifies the serving area of the tandem office or end office for the trunking service being provided. Optional when the first position of the REQTYP field on the ASR Form is M and the ACT field on the ASR Form is N or C, otherwise prohibited. Prohibited when the UNE field on the ASR Form is Y.

20.

21.

PSAP

Public Service Answering Point

25

A/N

Conditional

22.

RECCKT

Related Exchange Company Circuit Identification

53

A/N

Conditional

23.

PRI ADM

Primary Add Drop Multiplexer

11

A/N

Conditional

24.

SEC ADM

Secondary Add Drop Multiplexer

11

A/N

Conditional

25.

SCRT

Service Class Routing

53

A/N

Conditional

26.

D.NPANXX

Desired NPA and NXX

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-26

3.3 Trunking Form


Field CFA Data Description Connecting Facility Assignment Length 42 Type A/N Usage Conditional Valid Entries NEW or valid CFA See Notes

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the provider carrier system and channel to be used from a Wideband Analog, High Capacity or Optical Network facility when the customer has assignment control. The Connecting Facility Assignment consists of 5 elements. 1. Facility Designation (1-5 characters) 2. Facility Type (1-6 characters) 3. Channel/Pair (1-5 characters) 4. Location A (8 or 11 characters) 5. Location Z (8 or 11 characters) On initial facility order (dedicated trunk port), an entry of NEW may be used. Virgules are used as delimiters to separate all elements of the CFA. All elements of the CFA are left justified with no trailing spaces. When multiple levels of CFA are being provided, the highest level of CFA is populated in the CFA field and the lower level of CFA is populated in the SCFA field. Required when utilizing Wideband or High Capacity or Optical Network facilities when the ACT field on the ASR Form is N or C and the first position of the LTP field on the ASR Form is N. Required when the first position of the LTP field on the ASR Form is C, E, F, L, Q or R and the ACT field on the ASR Form is N or C. Otherwise optional. A valid CFA is required when ordering trunks associated with spare, already in place, dedicated trunk port capacity. When UNE field on ASR Form = Y, ordering new dedicated trunk port or EDTP Type 1* with DS1 interface, entry of NEW is required. When UNE field on ASR Form = Y, ordering new EDTP Type 1* dedicated trunk port with DS3 interface, valid EDTP DS3 CFA required. * where available Identifies the CFA as a provider carrier system. Required when the CFA is a provider carrier system, otherwise prohibited. Identifies the Synchronous Transport Signal (STS), Virtual Tributary (VT) Group and VT Timeslot of the ring. Required when the ACT field on the ASR Form is N or C, the FNI field on the ASR Form is populated and the customer has assignment control, otherwise prohibited. Identifies the CLLI code of the provider central office which provides multiplexing for a service riding a High Capacity service. MUX is associated with the CFA which is one level above the service being ordered. Required when utilizing multiplexing services and the ACT field on the ASR Form is N, otherwise optional.

27.

28. 29.

CFAU CPT

CFA Use Channel Pair/Timeslot

1 11

A N

Conditional Conditional

Y = Provider carrier system

30.

MUXLOC

Multiplexing Location

11

A/N

Conditional

Valid CLLI representing VZ office.

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-27

3.3 Trunking Form


Field CSL Data Description Customer Switch Location Length 11 Type A/N Usage Conditional Valid Entries Valid 11 character CLLI RMKS = Use REMARKS

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the CLLI code or narrative description of the customers switch. Required for ordering CCS trunks when the ACT field on the ASR Form is N, otherwise optional. When the UNE field on ASR = Y and the SPEC field on ASR = UNB1D2, CSL CLLI must equal the CLLI in the PSL field on the ASR Form. Identifies the customers switch type. Required for ordering CCS trunks when the ACT field on the ASR Form is N, otherwise optional. Identifies the electronic address of the customers signaling point (SP) or signaling transfer point (STP) in a CCS network. When the UNE field on the ASR form = Y and the SPEC field on the ASR = UNB1D2, the CSPC identifies the VZ signaling point of the CLLI in PSL field on the ASR Form. Required when the first position of the REQTYP field on the ASR Form is L. Required for CCS trunk requests. Otherwise prohibited. Identifies the providers first point of switching for trunks or signaling point for CCS Links being provided. When the PSLI field on the ASR form is populated with an A, the PSL field on the ASR form identifies the providers first point of switching for trunks being provided and the SECLOC identifies the providers second point of switching for the trunks being provided. Required when the ACT field on the ASR Form is N, otherwise optional.

31.

32.

CST

Customer Switch Type

12

A/N

Conditional

33.

CSPC

Customer Signaling Point Code

11

Conditional

34.

SECLOC

Secondary Location

11

A/N

Conditional

End Office CLLI code Access Tandem CLLI code Signaling Point CLLI code Operator Services Tandem CLLI

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-28

3.3 Trunking Form


Field SCFA Data Description Secondary Connecting Facility Assignment Length 42 Type A/N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the provider carrier system and channel to be used from a Wideband Analog, High Capacity or Optical Network facility when the customer has assignment control. The Secondary Connecting Facility Identification consists of five elements. 1. Facility Designation (1-5 characters) 2. Facility Type (1-6 characters) 3. Channel/Pair (1-5 characters) 4. Location A (8 or 11 characters) 5. Location Z (8 or 11 characters) On initial facility order (extended dedicated trunk port), an entry of NEW may be used. Virgules are used as delimiters to separate all elements of the SCFA. All elements of the SCFA are left justified with no trailing spaces. When multiple levels of CFA are being provided, the highest level of CFA is populated in the CFA field and the lower level of CFA is populated in the SCFA field. When the UNE field on the ASR Form is populated, use of the SCFA field may be restricted to those companies that offer re-bundling. Optional when the CFA field is populated, otherwise prohibited. When UNE field on ASR Form = Y and SPEC=UNBALL in DC, DE, MA, MD, ME, NH, NJ, NY, RI, WV, VA & VT, SCFA is prohibited. When ordering EDTP Type 1* new dedicated trunk port(s) with DS3 interface, entry of NEW is required. * where available Identifies the billing account to which the recurring and non-recurring charges for the original High Capacity channel or unbundled element are billed. Required when the ACT field on the ASR Form is N, the first position of the LTP field on the ASR Form is B, D C, E, F, L, M, N, P, Q or R and this entry differs from the BAN field on the ASR Form, otherwise optional. When UNE field on ASR Form = Y, and ordering new dedicated trunk port(s), HBAN is required. Identifies the physical point of termination at a collocation arrangement. When ordering UNEs, new dedicated trunk port(s) with DS1 connection(s) to central office collocation arrangement, CCEA is required. Identifies the circuit number or range of circuit numbers used by the customer for the T1 Transport involved. Optional when the first position of the LTP field on the ASR Form is B, C, D, E, L, M, N, P, or Q and the ACT field on the ASR Form is N, C or D. Optional when ordering new UNE dedicated trunk port(s) and when populated will be associated to dedicated trunk port(s) on the CSR. Other wise prohibited

35.

36.

HBAN

High Capacity Channel Billing Account Number

12

A/N

Conditional

N or established UNE BAN E = Existing

37.

CCEA

Cross Connection Equipment Assignment Customer Circuit Reference (T1)

60

A/N

Conditional

38.

CKR1

40

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-29

3.3 Trunking Form


Field FACTL Data Description Facility Access Customer Terminal Location Length 11 Type A/N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the CLLI code of the customer facility terminal location for the DS1 facility being ordered. Required when the NC1 field is populated, otherwise prohibited. When ordering UNEs other than EDTP*, the CLLI must represent a central office collocation arrangement**. * where available ** In MA, ME, NH, NY, RI & VT, central office collocation arrangement 11 character CLLI must have a H in the 9th character position. In DC, DE, MD, NJ, PA, & WV, central office collocation arrangement 11 character CLLI must have a H in the 9th character position and a C, G, P, R or V in the 10th character position. In the former Bell Atlantic region of VA, central office collocation arrangement 11 character CLLI must have a H in the 9th character position and a C, G, P, R or V in the 10th character position. Identifies the network channel code for the T1 transport involved. The network channel code describes the channel provided by the provider from the customers ACTL to a provider end office or access tandem. Required when new T1 facilities or UNE transport are being ordered, the first position of the LTP field on the ASR Form is B, C, D, E, L, M, N, P or Q and the ACT field on the ASR Form is N. Optional when the first position of the LTP field on the ASR Form is B, C, D, E, L, M, N, P or Q and the ACT field on the ASR Form is C. Otherwise prohibited. When ordering UNEs, NC1 is required when the first position of the LTP = N and the ASR ACT field =N and the CFA or SCFA = NEW to identify the NC code for dedicated trunk port. Identifies the telephone number of the implementation contact for the T1 facility. Required when the NC1 Facility (T1) Implementation telephone number is not the same as the TEL NO (IMPCON) field on the ASR Form, otherwise optional. Identifies the date by which the switched access facility DLR is requested to be forwarded to the customer for the digital interfaces(s). Identifies the type of special routing requested. Prohibited when the ACT field on the ASR Form is M, otherwise optional. Identifies the requirement for a Make Busy Arrangement. Optional for FGB requests when the ACT field on the ASR Form is N or C. Optional for FGD requests when the ACT field on the ASR Form is N or C and the BSA field on the ASR Form is populated. Otherwise prohibited

39.

40.

NC1 (T1)

Network Channel Code (T1)

A/N

Conditional

NC Code

41.

FIMPTEL

Facility Implementation Telephone Number (T1) Desired Facility Design Layout Date Special Routing Code

15

Conditional

42. 43.

DFDLRD SR

10 1

N A

Optional Conditional A = Avoidance B = Avoidance and diversity C = Cable Only D = Diversity A = Install B = Install with recorded announcements C = Remove

44.

MBA

Make Busy Arrangement

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-30

3.3 Trunking Form


Field OPS Data Description Operator Services Length 1 Type A Usage Conditional Valid Entries A = O-transfer (without operator function) B = O-transfer (with operator function) C = Inward assistance D = Busy Line Verification/Call interrupt E=A&C F=B&C G=A&D H=B&D J = Toll & operator assist-local (not directory assistance) D = Bill Number Screening O = Other

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the operator assisted services that may be offered by some providers. Required when the ACT field on the ASR Form is N or C and operator services are being ordered, otherwise prohibited.

45.

46.

GETO

General Exchange Tariff Options Code

Conditional

Identifies the requirement for non-tariff or secondary tariff options in conjunction with the access service. Optional for FGB requests when on the ACT field on the ASR Form is N or C, otherwise prohibited. Indicates applicability of Carrier Common Line (CCL) charge for the entire billing account. Optional for FGB and FGD requests when the ACT field on the ASR Form is N, C or R, otherwise prohibited. Use of this field is based on provider tariffs/practices. Identifies the requirement to deliver the number dialed when number translations have occurred. Optional when the ACT field on the ASR Form is N or C and the BSA field on the ASR Form is populated, otherwise prohibited. Identifies the requirement to permit calls directed to an all trunk busy DID group to be held for delivery when a DID trunk becomes idle. Optional when the ACT field on the ASR Form is N or C and the BSA field on the ASR Form is populated, otherwise prohibited. Identifies a request for connection at a single tandem for terminating calls to a single providers tandems and subtending offices in multiple tandem LATAs. Optional when the provider has multiple tandems within the LATA, otherwise prohibited. Identifies the FGC trunk group to which overflow end office traffic will be routed or the CCS Link Set associated with the CCS trunk group. Required when FGC overflow is requested. Required for new CCS trunk groups when ACTI field on the ASR Form is C. Otherwise optional. Identifies the provider pending related service order requesting capacity for the other trunk group involved when alternate routing is requested. Optional when the first position of the REQTYP field on the ASR Form is M and the ACT field on the ASR Form is N or C, otherwise prohibited. Identifies a request to route 950 originating traffic over FGD trunk groups. Optional for FGD requests when the ACT field on the ASR Form is N or C, otherwise prohibited.

47.

WAC

Waive Carrier Common Line Charge

Conditional

Y = Waiver applies N = No waiver applies

48.

CDND

Called Directory Number Delivery

Conditional

Y = Install R = Remove

49.

DIDQ

DID Trunk Queuing

Conditional

Y = Install R = Remove

50.

STR

Single tandem Routing

Conditional

Y = Install R = Remove

51.

REL TSC

Related Two-Six Code

A/N

Conditional

N = New Valid TSC

52.

ALTRO

Related Alternate Order Number

17

A/N

Conditional

53.

FGD-950

FGD With 950 Access

Conditional

Y = Install R = Remove

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-31

3.3 Trunking Form


Field CHOK Data Description Choke Network Length 3 Type A/N Usage Conditional Valid Entries 1-999 = Quantity of trunks to be provided with this option R = Remove Numeric = 1-999 R = Remove A = Establish point code R = Remove point code A = Add point code use D = Delete point code use A = Access Link B = Bridge Link D = Diagonal Link E = Extension Link F = Fully associated Link

Verizon ASR Business Rules v 27


Notes And Conditions Indicates the number of trunks within a trunk group to be designated for 900 traffic. Optional for FGC and FGD requests when the ACT field on the ASR Form is N or C, otherwise prohibited. Indicates the period of time, in seconds, between calls to 900 service. Optional for FGD requests when the ACT field on the ASR Form is N or C, otherwise prohibited. Identifies the link set translations required for point codes in the Service Signaling Point Code (SSPC) field. Optional when the first position of the REQTYP field on the ASR Form is L and the ACT field on the ASR Form is N or C, otherwise prohibited. Identifies a particular CCS links functionality. Required when the first position of the REQTYP on the ASR Form is L, otherwise prohibited. Identifies the signaling link within the CCS link set. Required when the first position of the REQTYP field on the ASR Form is L, otherwise prohibited. Identifies the logical network address of the Signaling Transfer Point (STP). Optional when the PCACT field is populated and the ACT field on the ASR Form is C, otherwise prohibited. Identifies a code assigned to a group of signaling link(s) of a common channel signaling link set. Optional when the PCACT field is populated and the ACT field on the ASR Form is C, otherwise prohibited. Identifies a code assigned to a group of signaling link(s) of a common channel signaling link set. Optional when the TSC2 field is populated, otherwise prohibited. Identifies a code assigned to a group of signaling link(s) of a common channel signaling link set. Optional when the TSC3 field is populated, otherwise prohibited. Identifies the signaling point code(s) affected by the point code activity (PCACT). S = SSP T = STP C = SCP Required when the PCACT field is populated, otherwise prohibited. Identifies the type of signaling point related to the service signaling point code. Required when the SSPC field is populated, otherwise prohibited.

54.

55.

CGAP

Call Gapping Interval

A/N

Conditional

56.

PCACT

Point Code Activity Type

Conditional

57.

LT

Link Type

Conditional

58.

SLC

Signaling Link Code

Conditional

59.

APC

Alias Point Code

11

Conditional

60.

TSC2

Two Six Code 2

A/N

Conditional

61.

TSC3

Two Six Code 3

A/N

Conditional

62.

TSC4

Two Six Code 4

A/N

Conditional

63. 64.

SSPC SSPCTYPE

Service Signaling Point Code(s) Type of Signaling Point Code

11 1

N A

Conditional Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-32

3.3 Trunking Form


Field PCU Data Description Point Code Use Length 8 Type A/N Usage Conditional Valid Entries 1 = 800 Data base 2 = Call Set Up Inter Network 3 = LIDB 4 = ISDN 5 = CCO 6 = AIN/PCS 7 = CNAM 8 = Wireless TCAP 9 = Call Set Up Intra Network 10 = Other A = Calling Party Pays B = Number Portability C = CLASS D = ISVM E = Get Data F = Originating Line Number Screening (OLNS) I = Intermediate GTT Signaling Transfer Point G = Gateway Signaling Transfer Point S = Signaling Point (e.g., operator services switch)

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the type of traffic to be routed to the point codes in the Service Signaling Point Code (SSPC) field. When the field is populated with 10, specify requirements in the REMARKS field. Required when the SSPC field is populated, otherwise prohibited.

65.

66.

PC TYP

Point Code Type

Conditional

Identifies the usage of the network address point (point code) in the common channel signaling network. Optional when the PCACT field is populated and the ACT field on the ASR Form is C, otherwise prohibited. Identifies a specific software application in a common channel signaling network. Optional when the PCACT field is populated and the ACT field on the ASR Form is C, otherwise prohibited. Identifies the STP table used to perform global title translations. Optional when the PCACT field is populated and the ACT field on the ASR Form is C, otherwise prohibited. Identifies the CLLI Code associated with the Service Signaling Point Code (SSPC). Optional when the PCACT field is populated, otherwise prohibited. Identifies the COMMON LANGUAGE IAC code for the customer of the SSPC. Optional when the PCACT field is populated, otherwise prohibited. Identifies a free flowing field which can be used to expand upon and clarify other data on this form. When the 1st position REQTYP on the ASR Form = L, the SS7 Nodes CLLI is required when the CSL field is blank. Otherwise optional.

