You are on page 1of 46

INSPECTION REPORT

Name of work Contractor Consultant No. & Date of work Order Improvements to Electrical and Interior works for HD - One Centre at Zonal Office No.6 Keshwapur in Hubli. Shri Angadi P I and Company Jalavahini Management Services (P) Ltd., HUBLI CR-0909-96-0224-01-000000 Measurements
Sl.No .

Particulars

Unit

BOQ Quantity

No.s

Length

Breadth

Depth

Whether quality of work is Quantity satisfactory

Remarks

Providing and fixing computer table with granitetop made out of 19mm thick

machine polished telephonic black granite slab with nosing/19mm thick block

Each

3.00

3.00

Yes

board with wood veneeron top of approved color & shade as per drawing fixed

1. work of providing and preparing (including necessary carpentary work) completed. However, the 19mm thick machine polished telephonic black granite slab is not fixed in position. The reason being, the POP work is still not complete and is under p

over wood frame with dowel p

Providing and fixing 100mm wide vetain (vertical blinds of window fashion

fabric of tiwan make with 50mm thick aluminium powder coated channel with 2 valiance. Imported Acrylic self alignable mechanism and equally placing Yes 1. All Window Fashion Fabrics Aliminium accessories kept in store room due to POP work is under progress 2. Submitting the Photographs.

spacers, imported titing mechanism 1.00 1.00 2.00 2.00 Sqm Providing and fixing writing desk made out of 12mm thick clear glass for top of 18.08 1.83 1.83 1.78 0.91 2.51 2.39 1.50 1.50 4.59 4.37 5.34 2.73 17.04 Yes

writing desk and rubber wood for bottom and divideers. The entire desk 3 assembly is fixed securelyat sides to ornamental column of size Each 1.00 1.00 Yes 1. Except Glass for top of Writing Desk, other all work is completed.

0.23x0.30x2.5m, made out of 19mm thick p Providing and fixed 40mm dia stainless steel pipe of 16 gaige of approved a make and quality with dull/mat finish fixed firmely including bending to required shape and finish etc, completed including cost cost of all lead and lift,loading unloading hire

Rmtr

30.00

Yes

Providing and fixing executive table cum computer table made out of 19mm

thick

phenol

bonded

antitermite

boilingwater

proof

block

board

of

Each

1.00

1.00

Yes

1. work is completed.

greenply/catury/ksfic/approved make and quality confirming to IS stds on

either side of horizontal and vertical memb Providing and fixing wooden wall paneling made out of 19mm thick phenol

bonded anti termite boiling water proof block board of greenply/centry/ 6 approved quality and make conforming to IS standards as per detailed Sqm Yes Work is Completed

drawing issued by the Chief Architect. Go Hall Sqm Sqm Sqm Sqm Sqm Executive Room Sqm Sqm 1.00 1.00 1.00 1.00 1.00 1.00 1.00 2.20 1.86 2.00 6.80 5.00 2.20 2.80 0.90 0.65 0.65 0.90 0.90 0.90 0.90 1.98 1.21 1.30 6.12 4.50 1.98 2.52

Sqm Sqm Service Room Sqm Sqm Sqm Sqm Sqm 49.76

1.00 1.00 1.00 1.00 1.00 1.00

3.00 2.80 1.23 2.80 2.00 2.80

0.90 0.90 0.90 0.90 0.90 0.90

2.70 2.52 1.11 2.52 1.80 2.52 32.78

Providing and fixing computer table of size for server made out of 19mm thick

phenol

bonded

antitermite

boiling

water

proof

block

board

of

Sqm

0.90

1.00

1.20

0.75

0.90

Yes

1.Wood Work is completed.

greenpply/century/ksfic/approved make and quality confirning to IS standerd.

The table is made to a minimum height o

Providing and fixing Reception counter as per detailed drawing specification

and directions with 20mm thick machine polished telephonic black granite top

Rmtr

3.00

1.00

3.00

2.67

Yes

1.Except 20mm thick machine polished telephonic balck granite top, other all work is completed.

which is fixed over wood frame work with dowel pins and adhesives including

fixing 200mm wide 19 mm t Providing and fixing side units for computer counter table with granite top

made out of 19mm thick machine polished telephonic black granite slab with

Each

6.00

6.00

6.00

Yes

1.Work is completed.

nosing as per drawing fixed over wood frame with dowel pins and adhessives

the wood frame work is made o STAFF CHAIRS: Providing and supplying staff chairs of standered company 10 made up of MS tubes and upholstery as requirement & as directed by the engineer incharge of the work. Each 10.00 10.00 10.00 Yes

1. Providing of waiting multiseater with M.S tube frame works and porous and back arms.

11

Staff Chairs :

Each

8.00

8.00

8.00

Yes

1.Providing of High back Executive Revolving Chair having Handles with cushioned seat & back having cloth upholstery & five-legged base.Varified Bill for Anoop DeSigns Hubli. 1. Providing of waiting multiseater with M.S tube frame works and porous and back arms.

