Professional Documents
Culture Documents
This program corrects the nominal condition cooling performance of the air-conditioners and air-to-air pumps to actual condtions (outdoor ai air flow rate). Values used are those presented in Table 5.3 of HVAC Simplified. The program can be modified to correct the equipment pe changing the published nominal capacity, demand and air flow rate values in the 'MgfData' worksheet.
HPCap
3 Ton
Input Cells
Performance @ Nominal Conditions TCNom 35.8 kBtu/h SCNom 26.4 kBtu/h kWNom 2.97 kW SHRNom 0.74 EERNom 12.1 Btu/w-hr Cooling Nominal Conditions EATNom 95 F cfmNom 1200 cfm DBNom 80 F WBNom 67 F RHNom #VALUE! % Heating Nominal Conditions EAThNom 70 F CFMhNom 1200 cfm OAThNom 17 F HCap17 22.6 kBtu/h kW17 2.76 kW COP17 2.40
TC SC kW
Output Cells Do not type in Output Cells Nominal Cooling to Actual Correction Factors OAT cfm wb db 1.000 0.998 0.934 NA 1.005 1.000 NA #VALUE! 1.002 0.999 0.972 NA
Corrected Cooling Conditions and Performance Actual Conditions (sea level) Performance @ Actual Conditions OATemp 95 F (outdoor) TCcor 33.4 kBtu/h AirFlow 1200 cfm (indoor) SCcor #VALUE! kBtu/h DryBulb 75 F (indoor) kWcor 2.89 kW WetBulb 63 F (indoor) SHRcor #VALUE! RelHumid ### % (indoor) EERcor 11.5 Btu/w-hr
Corrected Heating Conditions and Performance 20 F (outdoor) Hcap 22.1 kBtu/h 1200 cfm (indoor) kWheat 2.86 kW 70 F (indoor) COP* 2.3 3.0% % *COP does not include auxiliary heat.
If Macro security level is set at high, this program will result in errors in the cells [NAME?]. To reset the security level (Office 2003 and earlier), 1. Close the program. 2. Click on "Tools" on the main tool bar, select "Macro", select "Security. 3. Reset security level to Medium (recommended) or Low 4. Exit Excel 5. Re-Open Excel 6. Run program
For 2007 Office products, the terminology "tr and the procedure has been changed (as you the "trust" settings:
Open Excel Click the Office Button (top left corner of scr Click on "Excel Options" button @ the bottom Click on "Trust Center" Click on "Trust Center Settings" Click on " Enable all macros.." Open and Run the programs An option would be to reset the trust setting and, Click on " Disable macros with notification"
to actual condtions (outdoor air temperature, indoor air temperature, ied to correct the equipment performance of other manufacturers by
Nominal Heating to Actual Correction Factors OAT cfm IAT Hcap 1.01 1.00 1 kWHeat 1.00 1.00 1
oducts, the terminology "trust" has replaced "security" has been changed (as you might expect). To change s:
utton (top left corner of screen) ptions" button @ the bottom of the pop-up window nter" nter Settings" all macros.." programs e to reset the trust setting by repeating steps 1 thru 5
Tot Cap (MBtu/h) Sen Cap (MBtu/h) Tot Power (kW) Air Flow (cfm)
Input nominal perfomance @ 95F OAT & 80/67F IAT 2 ton 2.5 ton 3 ton 3.5 ton 4 ton 5 ton 24.7 31.2 35.8 43.6 50 57.6 18.3 24.2 26.4 32 35.7 42 1.9 2.6 2.97 3.51 4.1 5.08 800 1100 1200 1300 1400 1700
12.1 1.5
19.2 2.5
22.6 2.76
28.7 3.08
31 3.31
35.7 4.07
40 EAT 85 95 105 115 EAT 85 95 105 115 TCcf 1.039 1.000 0.964 0.930 TC 37.2 35.8 34.5 33.3 SCcf 1.023 1.000 0.981 0.928 SC 27 26.4 25.9 24.5 kWcf 0.906 1.000 1.114 1.232 kW 2.69 2.97 3.31 3.66 35 30 25 20 15 10 5 0 50 EAT= TC= SC= kW= 95 F 35.8 MBtu/h 26.6 MBtu/h 2.98 kW 60 70 80 90 100 110 120
TC SC kW
1.200
1.100
1.000
0.900
oat
TC SC kW
oat 57 47 37 27 17
110
120
110
120
cfHC cfKW
1.1
cfm% 85 95 105 115 TCcf 0.98 0.99 1.01 1.02 SCcf 0.93 0.98 1.02 1.07 kWcf 0.98 0.99 1.01 1.03
1.05
Correction Factor
75
HC
85
115
105 Cfm
115
125
Corr. Fac
TCcf kWcf
1 0.9 0.8 60 62 64 66 68
70
70 75 80 85 90 95
75
0.64 1.3 0.82 f(x) =f(x) = 0.03xf(x) = 0.03xf(x) = 0.03x - 2.13 0.02x - 0.8 - 1.37 - 1.18 1.03 0.98 f(x) = 0x + 1.14 1.16 1.02 1.2 60 70 1.02 1.1 1.01 1 1.01 1.06 1 f(x) = 0.01x + 0.44 1.04 0.9 1 1.02 0.99 1 0.8
Linear Regression for 60 65 Linear Regression for 65
iath 60 65 70 75
SCcf
0.99 0.7 0.98 iath kWheat 60 0.92 65 0.96 70 1 75 1.04 0.98 0.96 0.6 60 65 70 0.98 0.94 58 60 62 0.92 0.9 0.88 0.86 58 60 62 64 66 68 70 75 64 80 66 db
Line Reg HC
72
TCcf kWcf
66
68
70
72
t Bulb Temp(F)
68
70
72
74
76