67.

SSN

Sub System Number

Conditional

68.

TTN

Translation Type Number

Conditional

69. 70. 71.

SSPC LOC PCNA REMARKS

Service Signaling Point Code Location Point Code Name Abbreviation Remarks

11 3 124

A/N A A/N

Conditional Conditional Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-33

3.4 Transport Form

Verizon ASR Business Rules v 27

3.4 Transport Form


Required when the 1st position of the REQTYP field on the ASR Form is S

Transport Form - Specific Data


1. 2. 3. Field CCNA PON VER Data Description Customer Carrier Name Abbreviation Purchase Order Number Version Identification Length 3 16 2 Type A A/N A/N Usage Required Required Conditional Valid Entries IAC Code CUS = Casual customer or end user billing Notes And Conditions Identifies the COMMON LANGUAGE IAC code for the customer submitting the ASR and receiving the Confirmation Notice Form (CN). Identifies the customers unique purchase-order or requisition number that authorizes the issuance of this request or supplement. This PON field entry must be identical to the PON field entry on the ASR Form. Identifies the customers version number. This entry must be identical to the VER field entry on the ASR Form. Required when the VER field on the ASR Form is populated, otherwise prohibited. Identifies the number that may be generated by the provider mechanized systems, pre-assigned to the customer by the provider, or manually assigned by the provider to identify a customers request for service. This entry must be identical to the ASR NO field entry on the ASR Form. Required when ASR NO is pre-assigned Required on all supplements when PON is not unique. Otherwise optional. Identifies the network channel code for the circuit(s) involved. The network channel code describes the channel provided by the provider. Required when the ACT field on the ASR Form is N, C, T, otherwise optional. 6. NCI Network Channel Interface Code 12 A/N Conditional NCI Code When UNE field on the ASR Form = Y, NC may not indicate bridging. Identifies the electrical conditions on the circuit at the ACTL/Primary Location. Required when the ACT field on the ASR Form is N, C or T, otherwise optional.

4.

ASR NO

Access Service Request Number

18

A/N

Conditional

5.

NC

Network Channel Code

A/N

Conditional

NC Code

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-34

3.4 Transport Form


Field 7. TLV Data Description Transmission Level Length Type Usage 12 A/N Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the required transmission level when a non-standard interface is required at the ACTL. This field should contain a one character plus or minus (+ or -), a two digit number, a decimal point, a one digit number, a one digit plus or minus, a two digit number, a decimal point, and a one digit number. Positions 1-6 are used when an I has been entered in position 8 or 11 of the NCI field and represents the transmission level to be received by the customer at the ACTL interface from the provider. Positions 7-12 are used when an I has been entered in position 9 or 12 of the NCI field and represents the transmission level to be transmitted from the ACTL interface to the provider. Positions 1-6 are required when the ACT field on the ASR Form is N, C or T and position 8 or 11 of the NCI field is I. Positions 1-6 are optional when the ACT field on the ASR Form is D, M or R and position 8 or 11 of the NCI field is I. Positions 7-12 are required when the ACT field on the ASR Form is N, C or T and position 9 or 12 of the NCI field is I. Positions 7-12 are optional when the ACT field on the ASR Form is D, M or R and position 9 or 12 of the NCI field is I. Otherwise prohibited. Identifies the electrical conditions on the circuit at the secondary ACTL or end user location. Required for two point service when the ACT field on the ASR Form is N, C or T. Optional for Hi-Cap facilities when multplexing is provided. Prohibited for multipoint services. Otherwise optional.

8.

SECNCI

Secondary Network Channel Interface Code

12

A/N

Conditional

NCI Code

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-35

3.4 Transport Form


Field SECTLV Data Description Secondary Transmission Level Length Type Usage 12 A/N Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the required transmission level when a non-standard interface is required. This field should contain a one character plus or minus (+ or -), a two digit number, a decimal point, a one digit number, a one digit plus or minus, a two digit number, a decimal point, and a one digit number. Positions 1-6 are used when an I has been entered in Position 8 or 11 of the SECNCI field and represent the transmission level to be received at the end user or secondary ACTL interface from the provider. Positions 7-12 are used when an I has been entered in position 9 or 12 of the SECNCI field and represents the transmission level to be transmitted from the secondary ACTL or end user interface to the provider. Transmission specifications may be described in provider tariffs/contracts and/or in technical reference publications. Positions 1-6 are required when the ACT field on the ASR Form is N, C or T and position 8 or 11 of the SECNCI field is I. Positions 1-6 are optional when the ACT field on the ASR Form is D, M or R and position 8 or 11 of the SECNCI field is I. Positions 7-12 are required when the ACT field on the ASR Form is N, C or T and position 9 or 12 of the SECNCI field is I. Positions 7-12 are optional when the ACT field on the ASR Form is D, M or R and position 9 or 12 of the SECNCI field is I. Otherwise prohibited. Indicates non-simultaneous transmission of signal and supervisory tones between the frequencies of 300 and 3000 Hz is required. Optional for Wideband Digital type 2 service when the ACT field on the ASR Form is N, C, T or R and the UNE field on the ASR Form is not populated, otherwise prohibited.

9.

10.

NSIM

Non-simultaneous Transmission of Signal and Supervisory Tones Requirements

Conditional

Y = Requested R = Remove

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-36

3.4 Transport Form


Field 11. SR Data Description Special Routing Code Length Type Usage 3 A/N Conditional Valid Entries 1st character -Primary location A = Cable only B = Diversity C = Disaster Recovery D = Route other than normal E = Self Healing Loop F = Alternate Wire Center G = Self Healing Loop via Alternate Wire Center H = Self Healing Wire Center K = Special Routing at POP/PRILOC N = N/A 2nd character-Interoffice Facility 1 = Avoidance 2 = Diversity 3 = Avoidance and Diversity 4 = Self Healing Interoffice Facilities 5 = Special Routing for Interoffice Facilities 6 = Route other than normal N = N/A 3rd character-Secondary Location A = Cable only B = Diversity C = Disaster Recovery D = Route other than normal E = Self Healing Loop F = Alternate Wire Center G = Self Healing Loop via Alternate Wire Center H = Self Healing Wire Center J = Self Healing Alternate Wire Center K = Special Routing at SECLOC N = N/A A = The customer certifies that the access service is terminated in a device not capable of interconnecting the service with local exchange service B = The customer has a blanket exemption certification on file with the provider C = is applicable to all circuits NA = Not applicable

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the type of special routing requested. Prohibited when the ACT field on the ASR Form is M, otherwise optional.

12.

S25

Surcharge Status

A/N

Conditional

Identifies whether a surcharge is applicable (non-exempt) or non-applicable (exempt) for the number of voice grade circuits ordered between two customer locations. Required when the ACT field on the ASR Form is N and the first position of the LTP field on the ASR Form is not A, G, H, I, J or K. Prohibited when the ACT field on the ASR Form is not N and first position of the LTP field on the ASR Form is A, G, H, I, J or K. Prohibited when UNE field on ASR Form is populated. Otherwise optional. Tells the provider why a circuit is exempt from the special access surcharge. Optional when the S25 field is A or B, otherwise prohibited.

13.

ER

S25 Exempt Reason

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-37

3.4 Transport Form


Field 14. SSS Data Description Length Type Usage Secondary Service Support 1 A Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the features, functions or options associated with this DNAL. Optional when the ACT field on the ASR Form is N or C and the BSA field on the ASR Form is populated, otherwise prohibited. Identifies the telephone number/TSC of the associated service when the DNAL is providing additional options/feature functionality to the associated service or the special access is utilizing the loop facility of the associated exchange service. Required when the SSS field is populated. Required when utilizing exchange loop facilities. Otherwise prohibited. Identifies the transfer feature indicator for transfer relay. Optional when the ACT field on the ASR Form is N, C, T or R and the UNE field on ASR Form is not populated, otherwise prohibited. Indicator designating a circuit portion as the master leg/segment on a multipoint configuration. Required for a multipoint circuit configuration when the ACT field on the ASR Form is N and this leg/segment is the master/alternate master. Prohibited when UNE field on the ASR Form is populated. Otherwise optional. Indicates the requirement for high voltage protection at a point of termination. Prohibited when UNE field on the ASR Form is populated or the ACT on the ASR is D, otherwise optional. Identifies the provider responsible for providing the SECLOC termination. Required when the ASC-EC field on the ASR Form is populated, the first position of the SECLOC field is E and the SI field on the SALI Form is N. Optional when the ASC-EC field on the ASR Form is populated and the SI field on the SALI Form is C. Optional when the ASC-EC field on the ASR Form is populated and the CKLT field is populated. Otherwise prohibited. Identifies the sequencing of all subsequent ISDN PRI DS1s and the total number of DS1s within the hunting arrangement. Required for ISDN PRI service when the ACT field on the ASR is N or C, the NOR field is greater than zero (0) and the SI field on the SALI From is C. Prohibited when the UNE field on the ASR Form is populated. Otherwise Optional. Identifies the CLLI code of the provider central office which provides bridging. Required for multipoint services when the ACT field on the ASR Form is N or C. Prohibited when the UNE field on the ASR Form is populated. Otherwise optional.

15.

ATN

Associated Telephone Number

12

A/N

Conditional

16.

TRF

Transfer Feature

A/N

Conditional

17.

MST

Master

Conditional

M = This is master leg/segment A = This is an alternate to the master leg R = Remove this as the master or alternate master leg/segment

18.

HVP

High Voltage Protection

Conditional

Y = Required R = Remove

19.

OTC

Other Exchange Company

A/N

Conditional

20.

ISDN SEQ.

ISDN Sequence

Conditional

21.

CKLT

Bridging Location

11

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-38

3.4 Transport Form


Field 22. NSL Data Description Number of Secondary Locations Length Type Usage 2 N Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the number of end points with circuit activity as shown on the MSL Form(s). Required when MSL Form(s) are associated with the request and the UNE field on the ASR Form is not populated, otherwise prohibited. Identifies the CFA as a provider carrier system. Required when the CFA is a provider carrier system, otherwise prohibited. Identifies the provider carrier system and channel to be used from a Wideband Analog, High Capacity or Optical Network facility when the customer has assignment control. The Connecting Facility Identification consists of 5 elements. 1. Facility Designation (1-5 characters) 2. Facility Type (1-6 characters) 3. Channel/Pair (1-5 characters) 4. Location A (8 or 11 characters) 5. Location Z (8 or 11 characters) Virgules (/) are used as delimiters to separate elements of the CFA. All element entries of the CFA are left justified with no trailing spaces. Required when the utilizing Wideband, or Hi-Cap, or Optical Network facilities or low speed connection of an unbundled multiplex network element and the ACT field on the ASR Form is N or C, otherwise optional. Identifies the direction of the circuits path when it ingresses (enters) on a bidirectional dedicated SONET ring identified in the PRI ADM field and the customer has assignment control. Optional when the PRI ADM field is populated, otherwise prohibited. Identifies the Synchronous Transport Signal (STS) Virtual Tributory (VT) Group and VT Timeslot of the ring. Required when the ACT field on the ASR Form is N, C or T, the FNI field on the ASR Form is populated and the customer has assignment control, otherwise prohibited. Identifies the provider carrier system and channel to be used from a Wideband Analog, High Capacity or Optical Network facility for a thru-connect configuration when the customer has assignment control. The Connecting Facility Identification consists of 5 elements. 1. Facility Designation (1-5 characters) 2. Facility Type (1-6 characters) 3. Channel/Pair (1-5 characters) 4. Location A (8 or 11 characters) 5. Location Z (8 or 11 characters) Virgules (/) are used as delimiters to separate elements of the CFA. All element entries of the CFA are left justified with no trailing spaces. Required when utilizing Wideband, High Capacity or Optical Network facilities and the ACT field on the ASR Form is N or C, Prohibited when the UNE field is populated. Otherwise optional.

23. 24.

CFAU CFA

CFA Use Connecting Facility Assignment

1 42

A A/N

Conditional Conditional

Y = Provider carrier system

25.

DIR

Directionality

Conditional

1 = High speed group side one 2 = High speed group side two

26.

CPT

Channel Pair/Timeslot

11

Conditional

27.

SCFA

Secondary Connecting Facility Assignment

42

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-39

3.4 Transport Form


Field 28. SDIR Data Description Secondary Directionality Length Type Usage 1 N Conditional Valid Entries 1 = High speed group side one 2 = High speed group side two

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the direction of the circuits path when it egresses (exits) on a bidirectional dedicated SONET ring, identified in the SEC ADM field and the customer has assignment control. Optional when the SEC ADM field is populated, otherwise prohibited. Identifies the terminating end of the circuit, a provider end office or the first point of switching for the circuit being provided. Required when the first position of the REQTYP field on the ASR Form is S and the ACT field on the ASR Form is N, C, M or T and the NSL field is not populated. Prohibited when the NSL field is populated. Otherwise optional. When ordering UNEs: 1) as IOF transport - prefix must be a C, followed by an 11 character CLLI identifying a second ACTL. 2) as Multipexing - prefix must be a C, followed by an 8 or 11 character CLLI identifying the VZ wire center performing the multiplexing function. 3) as DS1, DS3, OC3 or OC12 Loop or Voice Grade, DS0, DS1 or DS3 EEL Loop connection to an end user premises - prefix must be an E, followed by blanks. 4) as Dark Fiber in MA and NH - prefix must be a C, followed by an 11 character CLLI. 5) as IOF Dark Fiber in DC, DE, MD, ME, NJ, NY, PA, RI, VA, VT & WV - prefix must be a C, followed by an 11 character CLLI identifying a second ACTL. 6) as Loop Dark Fiber in DC, DE, MD, ME, NJ, NY, PA, RI, VA, VT & WV - prefix must be an E, followed by blanks. 7) as DTS - prefix must be a C, followed by an 11 character CLLI identifying a second ACTL and the 1st 8 characters must match the 1st 8 characters of the ACTL field on the ASR Form. 8) as UFSE - prefix must be a C, followed by an 11 character CLLI with a J in the 9th character position. Identifies the CLLI Code of the provider central office which provides multiplexing for a service riding a High Capacity service. Required when utilizing multiplexing services and the ACT field on the ASR Form is N, C or T, otherwise optional. Identifies the billing account to which the recurring and non-recurring charges for the original High Capacity channel are billed. Required when the ACT field on the ASR Form is N or C, the CFA field is populated and ratcheting of the Hi-Cap account is required. Prohibited when the UNE field on the ASR Form is populated. Otherwise optional. Identifies a provider central office add drop multiplexer location used as a service access point when the ACTL/primary location is located off the ring network. Required when the ACTL is located off the ring and the ACT field on the ASR Form is N, C or T and the UNE field on the ASR Form is not populated, otherwise prohibited.

29.

SECLOC

Secondary Location

12

A/N

Conditional

Prefix E = followed by Blanks (Used if SECLOC is end user s premise (for special access, includes a second ACTL or CENTREX termination) on the SALI Form must be populated in EUNAME field on the SALI form) C = followed by CLLI Code(Used if SECLOC is a provider end office switch(non-CENTREX) or a secondary ACTL when termination is UNE transport.

30.

MUXLOC

Multiplexing Location

11

A/N

Conditional

31.

HBAN

High Capacity Channel Billing Account Number

12

A/N

Conditional

Valid Billing Account Number E = Existing

32.

PRI ADM

Primary Add Drop Multiplexer

11

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-40

3.4 Transport Form


Field SEC ADM Data Description Secondary Add Drop Multiplexer Length Type Usage 11 A/N Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies a provider central office add drop multiplexer location used as a service access point when the secondary location is located off the ring network. Required when the secondary location is located off the ring and the ACT field on the ASR Form is N, C or T and the UNE field on the ASR Form is not populated, otherwise prohibited. Indicates the source of the timing for the port which carries the broadband intercarrier interface on the broadband switching system. Optional when the first position of the REQTYP field on the ASR Form is V, otherwise prohibited. Identifies the number of VCs requested. Required when the first position of the REQTYP field on the ASR Form is V and VC Form(s) are associated with the request, otherwise prohibited. Identifies the speed of the port. The last character is always expressed in megabits (M) or kilobits (K). Required when the first position of the REQTYP field on the ASR Form is V, the ACT field on the ASR Form is N, and utilizing fractional T1. Prohibited when the first position of the REQTYP field on the ASR Form is S. Prohibited when the first position of the REQTYP field on the ASR Form is V and the ACT field on the ASR Form is M or T. Otherwise optional. Identifies the VC status signaling protocol. Required when the first position of the REQTYP field on the ASR Form is V and the ACT field on the ASR Form is N. Optional when the first position of the REQTYP field on the ASR Form is V and the ACT on the ASR Form is C, D or R. Otherwise prohibited. Identifies if the service ordered is to be network to network or user to network. Required when the first position of the REQTYP field on the ASR Form is V and the ACT field on the ASR Form is N. Optional when the first position of the REQTYP field on the ASR Form is V and the ACT field on the ASR Form is C, D or R. Otherwise prohibited. Identifies if the customers broadband customer premises equipment (CPE) is unable to support B8ZS. Optional when the first position of the REQTYP field on the ASR Form is V and the ACT field on the ASR Form is N, C, D or R, otherwise prohibited. Identifies category of virtual service requested. Required when first position of REQTYP field on the ASR Form is V, otherwise prohibited. Indicates the customer request for end-to-end (A to Z) standard acceptance testing at service delivery when a smart jack (SMJK) is requested. Optional when the SMJK field on the SALI Form is populated and the UNE field on the ASR Form is not populated, otherwise prohibited.