VISTOR CHAIRS (FOR FOUR MEMBERS SET)Providing and supplying staff 12 II 13 chairs of Standared Company made up of MS tubes and upholstery as requirement & as directed by the Engineer incharge of the work. Electrical Works Point wiring using copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing caping using copper PVC insulated multi strand 2X1.5Sqmm copper wire with a 6Amps flush type SP control switch shall be fixed on the exist b)Medium pointabove 3m upto6Mtr from tapping point to out let via switch. c) Long point above 6Mtr upto 10 Mtr from tapping point to out let via switch 14 S/F Metal clad socket and tops 25 amp and as directed by engineer incharge of the work. Supplying of recessed/surface mount aesthetic square / rectangular modular luminary made out of single piece powder coated CRCA sheet steel accommodating all electrical accessories like VPIT 18 W copper ballast suitable to operate on 230V 50 Hz AC supply I) 1 x 18 watts a) Group A II) 2 x 18 watts a) Group A Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on230 volts, 50 cycles. Single phase AC supply conforming to ISS 374-1979 and with double ball bearing system and as directed by the engineer incharg Fixing all types and all capacities fluorescent / false ceiling / spot light / CFL fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076 twin twisted PVC insulated wires, required nos of round block and clamps (if required) and as dir Extra length of GI pipe of class B19mm for down rod and as directed by the engineer incharge of the work Supplying high pressure watts metal halide street light luminary suitable for use with high pressure metal halide lamp with integrated control gear. The fitting shall be non corrosive high pressure die cast aluminum housing with low copper content black Wiring for lighting / power circuit using one of PVC insulted 1100 v grade, multis & copper conductor single core cable in open or concealed system of wiring and as directed by the engineer incharge of the work II) Group B Materials a)1 sqmm c) 2.5 sqmm d) 4 sqmm e)6 sqmm Mtrs Mtrs Mtrs No.s 6.00 3.00 14.00 8.00 3.00 Yes Yes Yes Yes Yes Each 4.00 4.00 4.00 Yes

1. Procurement of material stored in store room.

15

No.s No.s No.s

10.00

6.00

Yes Yes Yes 1. Procurement of material stored in store room.

16

No.s

4.00

4.00

Yes

17 18 19

No.s Mtrs No.s

16.00 4.00 1.00

3.60 -

Yes Yes Yes

20

Mtrs Mtrs Mtrs Mtrs

100.00 200.00 150.00 220.00

Yes Yes Yes Yes

21 22 23

Supplying PVC/GI flexible conduit pipe 25 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and the either end of the pipe terminated com Distribution box ( 6 way) and as directed by the engineer incharge of the work Supplying and fixing miniature circute breakers on existing MCB distribution boards using necessary fixing materials & wiring complete as per required. 4 pole 30Amps E)5-32 Amps TPN Group - B And as directed by the engineer incharge of the work 2 pole 30Amps MCB C) 5-32 Amps Double Pole f) 40-63Amps TPN a) 52-32 amps SP

Mtrs No.s No.s No.s No.s No.s Mtrs

270.00 1.00

100.00 -

Yes Yes Yes Yes Yes Yes Yes

400.00

24

Supplying and Drawing UTP-CAT 6E LAN cable b)Group B and as directed by the engineer incharge of the work Supplying and fixing polished wood board made of not less than 15mm thick plant on both sides with planks made out of not more than 2 pieces and fixing same to the wall using tapered inverted wooden plug screws etc, 10"x8"x1.5"and as directed by the engin Supplying 6A Flush / Projected type socket and a 6 amps flush /projected type

25

No.s

10.00

4.00

Yes

26

SP switch either surface / flush mounting in a existing gang box or in a 4 mm thick plastic sheet over a flush mounted wooden box and wiring as required and as directed by the Supplying and fixing of porcelain fuse channel with cut out on existing wooden

No.s

60.00

20.00

Yes

27

/ panel using necessery nuts and bolts and washers etc., complete 3(b) 32 Amps and as directed by the engineer incharge of the work. Supplying and fixing of modular switch/socket stepped electronic fan

No.s

10.00

Yes

28

regulator/dimmer/telephone socket etc., on existing modular switch plate Group B and as directed by the engineer incharge of the work b) 6Amps 2 way j)6/16amps universal socket l)RJ45/I.O outlet Supplying flush mounting power coated metal box suitable for mounting modular switch plate. The box should be firmly flush mounted after due groove cutting in brick / stone / CC wall and as directed by the engineer incharge of the work a)1-3way d) 8 way

No.s No.s No.s

6.00 4.00 -

Yes Yes Yes

29

No.s

Yes

No.s No.s 1.00 1.00

Yes Yes Yes

30 31

Incoming AC distribution box 4 way and as directed by the engineer incharge of the work Distribution box 12 way and as directed by the engineer incharge of the work Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanized, steel wires /steel tap armoured cable with PVC outer sheathing1.1 KV class and as directed by the engineer incharge of the work. f)3.5 core 35 sqmm

