You are on page 1of 11

LIST OF ATTEMPTED QUESTIONS AND ANSWERS

Match The Following


Correct Answer Your Answer

Fast Ethernet Autonegotiation No need of CSMA/CD

Bridged Ethernet Raising BW and separate collision N-


port switch and divided collision by N

Switched Ethernet N-port switch and divided collision by N


10 Mbps

Full-duplex Ethernet No need of CSMA/CD 1000 Mbps

Multiple Choice Single Answer


The network identification in an IP address is called
as :-
Correct Answer Netid
Your Answer Netid

Select The Blank


Gigabit Ethernet operates on ________ data rate.
Correct Answer 1000 Mbps
Your Answer 1000 Mbps

Select The Blank


In ATM, ________ is designed to support a data stream
that has a constant bit rate.
Correct Answer AAL1
Your Answer AAL3/4

Multiple Choice Single Answer


ARQ stands for :-
Correct Answer Automatic repeat request
Your Answer Automatic retransmission request

Multiple Choice Single Answer


Topology requires a central controller or hub.
Correct Answer Star
Your Answer Star

Multiple Choice Single Answer


TCP offers :-
Correct Answer Full duplex service
Your Answer Full duplex service

Multiple Choice Single Answer


Which of the following connects LAN to another of the
same type?
Correct Answer A network bridge
Your Answer A network gateway

True/False
IPv6 is also known as IPng.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Layer one of the OSI model is :-
Correct Answer Physical layer
Your Answer Physical layer

True/False
Data rate of traditional Ethernet is 100Mbps.
Correct Answer False
Your Answer False

True/False
Auto negotiation is a feature of fast Ethernet.
Correct Answer True
Your Answer True

True/False
The 5-7 digits are known as the country code of the
Network User Address (NUA)
Correct Answer False
Your Answer True

True/False
GMII is a physical component.
Correct Answer False
Your Answer False

Multiple Choice Single Answer


Which layer in the Ethernet standard communicates
with the OSI network layer?
Correct Answer LLC
Your Answer Protocol

Select The Blank


In HDLC ________ are used for flow and error control
where piggy backing is impossible.
Correct Answer S - frame
Your Answer Frame check sequence

Select The Blank


The Frame Relay committed Information Rate
represents________.
Correct Answer The minimum data rate on the network
Your Answer The maximum data rate on the network

Multiple Choice Multiple Answer


Transmission media is characterized by :-
Correct Answer Throughput , Propagation speed , Propagation
time
Your Answer Propagation speed , Propagation time , Received
signal

Multiple Choice Single Answer


In a access method a station that has token is :-
Correct Answer Token passing
Your Answer Token passing

True/False
Application programs as well as all protocol software
from the internet layer upward use only IP address.
Correct Answer True
Your Answer True

True/False
Modulation is the process of sending a file from one
computer to another computer.
Correct Answer False
Your Answer False

Multiple Choice Single Answer


In which method a station reserves a slot for data by
setting its flag in a frame?
Correct Answer Reservation
Your Answer Polling Access

Multiple Choice Single Answer


The main advantage of ISO model is that :-
Correct Answer It allows integration of software and hardware
Your Answer It fits in well in network

Multiple Choice Multiple Answer


AAL sub layers are :-t
Correct Answer Convergence sub layer (CS) , Segmentation and
reassembly (SAR)
Your Answer Data link layer (DLC) , Media access control (MAC)

Multiple Choice Multiple Answer


IPCP defines three categories of seven packets :-
Correct Answer Configure , Terminate , Code
Your Answer Configure , Terminate , Code

Select The Blank


The fast Ethernet has ________ data rate.
Correct Answer 100 Mbps
Your Answer 100 Mbps

Select The Blank


Data link layer is responsible for transmitting
________ from one node to other.
Correct Answer Frames
Your Answer Frames

Select The Blank


Network layer is responsible for delivery of ________
from one source to other.
Correct Answer Packets
Your Answer Packets

Match The Following


Correct Answer Your Answer
Multiplexing FDM Modem

Bounded Media Fiber optic cable FDM

Wireless Transmission Microwave Microwave

Highest Attention UTP cable UTP cable

Multiple Choice Multiple Answer


Operational features of Ethernet are:-
Correct Answer 10 mbps rate , CSMA/CD protocol , 500 meters
length
Your Answer 10 mbps rate , CSMA/CD protocol , Star topology

Multiple Choice Single Answer


The main functional difference between circuit
switched digital networks (CSDN) and packet-switched digital network
(PSDN)is
Correct Answer That a CSDN establishes a permanent
connection between two nodes where PSDN uses a virtual circuit
Your Answer That a CSDN establishes a permanent connection
between two nodes where PSDN uses a virtual circuit

Multiple Choice Single Answer


Frame Relay operates at :-
Correct Answer Physical and data link layer
Your Answer Data Link layer