33.

34.

CLK

Clock Source

Conditional

1 = Internal 2 = External 3 = Loop

35.

NVC

Number of Virtual Connections Port Speed

Conditional

36.

PSPEED

A/N

Conditional

37.

LMP

Link Management Protocol

Conditional

1 = LMI 2 = Annex A 3 = Annex D 4 = Auto 5 = Other (i.e., RLMI version) 6 = None N = NNI U = UNI

38.

N/U

NNI or UNI

Conditional

39.

ZLG

Zero Logic

Conditional

Y = CPE does not support B8ZS

40.

BSC

Broadband Service Category End To End Test

Conditional

C = Cell Relay (ATM) F = Frame Relay Y = End to end testing requested

41.

ETET

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-41

3.4 Transport Form


Field CCEA Data Description Cross Connect Equipment Assignment Length Type Usage 60 A/N Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the physical point of cross connection at a collocation arrangement. This information is provided by the customer when they have assignment control. When the CCEA field is populated, the information will identify the tie-down assignment at the ACTL. When ordering UNEs with a connection(s) to a central office collocation arrangement(s), CCEA is required. When ordering a connection(s) to a secondary collocation arrangement(s), connection assignment information must appear in the SCCEA field. Identifies the physical point of termination at the secondary collocation arrangement. This information is provided by the customer when they have assignment control. When the SCCEA field is populated, the information will identify the tie-down assignment at the SECLOC. When ordering UNEs with a connection(s) to a collocation arrangement identified in the SECLOC field, SCCEA is required. When ordering connections to a central office collocation arrangement identified in the ACTL field on the ASR Form, connection assignment information must appear in the CCEA field. Identifies the requirement for non-tariff or secondary tariff options in conjunction with the access service and special arrangements (third party billing). Prohibited when the UNE field on the ASR Form is populated, otherwise optional. Identifies the billing telephone number for charges associated with options listed in the GETO field excluding insider wire. Prohibited when the GETO field is A, E, S, T, U, V, W, Y, Z or not populated, otherwise optional. Identifies the name of the person to be contacted for additional information regarding GETO options. Required when GETO field is A, E, M, O, P, R, T, V, Y or Z and the entry in this field is different that the BILLCON field on the ASR Form, otherwise optional. Identifies the telephone number of the person named in the GCON field. Required when GCON is populated, otherwise prohibited. 10 N Conditional Identifies the main (listed) telephone number of the CENTREX switch. Required when the special access service requested terminates in a CENTREX and the UNE field on the ASR Form is not populated, otherwise prohibited. Identifies the listed name of the CENTREX customer whose listed number appears in the CTX TEL field. Optional when the CTXTEL field is populated, otherwise prohibited. Identifies the first circuit/facility cross-connected in the same wire center. Required when the service being ordered is cross-connected to an existing service of equal value, otherwise prohibited.

42.

43.

SCCEA

Secondary Cross Connect Equipment Assignment

60

A/N

Conditional

44.

GETO

General Exchange Tariff Options Code General Exchange Tariff Options Billing Telephone Number General Exchange Tariff Option Contact Name

Conditional

45.

GBTN

10

A/N

Conditional

46.

GCON

25

A/N

Conditional

47. 48.

GTEL CTX TEL

General Exchange Tariff Option Contact Telephone Number CENTREX Telephone Number CENTREX Listed Name

15

Conditional

49.

CTX LSTD NM

25

A/N

Conditional

50.

WACD1

Work Authorization Circuit Detail 1

36

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-42

3.4 Transport Form


Field WACD2 Data Description Work Authorization Circuit Detail 2 Remarks Length Type Usage 36 A/N Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the second circuit/facility cross-connected in the same wire center. Required when the service being ordered is cross-connected to an existing service of equal value, otherwise prohibited. Identifies a free flowing field which can be used to expand upon and clarify other data on this form.

51.

52.

REMARKS

124

A/N

Optional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-43

3.5 ACI Additional Circuit Information Form

Verizon ASR Business Rules v 27

3.5 ACI Additional Circuit Information Form


ACI Form - Specific Data
1. 2. 3. 4. Field CCNA PON VER ASR NO Data Description Customer Carrier Name Abbreviation Purchase Order Number Version Identification Access Service Request Number Length 3 16 2 18 Type A A/N A/N A/N Usage Required Required Conditional Optional Valid Entries IAC Code ZZZ = Casual customer or end user billing Notes And Conditions Identifies the COMMON LANGUAGE IAC code for the customer submitting the ASR and receiving the Confirmation Notice Form (CN). This entry must be identical to the CCNA field on the ASR Form. Identifies the customers unique purchase-order or requisition number that authorizes the issuance to this request or supplement. This PON field entry must be identical to the PON field entry on the ASR Form. Identifies the customers version number. This entry must be identical to the VER field entry on the ASR Form. Required when the VER field on the ASR Form is populated, otherwise prohibited. Identifies the number that may be generated by the provider mechanized systems, pre-assigned to the customer by the provider, or manually assigned by the provider to identify an customers request for service. Required when ASR NO is pre-assigned Required on all supplements when PON is not unique. Otherwise optional. Identifies the circuit number or range of circuit numbers used by the customer. Identifies the first circuit or segment as a unique number and each additional circuit or circuit segment as a unique number. The REF NUM is customer assigned and is returned on the confirmation notice to the ordering customer. Once REF NUM is generated it cannot be changed and is retained through completion of the request. The values are to be assigned consecutively beginning wit 0002. The value 0001 is reserved for the associated service specific form. Identifies cancellation activity that is occurring on this circuit per this request. Required when the circuit quantity is decreasing and the SUP field on the ASR Form is 3 or 4, otherwise prohibited.

5. 6.

CKR REF NUM

Customer Circuit Reference Reference Number

53 4

A/N N

Optional Required

7.

CKTACT

Circuit Activity

Conditional

K = Cancellation

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-44

3.5 ACI Additional Circuit Information Form


Field 8. CFA Data Description Connecting Facility Assignment Length 42 Type A/N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the provider carrier system and channel to be used from a Wideband Analog, High Capacity or Optical Network facility when the customer has assignment control. The Connecting Facility Assignment consists of 5 elements. 1. Facility Designation (1-5 characters) 2. Facility Type (1-6 characters) 3. Channel/Pair (1-5 characters) 4. Location A (8 or 11 characters) 5. Location Z (8 or 11 characters) On initial facility order (Dedicated Trunk Port or Extended Dedicated Trunk Port), an entry of NEW may be used. Virgules (/) are used as delimiters to separate the all elements of the CFA. All element entries of CFA are left justified with no trailing spaces. Required when the CFA field on the FGA, Trunking, Transport or EUSA Form is populated, otherwise optional. Identifies the direction of the circuits path when it ingresses (enters) on a bidirectional dedicated SONET ring, identified in the PRI ADM field on the Transport or EUSA Form, and the customer has assignment control. Optional when the PRI ADM field on the Transport or EUSA Form is populated, otherwise prohibited. Identifies the Synchronous Transport Signal (STS), Virtual Tributary (VT) Group and VT Timeslot of the ring. Required when the ACT field on the ASR Form is N, C or T the FNI field on the ASR Form is populated and the customer has assignment control, otherwise prohibited. Identifies the CFA as a provider carrier system. Required when the CFA is a provider carrier system, otherwise prohibited. Identifies the billing account to which the recurring and non-recurring charges for the original High Capacity channel are billed. Required when the HBAN field on the FGA, Trunking or Transport Form is populated. Prohibited when the UNE field on the ASR Form is populated. Otherwise optional. Identifies the circuit number or range of circuit numbers used by the customer for the T1 Transport involved. Optional in a single ASR environment for LTR requirements. Optional when ordering unbundled dedicated trunk ports. Otherwise prohibited

9.

DIR

Directionality

Conditional

1 = High speed group side one 2 = High speed group side two

10.

CPT

Channel Pair/Timeslot

11

Conditional

11. 12.

CFAU HBAN

CFA Use High Capacity Channel Billing Account Number

1 12

A A/N

Conditional Conditional

Y = Provider carrier system Valid Billing Account Number E = Existing

13.

CKR1

Customer Circuit Reference (T1)

40

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-45

3.5 ACI Additional Circuit Information Form


Field SCFA Data Description Secondary Connecting Facility Assignment Length 42 Type A/N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the provider carrier system and channel to be used from a Wideband Analog, High Capacity or Optical Network facility when the customer has assignment control. The Secondary Connecting Facility Assignment consists of 5 elements. 1. Facility Designation (1-5 characters) 2. Facility Type (1-6 characters) 3. Channel/Pair (1-5 characters) 4. Location A (8 or 11 characters) 5. Location Z (8 or 11 characters) On initial facility order (Extended Dedicated Trunk Port), an entry of NEW may be used. Virgules (/) are used as delimiters to separate all elements of the SCFA. All element entries of the SCFA are left justified with no trailing spaces. Required the SCFA field on the FGA, Trunking or Transport Form is populated, otherwise optional. Identifies the direction of the circuits path when it egresses (exits) on a bidirectional dedicated SONET ring, identified in the SEC ADM field on the Transport or EUSA Form, and the customer has assignment control. Optional when the SEC ADM field on the Transport or EUSA Form is populated, otherwise prohibited. Identifies a specific trunk for which CCS is being performed. The TCIC numeric characters are right justified with leading zeros. The ten thousand digit should always be zero. Some switch types require customer/ provider negotiation in assigning TCIC codes. Required on all requests for CCS trunks, otherwise optional. Identifies the physical point of termination at a collocation arrangement. Required when CCEA field on the Trunking or Transport Form is populated, Otherwise optional. Identifies the ringer equivalence number of the terminal equipment. Optional when the ACT field on the ASR Form is N, C or T, otherwise prohibited. Identifies the standard code for the particular registered or non-registered jack used to terminate the service. Required when the JS (SECLOC) field is E or N. Prohibited when the JS (SECLOC) field is not populated. Otherwise optional. Identifies the standard code for a Protective Connecting Arrangement (PCA). Required when the first position REQTYP on the ASR form is W, S or E, the PCA field on the SALI Form is populated and the PI field on the SALI Form is blank, otherwise prohibited. Identifies the number of the existing jack used on private end user connections. Required when the JK CODE (SECLOC) field is populated, otherwise prohibited.

14.

15.

SDIR

Secondary Directionality

Conditional

1 = High speed group side one 2 = High speed group side two

16.

TCIC

Trunk Circuit Identification Code

11

Conditional

A five numeric entry or range of five numeric entries. If the entry ends in 97, 98, 99, or 00, the NS field on the Trunking form, must be populated.

17.

CCEA

Cross Connect Equipment Assignment Ringer Equivalence Number Jack Code (Secondary Location)

60

A/N

Conditional

18.

REN

A/N

Conditional

19.

JK CODE

A/N

Conditional

20.

PCA

Protective Connecting Arrangement (Secondary Location) Jack Number (Secondary Location)

A/N

Conditional

21.

JK NUM

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-46

3.5 ACI Additional Circuit Information Form


Field JK POS JS Data Description Jack Position (Secondary Location) Jack Status (Secondary Location) Length 2 1 Type N A Usage Conditional Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the position in the jack that a particular circuit will occupy. Required when the JK CODE (SECLOC) field is populated, otherwise prohibited. Indicates whether the access service is to terminate at a new or existing registered jack or demarc. Required when the first position REQTYP on the ASR Form is W, S or E, the JS field on the SALI Form is populated and the PI field on the SALI Form is blank, otherwise prohibited. When UNE field on ASR Form = Y, D and F are the only valid entries. Identifies a request for installation or removal of the non-hunt number feature in a hunt group. Optional when the first position of the REQTYP field on the ASR Form is A or W and the ACT field on the ASR Form is N, C or T, otherwise prohibited. Identifies non-hunt telephone numbers in ESS multi-line groups. Required when the NHNI field on the FGA, WAL or ACI Form is populated and the SUP field on the ASR Form is 3, otherwise optional. Identifies a related provider order associated with this service. A = The customer certifies that the access service is terminated in a device not capable of interconnecting the service with local exchange service B = The customer has a blanket exemption certification on file with the provider C = is applicable to all circuits NA = Not applicable Prohibited when the ACT field on the ASR Form is R, otherwise optional. Identifies whether a surcharge is applicable (non-exempt) or non-applicable (exempt) for the number of voice grade circuits ordered between two customer locations. Required when the ACT field on the ASR Form is N and the surcharge status for a circuit differs from that shown in the S25 field on the related service specific form. Prohibited when the first position of the REQTYP field on the ASR Form is A, M or L. Prohibited when the UNE field on the ASR Form is populated. Otherwise optional. Tells the provider why a circuit is exempt from the special access surcharge. Optional when the S25 field is A or B, otherwise prohibited. Identifies a provider circuit ID or multiple circuit IDs. The provider assigning this circuit identifier determines the content of this field in accordance with COMMON LANGUAGE standards maintained by Telcordia Technologies. When a component within the format is purposely omitted, the component should still be delimited and compressed to eliminate any spaces. All components within the ECCKT should be delimited by either virgules or periods. If all positions in a component within the ECCKT are not populated, the component should be compressed to eliminate any spaces. Required when the ECCKT field on the ASR Form is populated, otherwise optional.

22. 23.

N = New E = Existing registered jack D = New demarc F = Existing demarc

24.

NHNI

Non-Hunt Number Indicator

Conditional

Y = Install R = Remove

25.

NHN

Non-Hunting Number

Conditional

26. 27.

RORD S25

Related Order Number Surcharge Status

17 8

A/N A/N

Conditional Conditional

28. 29.

ER ECCKT

S25 Exempt Reason Exchange Company Circuit ID

1 53

N A/N

Conditional Conditional COMMON LANGUAGE Special Service Circuit Codes (CLCI S/S Codes) Telephone Number Format COMMON LANGUAGE Special Service Circuit Codes (CLCI S/S Codes) COMMON LANGUAGE Message Trunk Circuit Codes (CLCI MSG Codes) COMMON LANGUAGE Facility Codes (CLFI Codes)

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-47

3.5 ACI Additional Circuit Information Form


Field 30. TRN Data Description Trunk Number Length 9 Type N Usage Conditional Valid Entries 0-9999

Verizon ASR Business Rules v 27


Notes And Conditions Identifies a specific customer trunk number or trunk number range. Trunk number component in the message format is a variable length, one to four character numeric code and trunk numbers of fewer than 4 characters are left justified with remaining spaces not filled. Leading zeros are not to be used as part of the trunk number. However, the trunk number zero is allowed. Optional when the first position of the REQTYP field on the ASR Form is M and the TCIC field is not populated, otherwise prohibited. Identifies the physical point of termination at the secondary collocation arrangement. Required when SCCEA field on the Transport Form is populated. Otherwise optional. Identifies the standard code for the particular registered or non-registered jack used to terminate the service. Required when the JS (PRILOC) field is E or N. Prohibited when the JS (PRILOC) field is not populated. Otherwise optional. Identifies the standard code for a Protective Connecting Arrangement (PCA). Required when the first position of the REQTYP field on the ASR Form is E, the PCA field on the SALI Form is populated and the PI field on the SALI Form is Y, otherwise prohibited. Indicates whether the access service is to terminate at a new or existing registered jack or demarc. Required when the first position of the REQTYP is E, the JS field on the SALI Form is populated and the PI field on the SALI Form is Y, otherwise prohibited. Identifies the first circuit/facility cross-connected in the same wire center. Required when the service being ordered is cross-connected to an existing service of equal value, otherwise prohibited. Identifies the second circuit/facility cross-connected in the same wire center. Required when the service being ordered is cross-connected to an existing service of equal value, otherwise prohibited. Indicates a need to provide a remote loop back (Smart) capabilities at the premises for the new jack requested for this service. Optional when the first position of the REQTYP field on the ASR is E or X, otherwise prohibited. Indicates a need to provide a remote loop back (Smart) capabilities at the premises for the new jack requested for this service. Prohibited when the UNE field on the ASR Form is populated, otherwise prohibited.