32

Mtrs

40.00

Yes

33

Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stone ware pipe / on wall / on pole as required I. existing to 16 sq mm a) 4 sq mm to 16 sq mm and as directed by engineer incharge of the work. Supplying and fixing of class A (median duty) GI pipe of wall thickness not less than 3.25 mm on pole/ wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class 40mm and directed by engineer incharge of the work. supplying and fixing L.T.cast iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/ insulating compound complete with terminals,clamps,bolts,nuts and washers etc d) 35 sq mm and as directed by engineer inchage of the work. Supplying heavy gauge PVC conduit pipe dia confirming to IS 2509 with suitable size bends junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls Bus bar distribution box 63 amps and as directed by the engineer incharge of the work Supplying of on load change over switch 4 poles, 415 volts 50 Hz AC supply 32 amps Supplying fixing, wiring earth electrode for grounding conduits, I.C cutouts and other equipments on the meter board using 40 mm dia 2.90 thick GI pipe 2.5 Mtr long buried in a pit. The pit should be filled with equal proportion of salt and charcoal 150mm Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following size c)4 sq mm aluminium or copper wire. And as directed by the engineer incharge of the work. Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/ spacers etc.GI wire 8 SWG and as directed by the engineer incharge of the work. Supplying installation of fire alarm controls panel of 2 tone to control fire alarm system peripherals and to warming and identifying the effected area, fully solid state modular fire alarm control panel of sheet metal tailor made to suit and as directed Supplying and fixing photo electric smoke detection (optical) type to operate on the light scailering effect as per IS and as directed by engineer incharge of the work. Supplying and fixing Manual call point to initiate alarm make of study MS enclosure with break open glass to initiate alarm and provided with harmed to break the glass mounted on suitable mounting/wall at appropriate location and has directed by engineer Supplying and wiring the fire alarm system 2x1.5 sq. mtr/copper armored cable confirmed to IS specification 1.1 KV class and as directed by the engineer incharge of the work. Supplying of . TR split Air conditioners suitable for operation on A/c supply single phase 50 Hz 230 Volts with hermetically sealed conformer with air cooled condenser, motor capacitor start run capacitors relay and over load protector internal unit with b) 1.5 ton capacity

Mtrs

35.00

Yes

34

Mtrs

16.00

Yes

35

No.s

1.00

Yes

36 37 38 39

Mtrs No.s No.s No.s

4.00 1.00 1.00 3.00

2.00

Yes Yes Yes Yes

40

No.s

30.00

Yes

41

Mtrs

20.00

20.00

Yes

42

No.s

1.00

Yes

43

No.s

15.00

Yes

44

No.s

1.00

Yes

45

Mtrs

161.00

Yes

46 47

No.s No.s

2.00 1.00

Yes Yes

48

Installation charges of split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable angle iron support up to 3.0 ton split / cassette type A/c and as directed by the engineer incharge of the work Supplying and installation of insulated refrigerant copper piping of 5/8 and 3/8 with polyphone foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit. leak testing oil and gas charging for additional piping length of pipe and as Supplying installation testing and commissioning of heavy duty compressor suitable for window / split type A/c as directed by the engineer incharge of the work a) 1 ton capacity b) 1.5 ton capacity Extra for Fabrication supply and fixing of stand fabricated using slotted angle / L. Angle of size 6mm x 50 mm for mounting out door indoor AC unit / Batteries and as directed by the engineer incharge of the work. Supplying erection, testing and commissioning of OFF-LINE UPS system

No.s

3.00

Yes

49

No.s

6.00

Yes

50 51 52

No.s No.s No.s

2.00 1.00 3.00

Yes Yes Yes

53

suitable for operation on 230V, 50Hz, A/c supply, with all accessories complete including batteries and wiring complete and as directed by the engineer incharge of the work a) 1KVA Off l Supplying, erection, testing and commissioning of voltage stabilizer suitable for

No.s

2.00

Yes

54

170 to 270 v in put and load variation from no load to full load, with over protection, spike suppression, operating at 00 C to 400 Range etc., complete. and as directed by

No.s

1.00

Yes

INSPECTION REPORT ANNEXURE A Name of work Contractor No. & Date of work Order Improvements to Electrical and Interior works for HD - One Centre at Zonal Office No.6 Keshwapur in Hubli. Shri Angadi P I and Company CR-0909-96-0224-01-000000 Measurements Sl.No . Particulars Unit BOQ Quantity Whether quality of work Quantity is satisfactory

Remarks

No.s

Length

Breadth

Depth

Painting

Work of providing and preparing computer table, using materials as per specifications (including necessary carpentary work) completed.

West Size

Sqm Sqm Sqm Sqm

1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

2.86 2.00 0.74 1.28 0.90 0.90 0.90 1.38 0.40 1.65 0.76 2.00 4.47 2.55 0.49 2.55 2.16 4.09

2.00 0.50 2.00 2.00 0.99 0.99 0.99 2.00 2.00 0.87 2.00 0.50 2.00 0.15 2.00 0.15 2.00 0.50

5.72 1.00 1.48 2.56 0.89 0.89 0.89 2.76 0.80 1.44 1.52 1.00 8.94 0.38 0.98 0.38 4.32 2.05 38.00