Multiple Choice Multiple Answer


HDLC supports :-
Correct Answer Half duplex communication , Full duplex
communication , ARQ mechanisms
Your Answer Half duplex communication , ARQ mechanisms ,
Pipelining

Select The Blank


The ________ layer is responsible for host-to-host
delivery.
Correct Answer Network
Your Answer Data link

True/False
Frame Relay is a virtual circuit network.
Correct Answer True
Your Answer False

True/False
For connecting several LANs, backbone networks are
used.
Correct Answer True
Your Answer True

True/False
The session layer takes the communication service of
the transport layer and adds application -oriented functions.
Correct Answer True
Your Answer True

Multiple Choice Multiple Answer


The physical path in ATM is :-
Correct Answer Physical connection between two switches ,
Connection between an end point and a switch , Used for data transfer
Your Answer Physical connection between two switches , Used to
connect switches , Used for data transfer

Select The Blank


In Base T4 Ethernet ________ line coding is used.
Correct Answer 8B /6T
Your Answer 8B /10B

Multiple Choice Multiple Answer


Channelization protocols are :-
Correct Answer TDMA , CDMA , FDMA
Your Answer CDMA , CSMA/CD protocol

Select The Blank


Error control is________.
Correct Answer Error detection and correction
Your Answer Error detection and correction

Multiple Choice Multiple Answer


The Types of error that Internet Control Message
Protocol (ICMP) can handle are :-
Correct Answer Destination unreachable , Source quench ,
Redirection
Your Answer Destination unreachable , Redirection

Multiple Choice Multiple Answer


The functions of ATM layers are :-
Correct Answer Routing , Switching , Multiplexing
Your Answer Routing , Switching , Bridging

Multiple Choice Single Answer


Base band is :-
Correct Answer Transmission of signals without modulation
Your Answer Transmission of signals without modulation

Multiple Choice Single Answer


The basic Ethernet design does not provide :-
Correct Answer Automatic retransmission of a message
Your Answer Multiple virtual networks

Multiple Choice Multiple Answer


In digital data transmission :-
Correct Answer Baud rate is equal to bit rate , Baud rate is
always smaller than the bit rate
Your Answer Baud rate is equal to bit rate

Select The Blank


In X.25 network layer protocol, the data
contains________.
Correct Answer One octet of header plus data
Your Answer Two octet of header plus data

LIST OF ATTEMPTED QUESTIONS AND ANSWERS

Multiple Choice Multiple Answer


A data terminal serves as :-
Correct Answer Effecter , Sensor
Your Answer Transmitter , Modulator

Multiple Choice Single Answer


Topology requires a multipoint connection called :-
Correct Answer Mesh
Your Answer Star

True/False
The 5-7 digits are known as the country code of the
Network User Address (NUA)
Correct Answer False
Your Answer False

Multiple Choice Single Answer


An error detecting code which is the remainder
resulting from dividing the bits to be checked by a predetermined
binary number, is known as :-
Correct Answer Cyclic Redundancy check
Your Answer Error rate

True/False
The application layer of a network consists of
software being run on the computer connected to the network.
Correct Answer True
Your Answer True

Select The Blank


Flow control ________.
Correct Answer Prevents overflow at receiver
Your Answer Prevents overflow at transmitter

Multiple Choice Single Answer


Fiber Optic Ethernet is also known as:-
Correct Answer 10BASEF
Your Answer 10BASET

Select The Blank


The ________ Timer is used in termination phase.
Correct Answer Time waited
Your Answer Time waited

Select The Blank


In Base T4 Ethernet ________ line coding is used.
Correct Answer 8B /6T
Your Answer 8B /10B
Multiple Choice Single Answer
Which of the following device copies electrical
signals from one Ethernet to another?
Correct Answer Repeater
Your Answer Passive hub

Multiple Choice Single Answer


Which of the following connects LAN to a WAN?
Correct Answer A network gateway
Your Answer A network gateway

Multiple Choice Single Answer


Which of the following communications lines is best
suited to interactive processing applications?
Correct Answer Full-duplex lines
Your Answer Full-duplex lines

Multiple Choice Multiple Answer


A spanning tree bridge :-
Correct Answer Has no loops , Creates logical topology ,
Uses BPDU
Your Answer Has no loops , Uses BPDU , Forward every frame

Multiple Choice Multiple Answer


In fast Ethernet functions of autonegotiation are :-
Correct Answer To allow incompatible devices to one other ,
To allow one device to have multiple capability , To allow station to
check hub's capability
Your Answer To allow incompatible devices to one other , To allow
one device to have multiple capability

True/False
The simultaneous transmission of data to a number of
stations is known as broadcast.
Correct Answer True
Your Answer True

True/False
The physical layer of a network controls error
detection and correction.
Correct Answer False
Your Answer False

Multiple Choice Single Answer


Which organisation has developed much of the original
standards?
Correct Answer IEEE
Your Answer IEEE