31.

SCCEA

Secondary Cross Connect Equipment Assignment Jack Code (Primary Location)

60

A/N

Conditional

32.

JK CODE

A/N

Conditional

33.

PCA

Protective Connecting Arrangement (Primary Location) Jack Status (Primary Location)

A/N

Conditional

34.

JS

Conditional

35.

WACD1

Work Authorization Circuit Detail 1 Work Authorization Circuit Detail 2 Smart Jack (PRILOC)

36

A/N

Conditional

36.

WACD2

36

A/N

Conditional

37.

SMJK

Conditional

38.

SMJK

Smart Jack (SECLOC)

Optional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-48

3.5 ACI Additional Circuit Information Form


Field ISDN SEQ. Data Description ISDN Sequence Length 4 Type N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the sequencing of all subsequent ISDN PRI DS1s and the total number of DS1s within the hunting arrangement. Required for ISDN PRI service when the ACT field on the ASR Form is N or C, the NOR field on the ASR Form is greater than 0 and the SI field on the SALI Form is C. Prohibited when the UNE field on the ASR Form is populated. Otherwise Optional. Identifies the access service group assigned to a particular circuit or group of circuits. This number appears on the billing service charge detail of the Customer Service Record (CSR) which was forwarded to the customer when the service was installed or when there was a change to the bill resulting from service order activity. The ASG may be provided on the Confirmation Notice Form (CN) by the provider. If a new ASG is being requested, then the only valid entry is N. Identifies the related provider order number or range of order numbers to be completed on the same date as this one. Prohibited when the ACT field on the ASR Form is R, otherwise optional. Identifies the associated Trunking facility being disconnected. Required when the associated facility does not appear in the RECCKT field on the service specific form or another ACI Form, the ACT field on the ASR Form is D and the first position of the REQTYP field on the ASR Form is M or A, otherwise prohibited. Required when the unbundled dedicated trunk port does not appear on the RECCKT field on the service specific form or another ACI Form, the ACT field on the ASR Form is D, and the first position of the REQTYP field on the ASR Form is M Otherwise prohibited.

39.

40.

ASG

Access Service Group

A/N

Optional

41.

CRO

Complete with Related Order Related Exchange Company Circuit Identification

17

A/N

Conditional

42.

RECCKT

42

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-49

3.6 SALI - Service Address Location Information

Verizon ASR Business Rules v 27

3.6 SALI - Service Address Location Information


Required when the prefix type of the SECLOC field on the Transport Form is E, otherwise prohibited.

SALI Form - Specific Data


1. 2. 3. 4. Field CCNA PON VER ASR NO Data Description Customer Carrier Name Abbreviation Purchase Order Number Version Identification Access Service Request Number Length 3 16 2 18 Type A A/N A/N A/N Usage Required Required Conditional Conditional Valid Entries IAC Code Notes And Conditions Identifies the COMMON LANGUAGE IAC code for the customer submitting the ASR and receiving the Confirmation Notice (CN) Form. This CCNA field entry must be identical to the CCNA field entry on the ASR Form. Identifies the customers unique purchase-order or requisition number that authorizes the issuance to this request or supplement. This PON field entry must be identical to the PON field entry on the ASR Form. Identifies the customers version number. This entry must be identical to the VER field entry on the ASR Form. Required when the VER field on the ASR Form is populated, otherwise prohibited. Identifies the number that may be generated by the provider mechanized systems, pre-assigned to the customer by the provider, or manually assigned by the provider to identify a customers request for service. This ASR NO field entry must be identical to the ASR NO field entry on the ASR Form. Required when ASR NO is pre-assigned Required on all supplements when PON is not unique. Otherwise optional. Identifies the page number and total number of pages contained in this transaction. Identifies the unique number assigned to the specific location for which the service address applies. Required when the NSL field on the service specific form is populated and the first position of the SECLOC field on the MSL Form is E. Required when the first position of the REQTYP field on the ASR Form is R and the first position of the PRILOC field on the ARI Form is E. Otherwise prohibited. Identifies that the service address location information being provided is a primary location. Required when the first position of the PRILOC field on the EUSA, RING or ARI Form is E, otherwise prohibited.

5. 6.

PG _ of __ REF NUM

Page _ of _ Reference Number

4 4

N N

Required Conditional

7.

PI

Primary Location Indicator

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-50

3.6 SALI - Service Address Location Information


Field EUNAME Data Description End User Name Length 25 Type A/N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the end user name associated with the termination location. Required when the first position of the PRILOC or SECLOC field on the EUSA Form is E. Required when the first position of the SECLOC field on the WAL, Transport, EUSA or MSL Form is E. Required when the first position of the PRILOC or SECLOC field on the ARI Form is E and the SPOT (PRI) field on the Ring and/or ARI Forms is not populated. Optional when the first position of the PRILOC field on the ARI Form is E and the SPOT (PRI) field on the Ring and/or ARI Forms is a CLLI Code Otherwise prohibited. Identifies the format of the address being supplied. Optional when the SASN field is populated, otherwise prohibited. Identifies that the service address is a new construction. Optional when the first position of the PRILOC field on the EUSA, Ring and/or ARI Forms is E. Optional when the first position of the SECLOC field on the WAL, Transport, EUSA or MSL Form is E. Otherwise prohibited. Identifies the prefix for the address number of the service address. Optional when the SANO field is populated, otherwise prohibited. Identifies the number of the service address. Required when the AFT field is C Optional when the SASN field is populated. Otherwise prohibited. Identifies the suffix for the address number of the service address. N S E W NE NW SE SW = = = = = = = = North South East West Northeast Northwest Southeast Southwest Optional when the SANO field is populated, otherwise prohibited. Identifies the street directional prefix for the service address. Optional when the SASN field is populated, otherwise prohibited.

8.

9.

AFT

Address Format Type

Conditional

10.

NCON

New Construction

Conditional

A = Rural Rout and / or Box Number B = Unnumbered C = Provider Assigned House Number D = Descriptive Address Y = Yes

11. 12.

SAPR SANO

Address Number Prefix Address Number

6 10

A/N A/N

Conditional Conditional

13. 14.

SASF SASD

Address Number Suffix Street Directional Prefix

4 2

A/N A

Conditional Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-51

3.6 SALI - Service Address Location Information


Field SASN Data Description Street Name Length 60 Type A/N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the street name of the service address. Required when the first position of the REQTYP field on the ASR Form is S or V, the ACT field on the ASR From is N, C, M or T, the EUNAME field is populated and the SI field is not C". Required when the first position of the REQTYP field on the ASR Form is E or X, the ACT field on the ASR From is N, C, M or T, the EUNAME field is populated and the SI field is not C. Required when the first position of the REQTYP field on the ASR Form is W, the ACT field on the ASR From is N, M or T, the EUNAME field is populated and the SI field is not C. Required when the LEGACT field on the MSL Form is N, C or M, the EUNAME field is populated and the SI field is not C. Required when the first position of the REQTYP field on the ASR Form is R, the ACT field on the ASR From is N, C, M or T, the EUNAME field is populated. Otherwise optional. Identifies the thoroughfare portion of the street name of the service address. N S E W NE NW SE SW = = = = = = = = North South East West Northeast Northwest Southeast Southwest Optional when the SASN field is populated, otherwise prohibited. Identifies the street directional suffix of the service address. Optional when the SASN field is populated, otherwise prohibited.

15.

16. 17.

SATH SASS

Street Type Street Directional Suffix

7 2

A/N A

Conditional Conditional

18.

LD1

Location Designator #1

Conditional

Identifies additional specific information related to the service address (e.g., building, floor, room). Optional when the SASN field is populated, otherwise prohibited. Required when the ACT field on the ASR Form is N or T and the SASN field is populated, otherwise prohibited. Identifies the value associated with the first location designator of the service address. Optional when the LD1 field is populated, otherwise prohibited. Required when the LD1 field is populated, otherwise prohibited. Identifies additional specific information related to the service address (e.g., building, floor, room). Optional when the SASN field is populated, otherwise prohibited. Identifies the value associated with the second location designator of the service address. Optional when the LD2 field is populated, otherwise prohibited.

19.

LV1

Location Value #1

10

A/N

Conditional

20.

LD2

Location Designator #2

Conditional

21.

LV2

Location Value #2

10

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-52

3.6 SALI - Service Address Location Information


Field 22. LD3 Data Description Location Designator #3 Length 4 Type A Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies additional specific information related to the service address (e.g., building, floor, room). Optional when the SASN field is populated, otherwise prohibited. Identifies the value associated with the third location designator of the service address. Optional when the LD3 field is populated, otherwise prohibited. Identifies the city, village, township, etc. of the service address. Required when the SASN field is populated, otherwise prohibited. Identifies the state / province of the service address. Required when the SASN field is populated, otherwise prohibited. Identifies the ZIP code, ZIP code + extension or postal code of the service address. Required when the SASN field is populated, otherwise prohibited. Identifies additional location information about the service address. Identifies the ringer equivalence number of the terminal equipment. Prohibited when the ACT field on the ASR Form is R. Prohibited when the LEGACT field on the MSL Form is D, M or R. Otherwise optional. Identifies the standard code for the particular registered or non-registered jack used to terminate the service. Required when the JS field is E or N. Prohibited when the JS field is not populated. Otherwise optional. Identifies the number of the existing jack used at service address location. Required when the JK CODE field is populated, otherwise prohibited. Identifies the position in the jack that a particular circuit will occupy. Required when the JK CODE field is populated, otherwise prohibited.

23.

LV3

Location Value #3

10

A/N

Conditional

24. 25. 26. 27. 28.

CITY STATE ZIP AAI REN

City State / Province Zip / Postal Code Additional Address Information Ringer Equivalence Number

32 2 12 60 4

A/N A A/N A/N A/N

Conditional Conditional Conditional Optional Conditional

29.

JK CODE

Jack Code

A/N

Conditional

30. 31.

JK NUM JK POS

Jack Number Jack Position

2 2

A/N N

Conditional Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-53

3.6 SALI - Service Address Location Information


Field 32. JS Data Description Jack Status Length 1 Type A Usage Conditional Valid Entries D = New demarc E = Existing registered jack F = Existing demarc N = New - constitutes an order for a registered jack

Verizon ASR Business Rules v 27


Notes And Conditions Indicates whether the access service is to terminate at a new or existing registered jack or demarc. Prohibited when first position of REQTYP on the ASR Form = R. Required when the ACT field on the ASR Form is N or T, the PCA field is not populated, the EUNAME field is an end user name and the SI field is not C. Required when the LEGACT field on the MSL Form is N, the PCA field is not populated, the EUNAME field is an end user name and the SI field is not C. Optional when the ACT field on the ASR Form is C, D or M, the PCA field is not populated, the EUNAME field is populated and the SI field is not C. Optional when LEGACT field on the MSL Form is C, D, M or K, the PCA field is not populated, the EUNAME field is an end user name and the SI field is not C. Otherwise prohibited. When UNE field on ASR Form = Y, the EUNAME field is populated and the SI field is not C, JS entry must indicate demarc. Indicates a need to provide remote loop back (Smart) capabilities, at the premises, for the new jack requested for this service. Prohibited when the UNE field on the ASR Form is populated, otherwise optional. Identifies the standard code for a Protective Connecting Arrangement (PCA). Prohibited when first position of the REQTYP field on ASR Form is R. Required when the ACT field on the ASR Form is N or T, the JS field is not populated, the EUNAME field is populated and the SI field is not C. Required when the LEGACT field on the MSL Form is N, the JS field is not populated, the EUNAME field is an end user name and the SI field is not C. Optional when the ACT field on the ASR Form is C, D or M, the JS field is not populated, the EUNAME field is populated and the SI field is not C. Optional when LEGACT field on the MSL Form is C, D, M or K, the JS field is not populated, the EUNAME field is an end user name and the SI field is not C. Otherwise prohibited.

33.

SMJK

Smart Jack

Conditional

Y = Provide Smart Jack

34.

PCA

Protective Connecting Arrangement

A/N

Conditional

35. 36.

SI SPOT

Secondary Point of Termination Indicator Secondary Point of Termination

1 11

A A/N

Conditional Conditional

C = CLLI Code N = Narrative

When UNE field on ASR Form = Y, PCA is prohibited. Identifies whether the SPOT field contains a CLLI code or a narrative. Required when SPOT field is populated, otherwise prohibited. This field may be used to enter a CLLI Code or a narrative format to identify a physical point of termination at the noted location. This field may contain a frame designation, block identification, etc. Prohibited when first position of the REQTYP field on the ASR Form is R. Required for CENTREX terminations when the ACT field on the ASR Form is N, C or M. Otherwise optional. When UNE field on the ASR Form = Y, SPOT may not identify a CENTREX. (Since CX TEL and CXT LSTD NM on the Transport Form are shaded for UNEs and they are required when SPOT identifies a CENTREX, SPOT practically can not identify a UNE CENTREX.)

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-54

3.6 SALI - Service Address Location Information


Field ICOL Data Description ICO Location Length 8 Type A/N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes And Conditions Identifies the serving wire center of the Independent Company (ICO) for the end user location. Optional when the ASC-EC field on the ASR Form and the SASN field are populated, otherwise prohibited. Identifies the local contact name for access. The contact will be made at the time of installation or disconnect for gaining access to service address location. This is the name of the person to be contacted using the telephone number in the ACTEL field. Required when the first position of the REQTYP field on the ASR Form is W or S, the ACT field on the ASR From is N, M or T, the EUNAME field is populated and the SI field is not C. Required when the first position of the REQTYP field on the ASR Form is A, W, S or E, the LEGACT field on the MSL Form is N, C or M, the EUNAME field is populated and the SI field is not C. Required when the first position of the REQTYP field on the ASR Form is E, the ACT field on the ASR From is N, C, M or T, the EUNAME field is populated and the SI field is not C. Required when the first position of the REQTYP field on the ASR Form is R, the ACT field on the ASR From is N and the EUNAME field is populated. Required when the first position of the REQTYP field on the ASR Form is R, the ACT field on the ASR From is C, the SEGACT field on the RING Form is N or C and the EUNAME field is populated. Otherwise optional. Identifies the telephone number to be used for the purpose of arranging access to the service address location for installation purposes. Whenever possible, this number should be working at the service address location. Required when the LCON field is populated, otherwise optional. Identifies the alternate telephone number to be used for the purpose of arranging access to the service address location for installation purposes. Identifies the pager number to be used for the purpose of arranging access to the service address location for installation purposes. Identifies the pager PIN number to be used for the purpose of arranging access to the service address location for installation purposes. Optional when the ACPGN field is populated, otherwise prohibited. Identifies the alternate local contact name fo access. Identifies the telephone number associated with the local contact Required when the ALCON field is populated, otherwise prohibited. Indicates the access instructions for the service address location. Prohibited when the ACT field on the ASR Form is R, otherwise optional. Identifies working telephone number at the service address location.

37.

38.

LCON

Local Contact

15

A/N

Conditional

39.

ACTEL

Access Telephone Number

15

A/N

Conditional

40. 41. 42.

AACTEL ACPGN ACPPN

Alternate Access Telephone Number Access Pager Number Access Pager PIN Number

15 12 8

N A/N A/N

Optional Optional Conditional

43 44 45 46

ALCON ALCON TEL ACC WKTEL

Alternate Local Contact Alternate Local Contact Telephone Number Access Information Working Telephone Number

15 14 45 12

A/N N A/N A/N

Optional Conditional Conditional Optional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-55

3.7 TQ - Translation Questionnaire

Verizon ASR Business Rules v 27

3.7 TQ - Translation Questionnaire


Used in VZ in DC, DE, MA, ME, MD, NH, NJ, NY, PA, RI, VA, VT & WV.