South

Sqm Sqm Sqm Sqm Sqm Sqm

East

Sqm Sqm Sqm Sqm Sqm

North

Sqm Sqm Sqm

Measurements Sl.No . Particulars Unit BOQ Quantity

No.s 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

Length 0.90 0.40 1.65 0.68 2.00 0.33 3.07 2.90 2.90 2.90 1.39 1.00 0.60 0.60 0.90

Breadth -

Depth 0.99 2.00 0.87 2.00 0.50 2.00 2.00 2.00 2.46 2.46 2.46 1.13 2.46 2.46 0.90 TOTAL

Whether quality of work Quantity is satisfactory 0.89 0.80 1.44 1.36 1.00 0.66 6.14 5.80 7.13 7.13 3.42 1.13 1.48 1.48 0.81 40.67 78.66

Remarks

Manager Cabin

Sqm Sqm Sqm Sqm Sqm Sqm Sqm Sqm

Service Room

Sqm Sqm Sqm Sqm Sqm Sqm Sqm Sqm Sqm Sqm

Providing and fixed 40mm dia stainless steel pipe of 16 gaige of approved a make and quality with dull/mat finish fixed firmely including bending to required shape and finish etc, completed including cost cost of all lead and lift,loading unloading hire

Reception Counter Computer Tables

Rmtr Rmtr

2.00 6.00

2.55 2.40

TOTAL

5.10 14.40 19.50

Maneger cabin Glass Partition

Measurements Sl.No . Particulars Unit BOQ Quantity

No.s 1.00

Length 1.64

Breadth 1.08

Depth -

Whether quality of work Quantity is satisfactory 1.77

Remarks

Sqm False Ceiling Hall Maneger Cabin Coracles' Sqm Sqm Rmtr Rmtr Rmtr Rmtr Rmtr Rmtr Rmtr Rmtr Rmtr Rmtr Rmtr venetian blinds Sqm Sqm Acrylic Glass Sqm Aluminium partion Sqm

1.00 1.00 2.00 2.00 2.00 4.00 8.00 2.00 2.00 4.00 2.00 2.00 2.00

8.79 3.05 3.05 2.74 5.95 2.59 0.91 4.04 1.83 0.91 5.49 3.20 1.98

7.31 2.74 -

Total Total

64.25 8.37 72.62 6.10 5.49 11.89 10.37 7.32 8.08 3.66 3.66 10.98 6.40 3.96 77.90 2.64 2.64 5.28

1.10 1.10

2.40 2.40

0.61 1.55

0.61 2.20

0.37 3.41

Name of work Contractor Consultant No. & Date of work Order


Sl.No .

Improvements to Electrical and Interior works for HD - One Centre at Zonal Office No.6 Keshwapur in Hubli. Shri Angadi P I and Company Jalavahini Management Services (P) Ltd., HUBLI CR-0909-96-0224-01-000000 Unit
Rate

Particulars
Providing and fixing compute table with granitetop made out of 19mm

BOQ Quantity

Previous Quantity Amount

Present Quantity Amount

Upto Date Quantity Amount

thick machine polished telephonic black granite slab with nosing/19mm

Each

23300.00

3.00

3.00

69900.00

0.00

0.00

3.00

69900.00

thick block board with wood veneeron top of approved color & shade as

per drawing fixed over wood frame with dowel pi Providing and fixing 100mm wide vetain (vertical blinds of window

fashion fabric of tiwan make with 50mm thick aluminium powder coated 2 channel with valiance. Imported Acrylic self alignable mechanism and Sqm 2000.00 18.08 0.00 0.00 0.00 0.00

equally placing spacers, imported titing mechanism Providing and fixing writing desk made out of 12mm thick clear glass for top of writing desk and rubber wood for bottom and divideers. The entire desk assembly is fixed securelyat sides to ornamental column of size 0.23x0.30x2.5m, made out of 19mm thick p Providing and fixed 40mm dia stainless steel pipe of 16 gaige of approved a make and quality with dull/mat finish fixed firmely including bending to required shape and finish etc, completed including cost cost of all lead and lift,loading unloading hire

Each

23000.00

1.00

1.00

23000.00

0.00

0.00

1.00

23000.00

Rmtr

735.00

30.00

0.00

0.00

0.00

0.00

Providing and fixing executive table cum computer table made out of

19mm thick phenol bonded antitermite boilingwater proof block board of

Each

25350.00

1.00

1.00

25350.00

0.00

0.00

1.00

25350.00

greenply/catury/ksfic/approved make and quality confirming to IS stds on

either side of horizontal and vertical memb Providing and fixing wooden wall paneling made out of 19mm thick

phenol bonded anti termite boiling water proof block board of 6 greenply/centry/ approved quality and make conforming to IS standards Sqm 3400.00 49.76 0.00 0.00 0.00 0.00 0.00 0.00

as per detailed drawing issued by the Chief Architect. Go Providing and fixing computer table of size for server made out of 19mm

thick phenol bonded antitermite boiling water proof block boarg of 7 greenpply/century/ksfic/approved make and quality confirning to IS Sqm 8200.00 0.90 0.00 0.00 0.00 0.00 0.00 0.00

