Professional Documents
Culture Documents
Surface Profile
The proper and effective preparation of a surface prior to coating is essential. Making sure that the correct roughness or profile has been generated is essential. If the profile is too low, the adhesion of the coating to the surface will be reduced. Too high and there is the danger that the profile peaks will remain uncoated allowing rust spots to occur.
Elcometer 123 Range Scale Resolution Dimensions (nominal) Weight Power Part Number Accessories Metric E123A--M0 - 1000m 0 - 40mils 2m 0.1mils 105 x 55 x 25mm 4.1 x 2.2 x 1 235g 8oz Not Required Imperial E123A--E-
Elcometer 223 0 - 1000m 0 - 40mils 1m 0.1mils 105 x 55 x 25mm 4.1 x 2.2 x 1 365g 9oz 3V Lithium CR2032 Battery E223----2 Elcometer 223 units are switchable Miniprinter including printer lead Printer lead X2239964B T22312213
97
Surface Profile
Elcometer 101 Scale 45 Roughness Gauge
Whereas comparators allow the estimation of surface roughness by both touch and sight, the Elcometer 101 estimates the roughness of iron and steel surfaces. Its scale indicates the suitability of the surface for paints, metal coatings and hard metal coatings. No batteries required Simple and easy to use
Blue Band: Indicates surface is generally accepted as suitable for painting Yellow Band: Indicates the surface is suitable for sprayed metal coatings Red Band: Indicates the surface is suitable for hard sprayed metal coatings
Weight
185g (6oz)
Dimensions
19 x 54mm (0.75 x 2.13) test area Elcometer 122 Coarse Elcometer 122 X-Coarse 38-114m 1.5-4.5mils E122----C
Number of Tests Elcometer 122 X-Coarse Plus Profiles alone 114m Profiles alone 4.5mils E122----F
Range
Metric Imperial
Part Number
Metric: 0-5mm
(Imperial: 0.2)
98
www.elcometer.com
Elcometer 125 Surface Comparator
Comparators allow the estimation of surface roughness by both touch and sight. Available in both grit and shot Metric units only
Surface Profile
ISO 8503-2
Grit Section Profiles Part Number 25, 60, 100, 150m E125----1
Elcometer 129/1 Rubert Grit Elcometer Section Profiles Part Number 0.4, 0.8, 1.6, 3.2, 6.3 and 12.5m E129----1
129/2 Rubert Shot Elcometer 0.4, 0.8, 1.6, 3.2, 6.3 and 12.5m E129----2
129/3 Rugotest Shot and Grit N6, N7, N8, N9, N10 and N11 equivalent to 0.8, 1.6, 3.2, 6.3, 12.5 and 25m roughness averages respectively E129----3
Sand 0.5, 1, 2, 3, 4mils E127----2 Surface Profile Disc Holder and x5 Magnifier
99
Surface Profile
Elcometer 133 Ships Propeller Roughness Comparators
Comparators allow the estimation of surface roughness by both touch and sight. The Elcometer 133 Ships Propeller Roughness Comparators have been developed for the specific profiles related to the condition of ships propellers over the life of the propeller. Comparators are also supplied with guidance on the report for Propeller Blades. Two versions are available, one for above water (dry dock) inspection and another for inspection work carried out underwater.
Surface Comparator 1, 2, 4, 8, 16, 30m 6, 12, 24, 48, 96, 180m H133--15A
Underwater Comparator 1, 2, 4, 8, 16, 30m 6, 12, 24, 48, 96, 180m H133--16A
Dimensions Weight
100
www.elcometer.com
Elcometer 7060 SURFTEST SJ-201P Roughness Tester
A portable device operating on the inductive principle to measure the roughness of a wide variety of surfaces. This instrument consists of a processing unit with a digital display of the current parameters and a mobile measurement head which is fitted with a retractable diamond stylus sensor, (5m/0.2mils radius), and has a working load of 4mN. The roughness profiles are determined by motorized travel of the sensor over the surface to be tested. Each unit is supplied with a roughness reference standard, case, tools and mains adapter. Parameters available include: A1, A2, mr, Mr1, Mr2, Pc, R3z, Ra, Rk, Rp, Rpk, Rq, Rt, Rvk, Ry, Rz, S, Sm and Vo.
FEATURES RS232 output for statistics printer or PC Working range: Ra 0.01 to 100m (0 to 4mils), Ry/Rz 0.02 to 300m (0 to 12mils) Cut-off lengths: 0.25, 0.8, 2.5mm (0.01, 0.03, 0.1) Sampling lengths: 0.25, 0.8, 2.5mm (0.01, 0.03, 0.1") Number of sampling spans: x1, x3, x5 Description Elcometer 7060 SURFTEST SJ-201P Roughness Tester
Surface Profile
101