TQ Form Specific Data


1. 2. 3. 4. Field CCNA PON VER ASR NO Data Description Customer Carrier Name Abbreviation Purchase Order Number Version Identification Access Service Request Number Length 3 16 2 18 Type A A/N A/N A/N Usage Required Required Conditional Conditional Valid Entries Notes & Conditions IAC Code Identifies the COMMON LANGUAGE IAC code for the customer submitting the ZZZ = Casual customer or end user billing ASR and receiving the Confirmation Notice Form (CN). This entry must be identical to the CCNA field entry on the ASR Form. Identifies the customers unique purchase order or requisition number that authorizes the issuance of this request or supplement. This PON field entry must be identical to the PON field entry on the ASR Form. Identifies the customers version number. This entry must be identical to the VER field entry on the ASR Form. Required when the VER field on the ASR Form is populated, otherwise prohibited. Identifies the number that may be generated by the provider mechanized systems, pre-assigned to the customer by the provider, or manually assigned by the provider to identify a customers request for service. This entry must be identical to the ASR NO field entry on the ASR Form. If a unique PON is not utilized, the ASR NO field is required on all supplements. If the provider mechanically generates or manually assigns this ASR NO then the initial request will be populated by the ICSC. If pre-assigned the customer will provide. On all Supplements the customer will populate this field if the PON is not unique. Required when ASR NO is pre-assigned Required on all supplements when PON is not unique. Otherwise optional. Identifies the employee or office of the customer or agent that should be contacted on technical matters regarding this TQ. Required when the first position of the TQ field on the ASR Form is B, U, D, L, W, T, M or X, otherwise prohibited. Identifies the telephone number of the customer technical contact. Required when the TECH CON (Translation) field is populated, otherwise prohibited.

5.

TECH CON

Customer Technical Contact (Translation)

15

A/N

Conditional

6.

TEL NO

Technical Contact Telephone Number (Translation)

15

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-56

3.7 TQ - Translation Questionnaire


Field TTEST TN Data Description Translations Test Telephone Number Length Type 10 N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the ten digit test telephone number to be used by the provider for call through testing. Required when the first position of the TQ field on the ASR Form is B, U, D, T, L, M, W or X and the ACT field on the ASR Form is N, the ACTI field on the ASR Form is C and the DIR is 1O, 2W or 2O. Optional when the first position of the TQ field on the ASR Form is B, U, D, T, L, M, W or X, the ACTI field on the ASR Form is B and the DIR is 1O, 2W or 2O.

8 9 10

TTEST RESPONSE REF TG ACT

Translation Test Response Referenced Trunk Group Trunk Group Activity

62 1 1

A/N A A

Conditional Conditional Conditional

Identifies the expected announcement response when reaching customer test number. Required when TTEST TH field is populated, otherwise prohibited. Identifies the trunk group within the Common Section Matrix. Identifies the translation activity taking place for each trunk group. Required when the first position of the TQ field on the ASR Form is B, U, D, L, W, T, M or X, otherwise prohibited.

11

TGTYP

Trunk Group Type

Conditional

N = New Trunk Group C = Trunking section and Common section changes D = Disconnect Trunk Group R = Trunking section change only M = Interconnection Translation Routing, Trunking and Common Sections F = Common Section Change only K = Cancel pending activity E = Existing/info Z = OZZ/CKTC requirements A = Primary High Usage Direct End Office B = Primary High Usage Tandem C = Intermediate High Usage Direct End Office D = Intermediate High Usage Tandem E = Final Direct End Office F = Final Tandem G= Alternate Final Tandem H = Alternate Final End Office

Identifies the trunk group routing. Required when the TGACT field is N, C, D, R, F or K Optional when the TG ACT field is M Otherwise prohibited. When UNE field on ASR Form = Y, trunk group type must indicate final.

12

TSC

Two Six Code

A/N

Conditional

Identifies a code assigned to a trunk group. Required when the TG ACT field is R, F, C, E, D or M. Prohibited when the TG ACT field is not populated. Otherwise optional. Identifies the PON of the ASR associated with this trunk group. Required when the Translation Questionnaire is associated with multiple ASRs. Prohibited when the TG ACT field is E, Z or not populated. Otherwise optional.

13

APON

Associated Purchase Order Number

16

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-57

3.7 TQ - Translation Questionnaire


Field 14 DIR Data Description Directionality Length Type 2 A/N Usage Conditional Valid Entries 1O = One way originating 1T = One way term 2W = Two way 2O = Two way originating 2T = Two way term B = Install ANI and Flex ANI F = Install Flex ANI (where ANI already exists) Y = Install ANI R = Remove Flex ANI S = Remove all ANI X = ANI Requirements reflected in EOD Form

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the directionality and use of the trunk group. Required when the TG ACT field is N. Prohibited when the TG ACT field is E or Z. Otherwise optional. Identifies a request for installation or removal of the automatic number identification feature and/or flexible automatic number identification feature. Optional when the first position of the TQ field on the ASR Form is B or U and the TGTYP field is A, C, E or H and the DIR field is not 1T or 2T. Optional when the first position of the TQ field on the ASR Form is D or T and the DIR field is not 1T or 2T. Optional when the first position of the TQ field on the ASR Form is B or U and the TGTYP field is A, C, E or H and the TG ACT field is C or F and the DIR field is 1T or 2T. Optional when the first position of the TQ field on the ASR Form is D or T and the DIR field is 1T or 2T and the TG ACT field is C or F. Otherwise prohibited. Identifies the requirement for terminating traffic to access directory assistance. Optional when CC field on ASR Form is blank and when the DIR field is 1T, 2T or 2W and the TGTYP field is B, D, F or G. Optional when CC field on ASR Form is blank and the DIR field is 1O or 2O and the TG ACT field is C, F or K and the TGTYP field is B. D, F or G. Otherwise prohibited. Identifies the trunk group hunt sequence from the customer to the provider. Required when the TG ACT field is N and the DIR field is 2W, 2O or 2T. Prohibited when the TG ACT field is E or Z. Otherwise optional.

15

ANI

Automatic Number Identification

Conditional

16

DA ACC

Directory Assistance Access

Conditional

Y = Add DA access to this trunk group R = Remove DA access from this trunk group

17

TK SEQ

Trunk Group Hunt Sequence

Conditional

HL = High to low LH = Low to high LA = Local Arrangement MI = Most idle LI = Least idle CL = Clockwise CC = Counter clockwise

18

TEST ANI

Test Automatic Number Identification Indicator (Translation)

Conditional

Identifies the requirement to furnish the customer with the test ANI number(s). Prohibited when the TG ACT field is E or Z, otherwise optional.

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-58

3.7 TQ - Translation Questionnaire


Field TK SIG Data Description Trunk Signaling Length Type 2 A Usage Conditional Valid Entries TC = Exchange Access Tandem Signaling - CCS TA = Exchange Access Tandem Signaling - MF TS = Traditional Signaling EC = Exchange Access - CCS Signaling EA = Exchange Access - MF Signaling OA = Traditional Operator Service Signaling Inband OB = Traditional Operator Service Signaling - Expanded Inband OC = Traditional Operator Service Signaling - Multi-Wink OD = MOSS Modified Operator Service Signaling Inband OE = MOSS Modified Operator Service Signaling - Expanded Inband OF = MOSS Modified Operator Service Signaling - Multi-Wink OG = EAOSS Exchange Access Operator Service Signaling Inband OH = EAOSS Exchange Access Operator Service Signaling Expanded Inband OI = EAOSS - Exchange Access Operator Service Signaling - Multi-Wink OJ = CCS/SS7 - Operator Service Signaling - Inband OK = CCS/SS7 - Operator Service Signaling Expanded Inband OL = CS/SS7 - Operator Service Signaling - Multi-Wink Y = Route non-conforming SAC traffic to this trunk group R = Remove non-conforming SAC traffic from this trunk group Y = Route Operator Transfer Traffic to this trunk group R = Remove Operator Transfer Traffic from this trunk group

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the originating protocol and signaling of a FGD or local trunk group. An entry of TS is valid only on trunk groups used for 800/900 traffic and is based on provider tariffs/contracts/practices. An entry of TC or TA indicates the requirement for network signaling information necessary to route calls from a provider end office through an access tandem. Entries of TC or TA are prohibited when the entry in the TGTYP field is B, D, F or G. Required when the first position of the TQ field on the ASR Form is D, T, L, M, W or X and the TG ACT field is N or M. Optional when the first position of the TQ field on the ASR Form is D or T and the TG ACT field is D, C, F or K. Otherwise prohibited.

19

20

SAC NON

SAC Non-Conforming

Conditional

Indicates traditional signaling is required for originating SAC traffic from nonconforming end offices to this trunk group. Prohibited when the TG ACT field is E or Z, otherwise optional. Identifies the FGD Trunk Group on which operator transfer traffic will be routed. Prohibited when the first position of the TQ field on the ASR Form is not D or T. Prohibited when the first position of the TQ field on the ASR Form is D or T and the TG ACT field is E or Z. Otherwise optional.

21

O-T

Operator Transfer

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-59

3.7 TQ - Translation Questionnaire


Field OVLP Data Description Overlap Outpulsing Length Type 1 A Usage Conditional Valid Entries Y = Add Overlap Outpulsing to this trunk group R = Remove Overlap Outpulsing from this trunk group

Verizon ASR Business Rules v 27


Notes & Conditions Indicates the requirement for Overlap Outpulsing on FGD. Prohibited when the TKSIG field is EC or OC. Prohibited when the first position of the TQ field on the ASR Form is not D or T. Prohibited when the first position of the TQ field on the ASR Form is D or T and the TG ACT field is E or Z. Otherwise optional. Identifies the FGD trunk group on which Cut-Through traffic will be routed.

22

23

CTO

Cut Through

Conditional

24

OSAC

Other Service Access Code

Conditional

25

NDO

Number of Digits Outpulsed

Conditional

Y = Add Cut-Through traffic to this trunk group Optional when the first position of the TQ field on the ASR Form is D, T or R = Remove Cut-Through traffic from this W and CC field on ASR Form is not populated, otherwise prohibited. trunk group 710 = Federal Government Service Identifies a unique Service Access Code. Access Code Prohibited when the TG ACT field is E or Z. Prohibited when CC field on the ASR Form is populated. Prohibited when the WST field on the ASR Form is populated. Otherwise optional. 0 -10 Identifies the number of digits to be provided to the customer.

26

CSP

Carrier Selection Parameter Calling Party Number

Conditional

Y = Install R = Remove Y = Install R = Remove

Optional for FGB requests when the ACT field on the ASR Form is N or C and the first position of the TQ field on the ASR Form is B or U and the TG ACT field is not E. Optional when the WST field on the ASR Form is populated, the ACT field on the ASR Form is N or C, the first position on the TQ field on the ASR Form is W or X and the TG ACT field is not E. Optional when the CC field on the ASR Form is populated, the ACT field on the ASR Form is N or C, the first position of the TQ field on the ASR Form is L or M and the TG ACT field is not E. Otherwise prohibited. Identifies originating calls placed from a customers presubscribed end user. Optional for FGD CCS trunks when the ACT field on the ASR Form is N or C and the CC field on the ASR is not populated, otherwise prohibited. Identifies a request for the delivery of a ten-digit telephone number of the calling party originating calls within the LATA to a customers location. Optional for CCS trunks when the ACT field on the ASR Form is N or C, otherwise prohibited. Identifies a request for the CIP option which is used to carry the CIC of the carrier in the CCS7 call setup protocol (Initial Address Message) thorough the originating and subsequent networks. Optional for CCS trunks when the CC field on ASR Form is not populated, otherwise prohibited. Identifies the activity associated with the ALT REF field for this trunk group. Required when the ALT REF field is populated, otherwise prohibited.

27

CPN

Conditional

28

CIP

Carrier Identification Parameter

Conditional

Y = Install R = Remove

29

FACT

Feature Activity (ALT REF)

Conditional

A = Add feature R = Remove feature C = Change feature E = Existing/informational

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-60

3.7 TQ - Translation Questionnaire


Field ALT REF Data Description Alternate Routing Trunk Group Reference Length Type 8 A/N Usage Conditional Valid Entries A B C D Valid TSC A = Add Feature R = Remove Feature

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the REF or TSC of an existing trunk group or a new trunk group to which overflow traffic will be routed. Required when the TGTYP field is A, B, C, D or H and the TG ACT field is N, C, F or M, otherwise optional. Identifies the activity associated with the 950-XXXX field entry for this trunk group. Required when the 950-XXXX is populated, otherwise prohibited. Identifies the 950 access number(s) to be used on a FGB or FGD service. Required when the first position of the TQ field on the ASR Form is B or U and the TG ACT field is N. Prohibited when the TG ACT field is E. Prohibited when the first position of the TQ field on the ASR Form is E, L, M W, X or C. Otherwise optional. Indicates whether a customer wants a definable announcement to callers prior to placing them in a queue or connecting them to an available operator or automated operator system. Optional when the TRFTYP field on the Trunking Form is DA, DC, NA, ND or OP, otherwise prohibited. When the UNE field on the ASR form is Y, branding is identified using the Operator Service Translation Questionnaire (OSTQ). Identifies the customers announcement to callers prior to them being placed in a queue or connecting them to an available operator or automated operator system. Required when the first position of the BRAND field is Y or C and the second position of the BRAND field is blank, otherwise prohibited. Identifies a carrier connect wink sent by the access tandem to the CLEC on International Calls originated by the customer. Required when the TRFTYP field on the Trunking Form is AL, AM, TM or TS and the first position of the TQ field on ASR Form is L or W, otherwise prohibited. Identifies the uniform access code associated with the FGD and local service. Required when the first position of the TQ field on the ASR Form is D or T and any TG ACT field is not F, D or K, otherwise optional. Identifies the additional uniform access code(s) associated with the FGD service. Prohibited when the first position of the TQ field on ASR Form is L, M, W or X, otherwise optional. Identifies the classification of the ordering Interexchange customer. Required when the first position of the TQ field on the ASR Form is D or T and any TG ACT field is not F, D or K. Prohibited when the first position of the TQ field on the ASR Form is C, L, M W, or X. Otherwise optional.

30

31

FACT

Feature Activity (950-XXXX) 950 Access Number

Conditional

32

950-XXXX

Conditional

33

BRAND

Branding

Conditional

34

ANNC

Announcement

40

A/N

Conditional

35

CCW

Carrier Connect Wink Validation

Conditional

Y = Access tandem will send carrier connect wink to CLEC N = Access tandem will not send carrier connect wink to CLEC

36

CIC

Carrier Identification Code

Conditional

37

ACIC

Additional Carrier Identification Code Carrier Classification

Conditional

38

CCLASS

Conditional

IC = Interexchange Customer (domestic) IN = International Carrier CC = Consolidated Carrier (domestic and international

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-61

3.7 TQ - Translation Questionnaire


Field INTRA Data Description Intrastate IntraLATA Traffic Length Type 1 A Usage Conditional Valid Entries Y = Yes authorized, route traffic N = Do not route traffic

Verizon ASR Business Rules v 27


Notes & Conditions Indicates whether the customer is authorized by the appropriate state regulatory authority to carry Intrastate IntraLATA traffic. Required when any TG ACT field is N, C or R and CC and/or WST field on the ASR Form is not populated. Optional when any TG ACT field is K. Otherwise prohibited. Indicates the customer is authorized by the appropriate state regulatory authority to carry Intrastate InterLATA traffic. Required when any TG ACT field is N, C or R and CC and or WST field on the ASR Form is not populated. Optional when any TG ACT field is K. Otherwise prohibited. Identifies the customer as a participant in Coin Equal Access in the end offices(s) or access tandem affected by this request. Required when the first position of the TQ field on the ASR Form is D or T and any TG ACT field is not F, D or K. Prohibited when the first position of the TQ field on ASR Form is C, L, M, W or X. Otherwise optional. Identifies a request for the ATP option which is used to carry information transmitted from an ISDN user through the CCS network. Optional for CCS trunks, otherwise prohibited. Identifies the REF or TSC of the trunk group carrying traffic with a bearer capability indicating 3.1 KHZ. Required when exception routing by 3.1 KHZ bearer capability is ordered or changed, otherwise prohibited. Identifies the REF or TSC of the trunk group carrying traffic with a bearer capability indicating 56 KB. Required when exception routing by 56 KB bearer capability is ordered or changed, otherwise prohibited. Identifies the REF or TSC of the trunk group carrying traffic with a bearer capability indicating 64 KB. Required when exception routing by 64 KB bearer capability is ordered or changed, otherwise prohibited.

39

40

INTER

Intrastate InterLATA Traffic

Conditional

Y = Yes authorized, route traffic N = Do not route traffic

41

COIN EA

Coin Equal Access

Conditional

Y = Yes N = No

42

ATP

Access Transport Parameter Bearer Capability Routing 3.1 KHZ

Conditional

Y = Install R = Remove A through D Valid TSC

43

BCR3

A/N

Conditional

44

BCR5

Bearer Capability Routing 56 KB

A/N

Conditional

A through D Valid TSC

45

BCR6

Bearer Capability Routing 64 KB

A/N

Conditional

A through D Valid TSC

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-62

3.7 TQ - Translation Questionnaire


Field 46 M64 Data Description Multiple 64 Clear Channel Capability Length Type 2 A/N Usage Conditional Valid Entries 1st position 1 = HO - 384 Kbps call 2 = H11 - 1536 Kbps call 3 = Multirate - multiples of 64 Kbps 4 = Multirate H11 5 = Multirate Floating 6 = Multirate Flexible 7 = Multirate H0 2nd position B = Best Fit F = First Fit A = Customer B = Provider C = CIC Option ALL, 00, 01, 06, 07, 20, 27, 29, 52, 61, 70, 93 ALL, 1+, 0+, 00, 011, 01, 1+700, 0+700, 800, 1+900, 0+900, 1+500, 0+500, 0-L, 411, LPDA, 0+L.