standerd. The table is made to a minimum height o

Providing and fixing Reception counter as per detailed drawing

specification and directions with 20mm thick machine polished telephonic

Rmtr

9680.00

3.00

0.00

0.00

0.00

0.00

0.00

0.00

black granite top which is fixed over wood frame work with dowel pins

and adhesives including fixing 200mm wide 19 mm t Providing and fixing side units for computer counter table with granite top

made out of 19mm thick machine polished telephonic black granite slab

Each

3000.00

6.00

6.00

18000.00

0.00

0.00

6.00

18000.00

with nosing as per drawing fixed over wood frame with dowel pins and

10 11 12

adhessives the wood frame work is made o STAFF CHAIRS: Providing and supplying staff chairs of standered company made up of MS tubes and upholstery as requirement & as directed by the engineer incharge of the work. Staff Chairs : VISTOR CHAIRS (FOR FOUR MEMBERS SET)Providing and supplying staff chairs of Standared Company made up of MS tubes and upholstery as requirement & as directed by the Engineer incharge of the work. Electrical Works Point wiring using copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing caping using copper PVC insulated multi strand 2X1.5Sqmm copper wire with a 6Amps flush type SP control switch shall be fixed on the exist

Each Each Each

4100.00 3020.00 16500.00

10.00 8.00 4.00

10.00 8.00 4.00

41000.00 24160.00 66000.00

0.00 0.00 0.00

0.00 0.00 0.00

10.00 8.00 4.00

41000.00 24160.00 66000.00

13

Mtrs

165.85

0.00

0.00

0.00

14

S/F Metal clad socket and tops 25 amp and as directed by engineer incharge of the work. Supplying of recessed/surface mount aesthetic square / rectangular modular luminary made out of single piece powder coated CRCA sheet steel accommodating all electrical accessories like VPIT 18 W copper ballast suitable to operate on 230V 50 Hz AC supply I) 1 x 18 watts a) Group A II) 2 x 18 watts a) Group A Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on230 volts, 50 cycles. Single phase AC supply conforming to ISS 374-1979 and with double ball bearing system and as directed by the engineer incharg Fixing all types and all capacities fluorescent / false ceiling / spot light / CFL fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076 twin twisted PVC insulated wires, required nos of round block and clamps (if required) and as dir Extra length of GI pipe of class B19mm for down rod and as directed by the engineer incharge of the work Supplying high pressure watts metal halide street light luminary suitable for use with high pressure metal halide lamp with integrated control gear. The fitting shall be non corrosive high pressure die cast aluminum housing with low copper content black Wiring for lighting / power circuit using one of PVC insulted 1100 v grade, multis & copper conductor single core cable in open or concealed system of wiring and as directed by the engineer incharge of the work II) Group B Materials a)1 sqmm c) 2.5 sqmm d) 4 sqmm e)6 sqmm Supplying PVC/GI flexible conduit pipe 25 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and the either end of the pipe terminated com Distribution box ( 6 way) and as directed by the engineer incharge of the work Supplying and fixing miniature circute breakers on existing MCB distribution boards using necessary fixing materials & wiring complete as per required. 4 pole 30Amps E)5-32 Amps TPN Group - B And as directed by the engineer incharge of the work 2 pole 30Amps MCB C) 5-32 Amps Double Pole f) 40-63Amps TPN a) 52-32 amps SP

No.s

909.50

6.00

6.00

5457.00

0.00

0.00

6.00

5457.00

15

No.s 2514.50 2696.40 No.s 1979.50

0.00 0.00 0.00 4.00

0.00 0.00

0.00 0.00 0.00

0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00 4.00

0.00 0.00 0.00 7918.00

16

4.00

7918.00

0.00

0.00

17 18 19

No.s Mtrs No.s

85.00 90.95 5831.50

16.00 4.00 1.00

16.00 0.00 1.00

1360.00 5831.50

0.00 0.00 0.00

0.00 0.00 0.00

16.00 0.00 1.00

1360.00 0.00 5831.50

20

Mtrs Mtrs Mtrs Mtrs Mtrs No.s No.s No.s No.s No.s Mtrs No.s

856.00 19.26 26.75 42.80 49.22 675.00

0.00 0.00 0.00 0.00 270.00 1.00

0.00 0.00 0.00 0.00 0.00 1.00

0.00 0.00 0.00 0.00 0.00 675.00 0.00

0.00 0.00 0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00 0.00 1.00

0.00 0.00 0.00 0.00 0.00 675.00 0.00

21 22 23

502.90 160.50 1658.50 48.15 80.25

0.00 0.00 0.00 400.00 10.00

0.00 0.00 0.00 0.00 10.00

0.00 0.00 0.00 0.00 802.50

0.00 0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00 10.00

0.00 0.00 0.00 0.00 802.50

24 25

26

Supplying and Drawing UTP-CAT 6E LAN cable b)Group B and as directed by the engineer incharge of the work Supplying and fixing polished wood board made of not less than 15mm thick plant on both sides with planks made out of not more than 2 pieces and fixing same to the wall using tapered inverted wooden plug screws etc, 10"x8"x1.5"and as directed by the engin Supplying 6A Flush / Projected type socket and a 6 amps flush /projected type SP switch either surface / flush mounting in a existing gang box or in a 4 mm thick plastic sheet over a flush mounted wooden box and wiring as required and as directed by the