True/False
UDP is a connectionless, unreliable protocol.
Correct Answer True
Your Answer False

Multiple Choice Multiple Answer


Twisted pair cables are preferred when :-
Correct Answer The LAN is under cost constraint , Relatively
easy installation is need
Your Answer The LAN is under cost constraint , Relatively easy
installation is need , Network is small

Match The Following


Correct Answer Your Answer

Communication system Hardware, software, and data transferal links


Hardware, software, and data transferal links

Digital 0 and 1 0 and 1

FDM Band width of the medium Band width of the medium

Start and stop bits Asynchronous transmission Asynchronous


transmission

Multiple Choice Single Answer


Peer to peer communication involves:-
Correct Answer Computers to share information over a network
Your Answer Computers to share information over a network

Multiple Choice Single Answer


Twisted -pair Ethernet is also known as :-
Correct Answer 10BASET
Your Answer 10 BASE2

Multiple Choice Multiple Answer


Broadcasting methods are :-
Correct Answer Flooding , Multidestination routing , Reverse
path forwarding
Your Answer Random routing , Multidestination routing , Reverse
path forwarding

Match The Following


Correct Answer Your Answer

Full - duplex Simultaneous transmission in both directions


Simultaneous transmission in both directions

Modem Modulator Demodulator Modulator Demodulator

Bit Binary digit 0 and 1

Synchronous communication efficiency High High

Select The Blank


In ALOHA ________ is the downloading carrier
frequency.
Correct Answer 413 MHz
Your Answer 407 MHz

Multiple Choice Single Answer


Bandlimited signal is :-
Correct Answer A signal all of whose energy is contained
within a finite frequency range
Your Answer The simultaneous transmission of data to a number of
stations

Multiple Choice Single Answer


In the TCP/IP suite the protocol used for physical
addressing of the next hop :-
Correct Answer ARP
Your Answer ARP

Multiple Choice Multiple Answer


Categories of traditional Ethernet are :-
Correct Answer 10Base 5 , 10Base 2 , 10Base T
Your Answer 10Base 5 , 10Base 2 , 10Base T

Multiple Choice Multiple Answer


The functions of ATM layers are :-
Correct Answer Routing , Switching , Multiplexing
Your Answer Routing , Switching , Multiplexing

True/False
The main purpose of a data link content monitor
detect problems in protocols.
Correct Answer True
Your Answer True

Multiple Choice Single Answer


Frame Relay operates at :-
Correct Answer Physical and data link layer
Your Answer Physical and data link layer

Multiple Choice Single Answer


The actual transmission and reception of data on an
RS - 232 interface occurs :-
Correct Answer On pins 2 and 3
Your Answer On pins 2 and 3

Select The Blank


The ________ field is used to order packets of a
message.
Correct Answer Sequence number
Your Answer Checksum

Select The Blank


In fast Ethernet autonegotiation allows ________
negotiation.
Correct Answer Data rate
Your Answer Data rate

Multiple Choice Multiple Answer


Error correction and detection in OSI model is done
by :-
Correct Answer Data link Layer , Transport Layer
Your Answer Physical layer , Data link Layer
Multiple Choice Multiple Answer
Link control protocol (LCP) is responsible for :-
Correct Answer Establishing , Maintaining , Configuring
Your Answer Establishing , Maintaining , Configuring

Multiple Choice Multiple Answer


X.25 uses :-
Correct Answer Packet assembler/disassembler , Packet
switched network , Access lines to public data networks
Your Answer Packet assembler/disassembler , Packet switched
network , Access lines to public data networks

Select The Blank


The full abbreviation for AAL is________.
Correct Answer Application Adaptation layer
Your Answer Application Adaptation layer

Select The Blank


The ________ timer is needed to handle the zero
window size.
Correct Answer Persistence
Your Answer Keep alive

Select The Blank


Frame Relay is not used for ________ due to delays in
transmission of variable frame sizes.
Correct Answer Real-time video
Your Answer Real-time video

True/False
Demodulation is the process of converting digital
signals to analog signals.
Correct Answer False
Your Answer False

True/False
A device that can convert digital signals to analog
signals is a packet.
Correct Answer False
Your Answer False

Multiple Choice Single Answer


A hub is actually :-
Correct Answer A multiport repeater
Your Answer A multiport repeater

Multiple Choice Single Answer


The cost assigned for passage of a packet through a
network is called :-
Correct Answer Metric
Your Answer Metric

Multiple Choice Multiple Answer


PAP packets include :-
Correct Answer Authenticate request , Authenticate ack ,
Authenticate nak
Your Answer Authenticate request , Authenticate ack ,
Authenticate nak

Select The Blank


In 100BaseX ________ bits of data is received from
network interface card.
Correct Answer 8
Your Answer 16

Select The Blank


In digital data transmission________.
Correct Answer Baud rate is equal to bit rate
Your Answer Baud rate is equal to bit rate

You might also like