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the allocation scheme and trunk selection option when multiple 64 clear channel capability is ordered. Required when ordering multiple 64 clear channel capability, otherwise prohibited.

47 48 48a. 48b. 49 49a. 49b. 49c. 50

GLARE

Glare Master Routing Matrix Automatic Number Identification Digits Routing Service Prefix Routing Exception Matrix

Conditional

Identifies the glare master. Required when the TK SEQ field is populated, otherwise prohibited. Identifies the routing requirements by ANI Information Digits and service prefix.

ANID SVCPRE

3 5

A/N A/N

Conditional Conditional

Identifies the exceptions by Line Class of Service to the routing requirements listed in the Routing Matrix. 2 15 5 124 N A/N A/N A/N Conditional Conditional Conditional Conditional ALL, 00, , 01, 06, 07, 20, 27, 29, 52, 61, 70, 93

ANIDEXCP LCS SVCPREREM REMARKS

Automatic Number Identification Digits Routing Exception Line Class/Service Service Prefix Remarks

ALL, 1+, 0+, 00, 011, 01, 1+500, 0+500, 1+700, 0+700, 800, 1+900, 0+900, 0-L, 411, LPDA, 0+L Identifies a free flowing field which can be used to expand upon and clarify other data on this form. Required in MA, ME, NH, NY, RI & VT when 1st position TQ on ASR = L and ordering new trunk group associated with UNE dedicated trunk port. Remarks must indicate unbundled switch Line Class Code (LCC) or Line Treatment Group (LTG) and originating NPA / NXX associated with LCC/LTG. If field is not populated, a normal dialing plan will be provided. The SAC NXX CODE ACTIVITY section is completed for SAC or NXX activation or deactivations only. A combination of SAC activations on the same TQ is based on provider tariff/practices. Required when the first position of the TQ field on the ASR Form is S, U or T, otherwise prohibited.

51

CIC

Carrier Identification Code

Conditional

Type 950-XXXX = 10XXX = 101XXXX =

Entry XXXX XXX XXXX

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-63

3.7 TQ - Translation Questionnaire


Field ORD LEV Data Description Ordering Level Length Type 12 A/N Usage Required Valid Entries Position 1 A = State/Province Level B = LATA Level C =Tandem Level D = End Office Level Position 2-12 Valid 2 character State/Prov postal code Valid 3 character LATA designation Valid 11 character CLLI code Y = Yes N = No

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the scope of the required code activity. Required when the first position of the TQ field on the ASR Form is S, U or T, otherwise prohibited.

52

53

00Y

00Y Code Option

Conditional

Indicates the customers capability of accepting an 00Y code for identification of cross boundary tributary SAC traffic. Required when the first position of the SAC ACT field is Y. Required when the first position of the SAC ACT field is N and the provider provides the 00Y code option. Optional when the first position of the SAC ACT field is A or R. Otherwise prohibited. Identifies the requirement to furnish the customer with the test ANI number. Optional when the TEST TN field is populated, otherwise prohibited. Identifies the employee or office of the customer or agent that should be contacted on technical matters regarding this TQ. Required when the first position of the TQ field on the ASR Form is S. Optional when the first position of the TQ field on the ASR Form is U or T. Otherwise prohibited. Identifies the telephone number of the customer Technical Contact. Required when the TECH CON (SAC) field is populated, otherwise prohibited.

54 55

TEST ANI TECH CON

Test Automatic Number Identification Indicator(SAC) Customer Technical Contact (SAC)

1 15

A A/N

Conditional Conditional

Y= Yes N = No

56 57

TEL NO SAC ACT

Technical Contact Telephone Number (SAC) Service Access Code Activity

15 2

N A/N

Conditional Conditional 1st Position A = Add (NXX Code Activation) D = Discontinue SAC Service K = Cancel Pending Activity N = Establish SAC Service R = Remove (NXX Code Deactivation) Y = Change 00Y Option Only 2nd Position 1st numeric of SAC

Identifies the activity taking place for SAC NXX services. Required when the first position of the TQ field on the ASR Form is S, U or T, otherwise prohibited.

58

APON

Associated Purchase Order Number

16

A/N

Conditional

Identifies the PON of the ASR associated with this activity. Required when Translation Questionnaire is associated with multiple ASRs. Prohibited when SAC ACT is not populated. Otherwise optional. Identifies the last four digits of the test telephone number to be used by the provider. Required when the first position of the SAC ACT field is A or N. Optional when the first position of the SACACT field is Y or K. Otherwise prohibited.

59

TEST TN

Test Telephone Number

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-64

3.7 TQ - Translation Questionnaire


Field NXX Data Description NXX Information Length 3 Type N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the NXX codes affected by this translation questionnaire. Required when the first position of the SAC ACT field is N, A, R or D. Optional when the first position of the SAC ACT field is K. Otherwise prohibited. Identifies the expected announcement response when reaching the customer test number. Required when the TEST TN field is populated, otherwise prohibited. Identifies a free flowing field which can be used to expand upon and clarify other data on this form. Identifies a single number used to uniquely identify a switch that has ported numbers, is used to route a call to the switch and applies to all NPA/NXX/X associated with this request. This LRN applies to all NPA/NXX/X associated with this request. Optional when the ACT field on the ASR Form is N, the DIR field is 1O, 2W, or 2O,the C.NPA/NXX field is populated and the LRN field is blank. Optional when the ACT field on the ASR Form is C, the C.NPA/NXX field is populated and the LRN field is blank and first position of REQTYP field on the AsR Form is M. Otherwise prohibited Identifies the employee or office of the customer or agent that should be contacted on technical matters regarding this TQ. Required when the first position of the TQ field on the ASR Form is "C". Optional when the first position of the TQ field on the ASR Form is "M" or "X". Otherwise prohibited. Identifies the telephone number of the customer technical contact. Required when the TECH CON (NPANXX/X) field is populated, otherwise prohibited.

60

61

TEST RESPONSE REMARKS LRN G

Test Response

62

A/N

Conditional

62 63

Remarks (SAC) Location Routing Number Global

124 10

A/N N

Optional Conditional Positions 1 - 3 = NPA Positions 4 - 6 = NXX Positions 7 10 = Any four digit numeric assigned by the customer

64

TECH CON

Customer Technical Contact (NPANXX/X)

15

A/N

Conditional

65

TEL NO

Technical Contact Telephone Number (NPANXX/X)

15

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-65

3.7 TQ - Translation Questionnaire


Field C.NPA/NXX Data Description Local Exchange Customer NPA/NXX Length Type 7 N Usage Conditional Valid Entries NPA/NXX = 10000 Block NPA/NXX/X = 1000 Block

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the NPA/NXX or NPA/NXX/X blocks that resides in the customers switch/node for the local exchange service being provided. For screening of incoming traffic to VZ: Identifies the NPA-NXX codes that reside in a CLEC switch node for the purpose of establishing incoming screening at a VZ TOPS switch when the CLEC has ordered OS/DA service from VZ. This field will indicate that only calls originating from the NPA-NXX's that reside in the CLEC switch should be allowed to complete through the VZ TOPS switch. For routing of traffic originating from an unbundled VZ switch: Identifies the local NPA/NXX codes to be routed to the trunk group requested on dedicated trunk port(s). Required when the first position of the TQ field on the ASR Form is C, M or X. Required when the first position of TQ field orn the ASR Form is E, the first position of the REQTYP field on the ASR Form is L, the AT field on the ASR Form is C and the PCU field on the Trunking Form is 1, 3, 5, 7, B, C, or D. Required when the UNE field on the ASR Form is populated and the TRFTYP field on the Trunking Form is DA, DC or OP. Required when ordering new trunk groups or changing routing adding local NPA/NXX codes to existing trunk groups associated with UNE dedicated trunk ports or EDTP Type 1* or EDTP Type 2* and the TRFTYP field on the Trunking Form is LL. Otherwise prohibited. * where available Identifies a number used to uniquely identify a switch that has ported numbers and is used to route a call to the switch. Optional when the ACT field on the ASR Form is N, the DIR field is 1O, 2W, or 2O, the C.NPA/NXX field is populated and the LRN G field is blank. Optional when the ACT field on the ASR Form is C, the C.NPA/NXX field is populated and the LRN G field is blank and first position of REQTYP field is M. Otherwise prohibited.

66

67

LRN

Location Routing Number

10

Conditional

Positions 1 - 3 = NPA Positions 4 - 6 = NXX Positions 7 10 = Any four digit numeric assigned by the customer

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-66

3.8 C/NR - Clarification / Notification Form

Verizon ASR Business Rules v 27

3.8 C/NR - Clarification / Notification Request Form


Used by Verizon to request clarification and/or provide information regarding the customers request.

C/NR Form Specific Data


1. 2. 3. Field CCNA PON VER Data Description Customer Carrier Name Abbreviation Purchase Order Number Version Identification Length 3 16 2 Type A A/N A/N Usage Required Required Conditional Valid Entries Notes & Conditions IAC Code Identifies the COMMON LANGUAGE IAC code for the customer submitting the ZZZ = Casual customer or end user billing ASR and receiving the Clarification / Notification Request Form. The CCNA field entry must be identical to the CCNA field entry on the ASR Form. Identifies the customers unique purchase order or requisition number that authorizes the issuance of the request or supplement. The PON field entry must be identical to the PON field entry on the ASR Form. Identifies the customer version number. The VER field entry must be identical to the VER field entry on the ASR Form. Required when the VER field on the ASR Form is populated, otherwise prohibited. Identifies the number that may be generated by the provider mechanized systems, pre-assigned to the customer by the provider, or manually assigned by the provider to identify a customers request for service. The ASR NO field entry must be identical to the ASR NO field entry on the ASR Form. Identifies the provider service center requesting clarification or providing notification. The ICSC field entry must be identical to the ICSC field entry on the ASR Form. Identifies the date and time that the Clarification/Notification Request Form is sent by the provider. Identifies the initiator as specified on the ASR Form by the customer. The INIT field entry must be identical to the INIT field entry on the ASR Form. Required when the INIT field on the ASR Form is populated, otherwise prohibited. Identifies the telephone number of the initiator as specified on the ASR Form by the customer. The TEL NO field entry must be identical to the TEL NO (INIT) field entry on the ASR Form. Required when the INIT field is populated, otherwise prohibited Identifies the provider employee handling this service request. Identifies the telephone number of the provider employee handling this request. Identifies the electronic mail address of the provider rep (AP REP) contact.

4.

ASR NO

Access Service Request Number

18

A/N

Optional

5. 6. 7.

ICSC D/TSENT INIT

Interexchange Customer Service Center Clarification/Notification Date and Time Sent Initiator

4 17 15

A/N A/N A/N

Required Required Conditional U.S Standard Metric Format

8.

TEL NO

Telephone Number

15

Conditional

9. 10. 11.

AP REP AP REP TEL AP REP EMAIL

Provider Contact Provider Contact Telephone Number Provider Contact Electronic Mail Address

15 15 60

A/N N A/N

Required Required Optional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-67

3.8 C/NR - Clarification / Notification Form


Field 12. CNT Data Description Clarification/Notification Type Length 1 Type A Usage Required Valid Entries A = ASR (PON) Completion B = Jeopardy C = Previous C/NR Clear D = Remarks E = Errors F = Jeopardy with errors K = Provider Initiated Cancellation

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the type of clarification/notification being sent to the customer. An entry of A indicates the ASR (PON) has been marked as completed by the provider, service has been activated and billing may commence. An entry of B indicates the ASR (PON) has a condition which impacts the critical date(s). The use of B is only applicable after the ASR has been confirmed. An entry of C indicates that all the conditions that would have required clarification from the customer have been satisfied. This could have occurred as the result of a SUP being received or through verbal negotiations between the customer and provider that determined a SUP is not required. The use of C is only applicable after a previous C/NR has been confirmed. An entry of D indicates that the C/NR is informational only and no response is required. An entry of E indicates that one or more ERROR TAG fields are populated on the C/NR. An entry of F indicates the combination of B and E conditions. An entry of K indicates the ASR has been cancelled by the provider due to no response to a previously issued C/NR. Identifies the providers C/NR version number. The initial C/NR VER for an ASR (PON) will be 01 and increments as subsequent C/NRs are generated. Identifies that the provider expects a supplement ASR in response to this C/NR. Required when one or more SUPI fields are populated, otherwise prohibited. Identifies the date on which the provider expects a response from the customer regarding the Clarification/Notification Request. Required when the SUPR field is populated, otherwise optional. Identifies the date on which the ASR (PON) was completed by the provider, service was activated and billing may commence. Required when the CNT field is A, otherwise prohibited. Identifies that the provider expects a supplement ASR to correct the condition identified at the line level on the C/NR. If this field is blank, the clarification/notification for this line item is information only. Optional when the CNT field is B, E or F, otherwise prohibited.

13. 14. 15.

C/NR VER SUPR CRDD

Clarification/Notification Version SUP Requested Customer Response Due Date Completion Date

2 1 10

N A A/N

Required Conditional Conditional

01 - 99 Y = Yes U.S. Standard Metric Format U.S. Standard Metric Format Y = Yes

16

CD

10

A/N

Conditional

17.

SUPI

SUP Indicator

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-68

3.8 C/NR - Clarification / Notification Form


Field RCODE Data Description Reason Code Length 2 Type A/N Usage Conditional Valid Entries 1A = Inter Office Facility Shortage 1B = Scheduling/Work Load 1C = Customer Not Ready 1D = No loop available 1E = End User Not Ready 1F = Provider Missed Appointment 1G = No Access to End User Premises 1H = Central Office Freeze 1J = Special Construction 1K = Natural Disaster (Flood, etc.) 1L = Frame Due Time Cannot be Met 1M = Due Date Cannot Be Met 1N = Due Date and Frame Due Time Cannot be Met 1P = Other 1Q = Assignment Problem 1R = Customer Could Not Be Reached 1S = Building Not Ready, Customer Will Advise 1T = Pole At Site Not Set 1W = Entrance Facilities Required 1X = Not Technically Feasible 1Y = No Central Office Equipment Available 1Z = Other Exchange Company Not Ready

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the reason the provider has placed this service request in jeopardy. This indicates the ASR (PON) has a condition that impacts the critical date(s) and is only applicable after the ASR has been confirmed.

18.

19.

RDET

Reason Code Detail

60

A/N

Conditional

Provides a detail description associated with the reason code. Required when the RCODE field is 1P. Optional when the RCODE field is populated with a value other than 1P. Otherwise prohibited. Identifies a free flowing field that can be used to send a detailed message to the customer or to expand upon and clarify other data on the C/NR Form. This field should not be used in lieu of any existing error process. The field will be limited to one per ASR transmission. The entire ASR should be reviewed to ensure that all discrepancies have been included on the request. Identifies the unique number assigned to a specific circuit or circuit segment for which an error has been identified. Required when the VC NUM field is blank and the associated ERROR TAG field is populated, otherwise prohibited. Identifies the unique number assigned to a specific virtual circuit for which an error has been identified. Required when the REF NUM field is blank and the associated ERROR TAG field is populated, otherwise prohibited.

20.

REMARKS

Remarks

225

A/N

Optional

21.

REF NUM

Reference Number

Conditional

22.

VC NUM

Virtual Connection Number

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-69

3.8 C/NR - Clarification / Notification Form


Field ERROR TAG Data Description Error Tag Length 12 Type A/N Usage Conditional Valid Entries SVC-ADDR = Service Address ASOG Data Element Unique Error Code

Verizon ASR Business Rules v 27


Notes & Conditions Identifies a specific field or unique identification scheme for the error message provided in the ERROR MESSAGE field. The valid entry SVC-ADDR indicates one or more data elements associated with the service address on the SALI Form is in error. In lieu of SVC-ADDR, the specific ASOG data element may be used (e.g., CITY) as stated in Note 2 the following note. Identifies the name of the field (e.g., NCI) in error as shown in the ASOG. Identifies an error condition that cannot be mapped to a specific ASOG data element. Required when the CNT field is E or F, otherwise prohibited. Provides a descriptive text of an error condition identified by the provider. Required if the ERROR TAG field is populated, otherwise prohibited.

23.

24.