No.s

96.30

60.00

60.00

5778.00

0.00

0.00

60.00

5778.00

27

28

Supplying and fixing of porcelain fuse channel with cut out on existing wooden / panel using necessery nuts and bolts and washers etc., complete 3(b) 32 Amps and as directed by the engineer incharge of the work. Supplying and fixing of modular switch/socket stepped electronic fan regulator/dimmer/telephone socket etc., on existing modular switch plate Group B and as directed by the engineer incharge of the work b) 6Amps 2 way j)6/16amps universal socket l)RJ45/I.O outlet Supplying flush mounting power coated metal box suitable for mounting modular switch plate. The box should be firmly flush mounted after due groove cutting in brick / stone / CC wall and as directed by the engineer incharge of the work a)1-3way d) 8 way

No.s

96.30

10.00

10.00

963.00

0.00

0.00

10.00

963.00

No.s No.s No.s

96.30 176.55 353.10

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

29

No.s

90.95

0.00

0.00

0.00

0.00

0.00

0.00

0.00

203.30 No.s No.s 675.00 925.00

0.00 1.00 1.00

0.00 1.00 1.00

0.00 675.00 925.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 1.00 1.00

0.00 675.00 925.00

30 31

32

Incoming AC distribution box 4 way and as directed by the engineer incharge of the work Distribution box 12 way and as directed by the engineer incharge of the work Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanized, steel wires /steel tap armoured cable with PVC outer sheathing1.1 KV class and as directed by the engineer incharge of the work. f)3.5 core 35 sqmm Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stone ware pipe / on wall / on pole as required I. existing to 16 sq mm a) 4 sq mm to 16 sq mm and as directed by engineer incharge of the work. Supplying and fixing of class A (median duty) GI pipe of wall thickness not less than 3.25 mm on pole/ wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class 40mm and directed by engineer incharge of the work. supplying and fixing L.T.cast iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/ insulating compound complete with terminals,clamps,bolts,nuts and washers etc d) 35 sq mm and as directed by engineer inchage of the work. Supplying heavy gauge PVC conduit pipe dia confirming to IS 2509 with suitable size bends junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls Bus bar distribution box 63 amps and as directed by the engineer incharge of the work Supplying of on load change over switch 4 poles, 415 volts 50 Hz AC supply 32 amps Supplying fixing, wiring earth electrode for grounding conduits, I.C cutouts and other equipments on the meter board using 40 mm dia 2.90 thick GI pipe 2.5 Mtr long buried in a pit. The pit should be filled with equal proportion of salt and charcoal 150mm Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following size c)4 sq mm aluminium or copper wire. And as directed by the engineer incharge of the work.

Mtrs

224.70

40.00

0.00

0.00

0.00

0.00

0.00

0.00

33

Mtrs

5.35

35.00

0.00

0.00

0.00

0.00

0.00

0.00

34

Mtrs

235.40

16.00

0.00

0.00

0.00

0.00

0.00

0.00

35

No.s

401.25

1.00

0.00

0.00

0.00

0.00

0.00

0.00

36 37 38 39

Mtrs No.s No.s No.s

85.60 675.00 4333.50 1605.00

4.00 1.00 1.00 3.00

0.00 1.00 1.00 3.00

0.00 675.00 4333.50 4815.00

0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00

0.00 1.00 1.00 3.00

0.00 675.00 4333.50 4815.00

40

No.s

856.00

30.00

30.00

25680.00

0.00

0.00

30.00

25680.00

41

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/ spacers etc.GI wire 8 SWG and as directed by the engineer incharge of the work. Supplying installation of fire alarm controls panel of 2 tone to control fire alarm system peripherals and to warming and identifying the effected area, fully solid state modular fire alarm control panel of sheet metal tailor made to suit and as directed Supplying and fixing photo electric smoke detection (optical) type to operate on the light scailering effect as per IS and as directed by engineer incharge of the work. Supplying and fixing Manual call point to initiate alarm make of study MS enclosure with break open glass to initiate alarm and provided with harmed to break the glass mounted on suitable mounting/wall at appropriate location and has directed by engineer Supplying and wiring the fire alarm system 2x1.5 sq. mtr/copper armored cable confirmed to IS specification 1.1 KV class and as directed by the engineer incharge of the work. Supplying of . TR split Air conditioners suitable for operation on A/c supply single phase 50 Hz 230 Volts with hermetically sealed conformer with air cooled condenser, motor capacitor start run capacitors relay and over load protector internal unit with b) 1.5 ton capacity Installation charges of split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable angle iron support up to 3.0 ton split / cassette type A/c and as directed by the engineer incharge of the work Supplying and installation of insulated refrigerant copper piping of 5/8 and 3/8 with polyphone foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit. leak testing oil and gas charging for additional piping length of pipe and as Supplying installation testing and commissioning of heavy duty compressor suitable for window / split type A/c as directed by the engineer incharge of the work a) 1 ton capacity b) 1.5 ton capacity Extra for Fabrication supply and fixing of stand fabricated using slotted

Mtrs

16.05

20.00

0.00

0.00

0.00

0.00

0.00

0.00

42

No.s

12200.00

1.00

1.00

12200.00

0.00

0.00

1.00

12200.00

43

No.s

2500.00

15.00

15.00

37500.00

0.00

0.00

15.00

37500.00

44

No.s

700.00

1.00

1.00

700.00

0.00

0.00

1.00

700.00

45

Mtrs

100.00

161.00

0.00

0.00

0.00

0.00

0.00

0.00

46 47 48

No.s No.s No.s

29960.00 37450.00 37450.00

2.00 1.00 3.00

2.00 1.00 3.00

59920.00 37450.00 112350.00

0.00 0.00 0.00

0.00 0.00 0.00

2.00 1.00 3.00

59920.00 37450.00 112350.00

49

No.s

749.00

6.00

6.00

4494.00

0.00

0.00

6.00

4494.00

50 51 52

No.s No.s No.s

7490.00 8560.00 2033.00

2.00 1.00 3.00

2.00 1.00 3.00

14980.00 8560.00 6099.00

0.00 0.00 0.00

0.00 0.00 0.00

2.00 1.00 3.00

14980.00 8560.00 6099.00

angle / L. Angle of size 6mm x 50 mm for mounting out door indoor AC unit / Batteries and as directed by the engineer incharge of the work. Supplying erection, testing and commissioning of OFF-LINE UPS system suitable for operation on 230V, 50Hz, A/c supply, with all accessories complete including batteries and wiring complete and as directed by the engineer incharge of the work a) 1KVA Off l Supplying, erection, testing and commissioning of voltage stabilizer suitable for 170 to 270 v in put and load variation from no load to full load, with over protection, spike suppression, operating at 00 C to 400 Range etc., complete. and as directed by

53

No.s

3210.00

2.00

2.00

6420.00

0.00

0.00

2.00

6420.00

54

No.s

3745.00

1.00

1.00

3745.00

0.00

0.00

1.00

3745.00

PAINTING

0.00

0.00

78.66

STEEL PIPES

0.00

0.00

19.50

Maneger cabin Glass Partition

0.00

0.00

1.77

False Ceiling

0.00

0.00

72.62

Coracles'

0.00

0.00

77.90

venetian blinds

0.00

0.00

5.28

Acrylic Glass

0.00

0.00

0.37

Aluminium partion

0.00

0.00 501466.50

3.41

637716.50

0.00

637716.50

Name of work Contractor Consultant No. & Date of work Order


Sl.No .

Improvements to Electrical and Interior works for HD - One Centre at Zonal Office No.6 Keshwapur in Hubli. Shri Angadi P I and Company Jalavahini Management Services (P) Ltd., HUBLI CR-0909-96-0224-01-000000 Unit
Rate

Particulars
Providing and fixing compute table with granitetop made out of 19mm

Tendered Quantity Amount Rate

Previous Quantity Amount

Upto Date Quantity Amount

Now to be Paid Quantity Amount

thick machine polished telephonic black granite slab with nosing/19mm

Each

23300.00

3.00

69900.00

25500.00

3.00

76500.00

0.00

0.00

0.00

0.00

thick block board with wood veneeron top of approved color & shade as

per drawing fixed over wood frame with dowel pi Providing and fixing 100mm wide vetain (vertical blinds of window

fashion fabric of tiwan make with 50mm thick aluminium powder coated 2 channel with valiance. Imported Acrylic self alignable mechanism and Sqm 2000.00 0.00 1680.00 17.03 28610.40 0.00 0.00 0.00 #VALUE!

equally placing spacers, imported titing mechanism Providing and fixing writing desk made out of 12mm thick clear glass for top of writing desk and rubber wood for bottom and divideers. The entire desk assembly is fixed securelyat sides to ornamental column of size 0.23x0.30x2.5m, made out of 19mm thick p Providing and fixed 40mm dia stainless steel pipe of 16 gaige of approved a make and quality with dull/mat finish fixed firmely including bending to required shape and finish etc, completed including cost cost of all lead and lift,loading unloading hire

Each

23000.00

1.00

23000.00

19600.00

1.00

19600.00

0.00

0.00

0.00

0.00

Rmtr

735.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

#VALUE!

Providing and fixing executive table cum computer table made out of

19mm thick phenol bonded antitermite boilingwater proof block board of

Each

25350.00

1.00

25350.00

30000.00

1.00

30000.00

0.00

0.00

0.00

0.00

greenply/catury/ksfic/approved make and quality confirming to IS stds on

either side of horizontal and vertical memb Providing and fixing wooden wall paneling made out of 19mm thick

phenol bonded anti termite boiling water proof block board of 6 greenply/centry/ approved quality and make conforming to IS standards Sqm 3400.00 0.00 0.00 3864.00 32.78 126661.92 0.00 0.00 0.00 0.00

as per detailed drawing issued by the Chief Architect. Go Providing and fixing computer table of size for server made out of 19mm

thick phenol bonded antitermite boiling water proof block boarg of 7 greenpply/century/ksfic/approved make and quality confirning to IS Sqm 8200.00 0.00 0.00 8900.00 0.90 8010.00 0.00 0.00 0.00 0.00