ERROR MESSAGE

Error Message

120

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-70

3.9 CN - Confirmation Notice Form

Verizon ASR Business Rules v 27

3.9 CN - Confirmation Notice Form


The confirmation notice indicates that Verizon has received a complete Access Service Request and has issued a service order to provide service as ordered.

CN Form Specific Data


1. 2. 3. Field CCNA PON VER Data Description Customer Carrier Name Abbreviation Purchase Order Number Version Identification Length 3 16 2 Type A A/N A/N Usage Required Required Conditional Valid Entries Notes & Conditions IAC Code Identifies the COMMON LANGUAGE IAC code for the customer submitting the ZZZ = Casual customer or end user billing ASR and receiving the Confirmation Notice Form (CN). The CCNA field entry must be identical to the CCNA field entry on the ASR Form. Identifies the customers unique purchase order or requisition number that authorizes the issuance of the request or supplement. The PON field entry must be identical to the PON field entry on the ASR Form. Identifies the customers version number. The VER field entry must be identical to the VER field entry on the ASR Form. Required when the VER field on the ASR Form is populated, otherwise prohibited. Identifies the number that may be generated by the provider mechanized systems, pre-assigned to the customer by the provider, or manually assigned by the provider to identify a customers request for service. The ASR NO field entry must be identical to the ASR NO field entry on the ASR Form. Required when ASR NO is pre-assigned. Required on all supplements when PON is not unique. Otherwise optional. An indicator used to identify an order being sampled for quality control purposes. Identifies the type of response issued by the provider.

4.

ASR NO

Access Service Request Number

18

A/N

Conditional

5. 6.

SPA RT

Special Action Indicator Response Type

2 1

A/N A

Optional Required

B = Billing Account Number Correction D = Design and Order Confirmation F = Form Order Confirmation S = Service Request Confirmation

7. 8. 9. 10. 11. 12. 13.

INIT ICSC CD/TSENT AP REP AP REP TEL EMAIL AP DSGCON TEL

Initiator Interexchange Customer Service Center Confirmation Date and Time Sent Provider Contact Provider Contact Telephone Number Electronic Mail Address Provider design Contact Telephone Number

15 4 17 15 15 60 15

A/N A/N A/N A/N N A/N A/N

Required Required Required Required Required Optional Conditional U.S Standard Metric Format

Identifies the initiator as specified on the ASR Form by the customer. Identifies the provider service center requesting clarification or providing notification. Identifies the date and time that the CN is sent by the provider/ASC/EC. Identifies the provider employee handling this request. Identifies the telephone number of the provider employee handling this request. Identifies the electronic mail address of the provider rep (AP REP) contact. Identifies the telephone number of the provider employee, office or agent that should be contacted on design/engineering matters. Required when the RT field is D and this entry is different from the AP REP TEL field, otherwise prohibited.

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-71

3.9 CN - Confirmation Notice Form


Field APF DSGCON TEL Data Description Provider Facility Design Contact Telephone Number Provider Operations Control Office Provider Facility Operations Control Office Length 15 Type A/N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the telephone number of the provider employee, office or agent that should be contacted on design/engineering matters for switched access facilities. Required when the RT field is D, any FCKT field is populated and the entry is different from the Provider DSGCON TEL field, otherwise prohibited. Identifies the telephone number of the provider office for installation coordination at time of DOC issuance for the facility. Required when the RT field is D, otherwise prohibited. Identifies the telephone number of the provider office for installation coordination at time of DOC issuance for switched access facilities. Required when the RT field is D and any FCKT field is populated, otherwise prohibited. Identifies the telephone number of the provider office for maintenance trouble reporting at time of DOC issuance. Required when the RT field is D and the information in this field is different from the AP OCO field, otherwise prohibited. Indicates a provider initiated confirmation that is not in response to a customer Access Service Request supplement. This may signal to the customer that additional investigation is needed to determine internal process impacts. Identifies the telephone number of the provider office for maintenance trouble reporting at time of DOC issuance. Required when the RT field is D, any FCKT field is populated and the information is different from the APF OCO field, otherwise prohibited. Identifies the number of work days which could be required to complete this request (contingent upon facility and work force availability) if this request were a firm order as of today's date. Required when the ACT field on the ASR Form is N, C, D, M or T, the RT field is S and the second position of the TQ field on the ASR Form is not N or X. Prohibited when the second position of the TQ field on the ASR Form is N. Prohibited when the RT field is D. Otherwise optional. Identifies the project number associated with this request. Use of this field includes: relating multiple ASR's, previously negotiated orders, etc. The provider may initiate the project identification and provide this to the customer who will populate the field when submitting additional and/or supplement ASR Forms associated with this project. Prohibited when RT field is B, otherwise optional. Identifies the quotation tracking number assigned by the provider in response to a provisioning arrangement inquiry, e.g., diversity.

14.

15.

AP OCO

15

A/N

Conditional

16.

APF OCO

15

A/N

Conditional

17.

AP MCO

Provider Maintenance Control Office

15

A/N

Conditional

18

PIA

Provider Initiated Activity

Optional

1 = Provider Initiated ECCKT(s) Change 2 = Provider Initiated Due Date Change 3 = ECCKT and Due Date Change 4 = Other (Clarify in Remarks)

19.

APF MCO

Provider Facility Maintenance Control Office Provisioning Interval

15

A/N

Conditional

20.

PROVINT

Conditional

21.

PROJECT

Project Identification

16

A/N

Conditional

22.

CNO

Case Number

12

A/N

Optional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-72

3.9 CN - Confirmation Notice Form


Field 23. APP Data Description Application Date Length 10 Type A/N Usage Conditional Valid Entries U.S. Standard Metric Format

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the date that the customer gives the provider an Access Service Request with sufficient information to allow a service order to be issued. Prohibited when the RT field is B or S. Optional when the RT field is F and the second position of the TQ field on the ASR Form is N or X. Otherwise required. Identifies the date the Design Layout Report (DLR) is to be forwarded to the customer. Required when the RT field is F, the ACT field on the ASR Form is N, C, D, M or T, the first position of the REQTYP field on the ASR Form is not Q, the second position of the TQ field on the ASR Form is not N or X and the RTR field on the ASR Form is S or 1-10. Prohibited when the RT field is B, D or S. Prohibited when the ACT field on the ASR Form is R. Prohibited when the second position of the TQ field on the ASR Form is N or X. Otherwise optional. Identifies the date that the Confirming Design Layout Report (CDLR) is to be received at the provider design control office. Required when the RT field is F, the ACT field on the ASR Form is N, C, D, M or T, the first position of the REQTYP field on the ASR Form is not Q, the second position of the TQ field on the ASR Form is not N or X and the RTR field on the ASR Form is 1-10. Prohibited when the RT field is B, D or S. Prohibited when the ACT field on the ASR Form is R. Prohibited when the second position of the TQ field on the ASR Form is N or X. Otherwise optional. Identifies the date the provider schedules the overall testing of the requested service to start. When this field is populated and the PPTD field on the ASR Form is populated, those entries must be the same. Required when the PPTD field on the ASR Form is populated. Prohibited when the RT field is B or S. Otherwise optional. Identifies the date the service order generated from this Access Service Request is due to be completed. Prohibited when the RT field is B or S. Optional when the RT field is F and the second position of the TQ field on the ASR Form is N or X. Otherwise required.

24.

DLRD

Design Layout Report Date

10

A/N

Conditional

U.S. Standard Metric Format

25.

CDLRD

Confirming Design Layout Report Date

10

A/N

Conditional

U.S. Standard Metric Format

26.

PTD

Plant Test Date

10

A/N

Conditional

U.S. Standard Metric Format

27.

DD

Due Date

10

A/N

Conditional

U.S. Standard Metric Format

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-73

3.9 CN - Confirmation Notice Form


Field 28. EBD Data Description Effective Bill Date Length 10 Type A/N Usage Conditional Valid Entries U.S. Standard Metric Format

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the date billing is to cease for disconnect activity whenever the billing date is different from the due date. Required when the RT field is F, the ACT field on the ASR Form is D, the first position of the REQTYP field on the ASR Form is not Q and the EBD field is different than the DD field. Prohibited when the RT field is B or S.

29.

BAN

Billing Account Number

12

A/N

Conditional

Valid Billing Account Number NB = Multi-EC Non-billing Provider

Otherwise optional. Identifies the billing account to which the recurring and non-recurring charges for this request will be billed. Required when the ACT field on the ASR Form is N, C, D, M or T and the RT field is D or F, otherwise optional. Identifies the CLLI Code of the local or alternate serving central office of the customer location or primary location. Required when the RT field is D or F, the ACT field on the ASR Form is N or T, the first position of the REQTYP field on the ASR Form is not Q and the second position of the TQ field on the ASR Form is not N or X. Optional when the first position of the REQTYP field on the ASR Form is W. Prohibited when the RT field is B. Prohibited when the second position of the TQ field on the ASR Form is N or X. Prohibited when the UNE field on the ASR Form is populated. Otherwise optional. Indicates that special construction is required to fill the request. Prohibited when the the RT field is B, otherwise optional. Identifies the CLLI Code of the customers facility terminal location for the DS1 facility being ordered. Required when the RT field is D and the FACTL field on the Trunking Form is populated, otherwise prohibited. Identifies the network channel code for the T1 transport involved. The network channel code describes the channel provided by the provider from the customer's ACTL to a provider central office. Required when the RT field is D and the NC1 field on the FGA or Trunking Form is populated, otherwise prohibited. Identifies the network channel code for the circuit involved. Required when the RT field is D, otherwise prohibited. Identifies the electrical conditions on the circuit at the ACTL. Required when the RT field is D, otherwise prohibited. Identifies the provider's version. For corrections and SUPs, the entry will increment. For resends, the entry will not increment.

30.

SWC

Serving Wire Center

11

A/N

Conditional

31. 32.

SC FACTL

Special Construction Facility Access Customer Terminal Location

1 11

A A/N

Conditional Conditional

Y = Required

33.

NC1

Network Channel Code (T1)

A/N

Conditional

NC Code

34. 35. 36.

NC NCI EC VER

Network Channel Code Network Channel Interface Code Exchange Carrier Version

4 5 - 12 2

A/N A/N N

Conditional Conditional Required

NC Code NCI Code

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-74

3.9 CN - Confirmation Notice Form


Field SECLOC Data Description Secondary Location Length 11 Type A.N Usage Conditional Valid Entries CLLI Code

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the terminating end of the circuit, a provider end office or the first point of switching for the circuit being provided. Required when the first position of the REQTYP field on the ASR Form is V or X and the CLLI Code has been assigned by the provider, otherwise prohibited. Identifies the date that the trunk facility DLR is to be forwarded to the customer for the digital interface(s) identified in the FCKT field. Required when the ACT field on the ASR Form is N, the FCKT field is populated and the RT field is F. Prohibited when the RT field is B, D or S.

37.

38.

FDLRD

Facility Design Layout Report Date

10

A/N

Conditional

U.S. Standard Metric Format

39.

FCDLRD

Facility Confirming Design Layout Report Date

10

A/N

Conditional

U.S. Standard Metric Format

Otherwise optional. Identifies the date that the Confirming Design Layout Report (CDLR) is to be received at the provider design control office for the trunk facility. Required when the ACT field on the ASR Form is N, the FCKT field is populated and the RT field is F and the customer has requested a CDLR.. Prohibited when the RT field is B, D or S. Otherwise optional. Identifies the date the provider schedules the overall testing of the trunk facility. Required when the ACT field on the ASR Form is N, the FCKT field is populated and the RT field is D or F. Required when the PFPTD field on the ASR Form is populated. Prohibited when the RT field is B or S. Otherwise optional. Identifies the due date of the digital interface(s) identified in the FCKT field. Required when the FCKT field is populated, otherwise prohibited. Identifies the Billing Account Number for charges associated with inside wire. Required when a correction to the IWBAN Field on the ASR Form is needed, otherwise prohibited. Identifies the provider's signaling point in a CCS network. Required when the first position of the REQTYP field on the ASR Form is L. Required for CCS trunk requests when the second position of the TQ field on the ASR Form is not N or X. Otherwise prohibited. Identifies all services associated with a particular fiber based network. Required when the FNI field on the ASR Form is N, otherwise optional.

40.

FPTD

Facility Plant Test Date

10

A/N

Conditional

U.S. Standard Metric Format

41. 42.

FDD CIWBAN

Facility Due Date Corrected Inside Wire Billing Account Number Exchange Company Signaling Point Code

10 16

A/N A/N

Conditional Conditional

U.S. Standard Metric Format

43.

ECSPC

11

A/N

Conditional

44.

FNI

Fiber Network Identification Route Index

13

A/N

Conditional

Valid FNI

45

RTI

A/N

Conditional

Identifies the routing index to be used by the providers switching equipment to forward/port the providers telephone number to the customers non-RCF trunk group. Required when the TRFTYP field on the Trunking Form is RI or PN, otherwise prohibited.

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-75

3.9 CN - Confirmation Notice Form


Field TNSC REMARKS ECCKT Data Description Transit Network Signaling Code Remarks Exchange Company Circuit ID Length 2 124 53 Type N A/N A/N Usage Optional Optional Conditional COMMON LANGUAGE Special Service Circuit Codes (CLCI S/S Codes) Telephone Number Format. COMMON LANGUAGE Special Service Circuit Codes (CLCI S/S Codes) - Serial Number Format. COMMON LANGUAGE Message Trunk Circuit Codes (CLCI MSG Codes) COMMON LANGUAGE Facility Codes (CLFI Codes) Valid Entries

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the OZZ/CKTC code that is assigned to trunk groups from a provider tandem to an ACTL. Identifies a free flowing field which can be used to expand upon and clarify other data on this form. Identifies a provider circuit ID or multiple circuit IDs. The provider assigning this circuit identifier determines the content of this field in accordance with COMMON LANGUAGE standards maintained by Telcordia Technologies. When the UNE field on the ASR form is populated, and the customer is ordering an unbundled multiplexer, the COMMON LANGUAGE Format of the transport facility for the high speed and low speed sides may be different. When a component within the format is purposely omitted, the component should still be delimited and compressed to eliminate any spaces. All components within the ECCKT should be delimited by either virgules or periods. If all positions in a component within the ECCKT are not populated, the component should be compressed to eliminate any spaces. The format and structure of the field is defined by ANSI standards. Required when the RT field is D or F, the ACT field on the ASR Form is N, C, D, M or T, the first position of the TQ field on the ASR Form is not S Prohibited when the RT field is B Otherwise optional. Identifies non-hunt telephone numbers in ESS multi-line groups. Only valid for FGA and WAL service. Required when the RT field is D or F, the ACT field on the ASR Form is N or C, the first position of the REQTYP field on the ASR Form is A or W, and the NHNI field on the FGA or WAL Form is populated. Prohibited when the RT field is B. Otherwise optional. This field is used to identify a circuit or circuits segment on a request for multiple circuits. REF NUM may be used by the customer and the provider for control and tracking purposes during the provisioning process. For each circuit segment the REF NUM must be unique beginning with 0001 and incrementing by one for each additional circuit segment. Required when the RT field is D or F, the first position of the REQTYP field on the ASR Form is not Q and the second position of the TQ field on the ASR Form is not N or X. Prohibited when the RT field is B. Otherwise optional.

46 47 48.

49.

NHN

Non-Hunting Number

Conditional

50

REF NUM

Reference Number

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-76

3.9 CN - Confirmation Notice Form


Field FCKT Data Description Facility Circuit Identification Length 53 Type A/N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the Facility ID which has been assigned to the digital interface being designed to accommodate the request for switched access lines or trunks. The format of this field is defined COMMON LANGUAGE standards. Required when the NC1 field on the FGA or Trunking Form is populated, and the RT field is D or F. Prohibited when the first position of the LTP field on the ASR Form is A, G, H, I, J or K. Prohibited when the LTP field on the ASR Form is not populated. Prohibited when the RT field is B. Otherwise optional. Identifies the billing account to which the recurring and non-recurring charges for the original High Capacity channel are billed. Required when the HBAN is different than the HBAN provided on the request or is not populated with E, and the ASC-EC field on the ASR Form is blank. Optional when the ASC-EC field on the ASR Form is populated and the UNE field on the ASR Form is not populated. Otherwise prohibited. Identifies that the request was provided in an on-net or off-net configuration.

51

52

HBAN

High Capacity Channel Billing Account Number

12

A/N

Conditional

Valid Billing Account Number NB = Multi-EC Non-billing provider

53

NK

Network Configuration

Optional

54 55 56

MPA CKR CKR1

Multiple Provider Arrangement Customer Circuit Reference Customer Circuit Reference (T1)

1 53 53

A A/N A/N

Optional Conditional Conditional

A = On-net configuration B = Off-net configuration C = On-net SECLOC/On-net SWC (Single) D = On-net SECLOC/On-net SWC (Diverse Y = Yes

Identifies when the provider utilizes another providers facilities to support the overall customer request in a non-meetpoint environment. Identifies the circuit number or range of circuit numbers being used by the customer. Required when the CKR field on the ASR Form is populated, otherwise prohibited. Identifies the circuit number or range of circuit numbers used by the customer for the T1 Transport involved. Required when the CKR1 field on the FGA Form or Trunking and ACI Forms are populated, otherwise prohibited. Identifies the number assigned by the customer to this leg (segment) of a multipoint circuit. Required when the LEGNUM field on the MSL Form is populated and the RT field is not B, otherwise prohibited. Identifies a specific customer trunk number or trunk number range. Required when the RT field is D or F and the TRN field on the Trunking and/or ACI Form is populated, otherwise prohibited. Identifies a specific trunk for which CCS is being performed as assigned by the customer. Required when the RT field is D or F and the TCIC field on the Trunking and/or ACI Form is populated, otherwise prohibited.

57

LEGNUM

Multipoint Leg Number

A/N

Conditional

58

TRN

Trunk Number

A/N

Conditional

0-9999

59

TCIC

Trunk Circuit Identification Code

11

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-77

3.9 CN - Confirmation Notice Form


Field 60 ORD Data Description Order Number Length 17 Type A/N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the provider service order number for the requested service. Required when the RT field is D or F. Prohibited when the RT field is B. Otherwise optional Identifies the provider service order number for the trunk facility. Required when the ACT field on the ASR Form is N or D, the FCKT field is populated and the RT field is D or F. Prohibited when the RT field is B or S. Otherwise optional. Identifies the related provider order number or range of order numbers to be completed on the same date as the Access Service Request due date. Prohibited when the RT field is B, otherwise optional. Identifies the access service group assigned to a particular circuit or group of circuits. This number appears on the Customer Service Record (the billing service charge details) which is forwarded to the customer. Identifies the CLLI Code of the local or alternate serving central office for the secondary location. Required when the RT field is D or F, the ACT field on the ASR Form is N. Prohibited when the RT field is B. Prohibited when the UNE field is populated. Otherwise optional. Identifies a code assigned to a trunk group or CCS Link Set. The code is unique to each established trunk group or CCS Link Set. Required when the ACT field on the ASR Form is N, the first position of the REQTYP field on the ASR Form is M and the RT field is D or F. Prohibited when the RT field is B. Otherwise optional. Identifies the number of trunks provided to the customer for service ordered in trunks or busy hour minutes of capacity. The total of all TRKQTY entries must equal the entry in the QTY field on the ASR Form when that entry is in trunks. Required when the RT field is D or F, the ACT field on the ASR Form is N, C, D or M, the UNIT field on the ASR Form is populated and the first position of the REQTYP field on the ASR Form is M. Prohibited when the RT field is B. Prohibited when the UNIT field on the ASR Form is not populated. Otherwise optional. Identifies the telephone number assigned in some central offices (e.g., 1/1A ESS) to provide call routing. Prohibited when the RT field is B, otherwise optional.

61

FORD

Facility Order Number

17

A/N

Conditional

62

CRO

Complete with Related Order Number Access Service Group

17

A/N

Conditional

ASG

A/N

Optional

64

SSWC

SECLOC Serving Wire Center

11

A/N

Conditional

65

TSC

Two Six Code

A/N

Conditional

66

TRKQTY

Trunk Quantity

Conditional

67

DTN

Discrete Telephone Number

10

A/N

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-78

3.9 CN - Confirmation Notice Form


Field EQPDESG Data Description Equipment Designation Length 10 Type A/N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes & Conditions A code used to identify a piece of equipment at the customer location indicated in the ACTL field. Required when the RT field is D and the FACDESG field is not populated, otherwise prohibited. Identifies the floor, aisle, and bay/cabinet where the equipment indicated in the EQPDESG field is located. Required when the RT field is D and the EQPDESG field is populated, otherwise prohibited. Identifies the number assigned to a panel, shelf or case within the bay/cabinet indicated in the RELAY RACK field. Required when the RT field is D and the RELAY RACK field is populated, otherwise prohibited. Identifies the facility/cable used in provisioning this service at the customer location indicated in the ACTL field. Required when the RT field is D and the EQPDESG field is not populated, otherwise prohibited. Identifies the type of facility indicated in the FACDESG field. Required when the RT field is D and the FACDESG field is populated, otherwise prohibited. Identifies specific connection points (i.e., channel, jack, slot, pin or pair) within the facility or cable indicated in the FACDESG field. Required when the RT field is D and the FACDESG field is populated, otherwise prohibited. Identifies the specific channel(s) within the DS1 facility indicated in the FCKT field. Required when the RT field is D and the FCKT field is populated, otherwise prohibited. Identifies the total length of all facilities (A to Z) used to provide this service. The entry in this field is reflected in miles (M), Kilofeet (K) or Kilometers (C). Required when the RT field is D and the ACT field on the ASR Form is N or T. Optional when RT field is D and the ACT Field on the ASR Form is C. Otherwise prohibited. This field contains various information required for circuit installation; e.g. frame, block terminations, presubscribed settings, plant options. Frame information may include bay, panel, jack, floor and aisle for DSX-1 and DSX-3 terminations. Optional when the RT field is D, otherwise prohibited. Identifies each VC as a unique number. Required when the first position of the REQTYP field on the ASR Form is V or X and the VC NUM on the VC Form is populated, otherwise prohibited.

68

69

RELAY RACK

Relay Rack

10

A/N

Conditional

70

UNIT

Unit

A/N

Conditional

71

FACDESG

Facility/Cable Designation

A/N

Conditional

72

FACTYPE

Facility Type

A/N

Conditional

73

CHANNEL

Channel

11

A/N

Conditional

74

FCHAN

Facility Channel

A/N

Conditional

75

RTE MI

Route Miles

A/N

Conditional

M= Miles K = Kilofeet C = Kilometer

76

MISC

Miscellaneous Information

15

A/N

Conditional

77

VC NUM

Virtual Connection Number

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-79

3.9 CN - Confirmation Notice Form


Field 78 DLCI Data Description Data Link Connection Identifier Length 4 Type N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the logical connection address between the provider switch and the circuit. Required when the first position of the REQTYP field on the ASR Form is V or X and the BSC field on the Transport or EUSA Form is F and the VST field on the VC Form is A, C or blank and the NVC field on the Transport or EUSA Form is populated, otherwise prohibited. Identifies the logical connection address between the providers switch and the circuit for the virtual path requested. Required when the first position of the REQTYP field on the ASR Form is V or X, the BSC field on the Transport or EUSA Form is C, the VST field on the VC Form is B or blank, and the VCACT field on the VC Form is D, N or R. Optional when the first position of the REQTYP field on the ASR Form is V or X, the BSC field on the Transport or EUSA Form is C, the VST field on the VC Form is B or blank and the VCACT field on the VC Form is K. Otherwise prohibited. Identifies the logical connection address between the provider switch and the circuit for the virtual circuit requested. Required when the first position of the REQTYP field on the ASR Form is V or X, the BSC field on the Transport or EUSA Form is C, the VST field on the VC Form is A, C or blank, the VCACT field on the VC Form is D, N or R and the CTYP field on the VC Form is not P. Optional when the first position of the REQTYP field on the ASR Form is V or X, the BSC field on the Transport or EUSA Form is C the VST field on the VC Form is A, C or blank, the VCACT field on the VC Form is K and the CTYP field on the VC Form is not P. Otherwise prohibited. Identifies the related provider physical circuit ID against which the VC activity is requested. Required when the RECCKT field on the VC Form is not populated, otherwise prohibited. Identifies the logical connection address between the providers switch and the related circuit. Required when the first position of the REQTYP field on the ASR Form is V or X, the BSC field on the Transport or EUSA Form is F, the VST field on the VC Form is blank, and the NVC field on the Transport or EUSA Form is populated. Required when the first position of the REQTYP field on the ASR Form is V or X, the BSC field on the Transport or EUSA Form is C, the VST field on the VC Form is B, and the NVC field on the Transport or EUSA Form is populated. Otherwise prohibited.

79

VPI

Virtual Path Identifier

Conditional

80

VCI

Virtual Circuit Identifier

Conditional

81

RECCKT

Related Exchange Company Circuit Identification Related Data Link Connection Identifier

53

A/N

Conditional

82

RDLCI

Conditional

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-80

3.9 CN - Confirmation Notice Form


Field 83 RVPI Data Description Related Virtual Path Identifier Length 4 Type N Usage Conditional Valid Entries

Verizon ASR Business Rules v 27


Notes & Conditions Identifies the logical connection address between the providers switch and the related circuit for the virtual path requested. Required when the first position of the REQTYP field on the ASR Form is V or X, the BSC field on the Transport or EUSA Form is C, the VST field on the VC Form is blank, the VCACT field on the VC Form is D, N or R and the RECCKT field on the VC Form is populated. Prohibited when the first position of the REQTYP field on the ASR Form is V or X, the BSC field on the Transport or EUSA Form is F, and the VST field on the VC Form is blank. Prohibited when the first position of the REQTYP field on the ASR Form is V or X, the BSC field on the Transport or EUSA Form is C, and the VST field on the VC Form is B. Prohibited when the first position of the REQTYP field on the ASR Form is not V or X. Otherwise optional. Identifies the logical connection address between the providers switch and the related circuit for the virtual circuit requested. Required when the first position of the REQTYP field on the ASR Form is V or X, the BSC field on the Transport or EUSA Form is C, the VST field on the VC Form is blank, the VCACT field on the VC Form is D, N or R and the RECCKT field on the VC Form is populated. Prohibited when the first position of the REQTYP field on the ASR Form is V or X, the BSC field on the Transport or EUSA Form is F, and the VST field on the VC Form is blank. Prohibited when the first position of the REQTYP field on the ASR Form is V or X, the BSC field on the Transport or EUSA Form is C, and the VST field on the VC Form is B. Prohibited when the first position of the REQTYP field on the ASR Form is not V or X. Otherwise optional. Identifies the page number and total number of pages contained in this transaction.

84

RVCI

Related Virtual Circuit Identifier

Conditional

85

PG _ of _

Page _ of _

Required

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 3-81

4.1 Appendix A: Type of Change Matrix

Verizon ASR Business Rules v 27

4 Appendix 4.1 Appendix A: Type of Change Matrix 4.1.1 Version 26 - 03/10/03


Update Business Rules for ASR 27, effective September 13, 2003; to incorporate ATIS OBF ASOG 27 changes, and the associated Verizon business rules.

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 4-1

4.2 Appendix B: Changes Matrix

Verizon ASR Business Rules v 27

4.2 Appendix B: Changes Matrix 4.2.1 Summary of Changes


The following is a high level summary of the changes made in Section 3, ASR Forms, associated with Version Number 27. An asterisk in the Field Name column indicates changes made are, partially or wholly due to changes in the ASOG. Form ASR Field # 3 8 19 21 23 24 25 27 30 47 48 51 52 56 60 63 85 90 91 99 100 101 Field Name VER UNE LUP REQTYP ACTI QSA WST RTR TQ UNIT PIU ECCKT QTY BIC Telephone Number ACTL APOT TEL NO TEL NO INIT FAX NO DSGCON TEL NO DSG FAX NO Change Field changed to required per ASOG Changed ASOG note remove REQTYP Q Changed ASOG note Removed Q per ASOG New field and ASOG notes Renumbered from this field to end increment by one Per ASOG remove Q from Usage note Changed ASOG usage note Changed ASOG usage note Added ASOG valid entry and ASOG notes Changed ASOG usage note Changed ASOG usage note Changed ASOG usage note Changed ASOG usage note Change form 12 to 10 numerics(excluding 2 preprinted hyphens) Changed ASOG usage note Changed ASOG usage note Change form 17 to 15 numerics(excluding 3 preprinted hyphens) Change form 17 to 15 numerics(excluding 3 preprinted hyphens) Change form 12 to 10 numerics(excluding 2 preprinted hyphens) Changed ASOG usage note Change form 17 to 15 numerics(excluding 3 preprinted hyphens) Change form 12 to 10 numerics(excluding 2 preprinted hyphens) and changed ASOG usage note

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 4-2

4.2 Appendix B: Changes Matrix Form Field # 103 104 106 107 108 109 110 113 115 Field Name STREET DRC FLOOR ROOM CITY STATE ZIP CODE TEL NO TEL NO Change Changed ASOG usage note Changed ASOG usage note Changed ASOG usage note Changed ASOG usage note Changed ASOG usage note Changed ASOG usage note Changed ASOG usage note Change form 17 to 15 numerics(excluding 3 preprinted hyphens) Change form 12 to 10 numerics(excluding 2 preprinted hyphens)

Verizon ASR Business Rules v 27

Trunking 8 14 17 36 40 41 51 55 63 65 Transport 1 29 45 47 48 CCNA SECLOC GBTN GTEL CTX TEL Changed ASOG valid entry Changed ASOG valid entry notes Change form 12 to 10 numerics(excluding 2 preprinted hyphens) (shaded) Change form 17 to 15 numerics(excluding 3 preprinted hyphens) (shaded) Change form 12 to 10 numerics(excluding 2 preprinted hyphens) (shaded) TTT TRFTYP CIC HBAN NC1 FIMPTEL REL TSC CGAP SSPC PCU Changed ASOG usage note Changed ASOG usage note Changed ASOG usage note Changed ASOG usage note Changed ASOG usage note Change form 17 to 15 numerics(excluding 3 preprinted hyphens) Changed ASOG usage note Changed ASOG valid entry of numeric to 1-999 (Shaded) Changed ASOG field length from 15 to 11 (Shaded) Added two new ASOG valid entries (Shaded)

ACI No Changes Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 4-3

4.2 Appendix B: Changes Matrix Form SALI Field # 39 40 43 44 45 46 Field Name ACTEL AACTEL ALCON ALCONTEL ACC WKTEL Change

Verizon ASR Business Rules v 27

Change form 17 to 15 numerics(excluding 3 preprinted hyphens) Change form 17 to 15 numerics(excluding 3 preprinted hyphens) New ASOG field New ASOG field Renumbered Field Change form 12 to 10 numerics(excluding 2 preprinted hyphens) (shaded) AND Renumbered Field

TQ 6 7 7 8 9 32 38 56 63 65 66 67 C/NR 8 10 CN 11 13 AP REP TEL AP DSGCON Change form 17 to 15 numerics(excluding 3 preprinted hyphens) Change form 17 to 15 numerics(excluding 3 preprinted hyphens) TEL NO AP REP TEL Change form 17 to 15 numerics(excluding 3 preprinted hyphens) Change form 17 to 15 numerics(excluding 3 preprinted hyphens) TEL NO DB TEST TN TTEST TN TTEST RESP REF 950-XXXX CCLASS TEL NO LRN G TEL NO C.NPA/NXX LRN Change form 17 to 15 numerics(excluding 3 preprinted hyphens) Remove field per ASOG New ASOG field New ASOG field Renumbered all fields following increment by one Changes ASOG note(Shaded) Re-named AOG Field Change form 17 to 15 numerics(excluding 3 preprinted hyphens) Changed ASOG notes Change form 17 to 15 numerics(excluding 3 preprinted hyphens) Changed ASOG notes Changed ASOG notes

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 4-4

4.2 Appendix B: Changes Matrix Form Field # 14 15 16 17 19 24 25 28 30 31 38 39 45 45 48 49 50 64 65 66 67 Field Name TEL APF DSGCON TEL APF OCO AP OCO AP MCO APF MCO DLRD CDLRD EBD SWC SC FDLRD FCDLRD ECAPC RTI ECCKT NHN REF NUM SSWC TSC TRKQTY DTN Change Change form 17 to 15 numerics(excluding 3 preprinted hyphens) Change form 17 to 15 numerics(excluding 3 preprinted hyphens) (Shaded) Change form 17 to 15 numerics(excluding 3 preprinted hyphens) (Shaded) Change form 17 to 15 numerics(excluding 3 preprinted hyphens) (Shaded) Change form 17 to 15 numerics(excluding 3 preprinted hyphens) (Shaded) Changed ASOG notes Changed ASOG notes Changed ASOG notes Changed ASOG notes Changed ASOG notes Changed ASOG notes Changed ASOG notes Removed field Renumbered all field following decrease by one Changed ASOG notes Changed ASOG notes Changed ASOG notes Changed ASOG notes Changed ASOG notes Changed ASOG notes Changed ASOG notes

Verizon ASR Business Rules v 27

Verizon proprietary - subject to the restrictions on the notices page. Release Date: September 2003 Publication Date: July 2003 4-5

You might also like