standerd. The table is made to a minimum height o

Providing and fixing Reception counter as per detailed drawing

specification and directions with 20mm thick machine polished telephonic

Rmtr

9680.00

0.00

0.00

10440.00

2.67

27874.80

0.00

0.00

0.00

0.00

black granite top which is fixed over wood frame work with dowel pins

and adhesives including fixing 200mm wide 19 mm t Providing and fixing side units for computer counter table with granite top

made out of 19mm thick machine polished telephonic black granite slab

Each

3000.00

6.00

18000.00

3300.00

6.00

19800.00

0.00

0.00

0.00

0.00

with nosing as per drawing fixed over wood frame with dowel pins and

10 11 12

adhessives the wood frame work is made o STAFF CHAIRS: Providing and supplying staff chairs of standered company made up of MS tubes and upholstery as requirement & as directed by the engineer incharge of the work. Staff Chairs : VISTOR CHAIRS (FOR FOUR MEMBERS SET)Providing and supplying staff chairs of Standared Company made up of MS tubes and upholstery as requirement & as directed by the Engineer incharge of the work. Electrical Works Point wiring using copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing caping using copper PVC insulated multi strand 2X1.5Sqmm copper wire with a 6Amps flush type SP control switch shall be fixed on the exist

Each Each Each

4100.00 3020.00 16500.00

10.00 8.00 4.00

41000.00 24160.00 66000.00

4500.00 3000.00 19670.00

10.00 8.00 4.00

45000.00 24000.00 78680.00

0.00 0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00 0.00

0.00 0.00 0.00

13

Mtrs

165.85

0.00

185.00

3.00

555.00

0.00

0.00

0.00

0.00

a) Short point upto 3Mtr to 6Mtrs from tapping point to out let via switch. a) Short point upto 6Mtr to 10Mtrs from tapping point to out let via switch. S/F Metal clad socket and tops 25 amp and as directed by engineer incharge of the work. Supplying of recessed/surface mount aesthetic square / rectangular modular luminary made out of single piece powder coated CRCA sheet steel accommodating all electrical accessories like VPIT 18 W copper ballast suitable to operate on 230V 50 Hz AC supply I) 1 x 18 watts a) Group A II) 2 x 18 watts a) Group A Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on230 volts, 50 cycles. Single phase AC supply conforming to ISS 374-1979 and with double ball bearing system and as directed by the engineer incharg Fixing all types and all capacities fluorescent / false ceiling / spot light / CFL fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076 twin twisted PVC insulated wires, required nos of round block and clamps (if required) and as dir Extra length of GI pipe of class B19mm for down rod and as directed by the engineer incharge of the work Supplying high pressure watts metal halide street light luminary suitable for use with high pressure metal halide lamp with integrated control gear. The fitting shall be non corrosive high pressure die cast aluminum housing with low copper content black Wiring for lighting / power circuit using one of PVC insulted 1100 v grade, multis & copper conductor single core cable in open or concealed system of wiring and as directed by the engineer incharge of the work II) Group B Materials a)1 sqmm c) 2.5 sqmm d) 4 sqmm e)6 sqmm 21 22 23 Supplying PVC/GI flexible conduit pipe 25 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and the either end of the pipe terminated com Distribution box ( 6 way) and as directed by the engineer incharge of the work Supplying and fixing miniature circute breakers on existing MCB distribution boards using necessary fixing materials & wiring complete as per required. 4 pole 30Amps E)5-32 Amps TPN Group - B And as directed by the engineer incharge of the work 2 pole 30Amps MCB C) 5-32 Amps Double Pole f) 40-63Amps TPN a) 52-32 amps SP 24 25 Supplying and Drawing UTP-CAT 6E LAN cable b)Group B and as directed by the engineer incharge of the work Supplying and fixing polished wood board made of not less than 15mm thick plant on both sides with planks made out of not more than 2 pieces and fixing same to the wall using tapered inverted wooden plug screws etc, 10"x8"x1.5"and as directed by the engin

260.00 410.00 No.s 909.50 6.00 5457.00 1000.00

12.00 8.00 3.00

3120.00 3280.00 3000.00

0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00

14

15

No.s

2500.00 2514.50 2696.40

0.00 0.00

0.00 0.00 0.00

2250.00 0.00 2700.00 1800.00

4.00 0.00 6.00 4.00

9000.00 0.00 16200.00 7200.00

0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00

16

No.s

1979.50

4.00

7918.00

17 18 19

No.s Mtrs No.s

85.00 90.95 5831.50

16.00 0.00 1.00

1360.00 5831.50

0.00 100.00

0.00 3.60 0.00

0.00 360.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 #VALUE! 0.00

20

Mtrs Mtrs Mtrs Mtrs Mtrs No.s No.s No.s No.s No.s Mtrs No.s

856.00 19.26 26.75 42.80 49.22 675.00

0.00 0.00 0.00 0.00 0.00 1.00

0.00 0.00 0.00 0.00 0.00 675.00 0.00

9.00 20.00 30.00 47.00 54.00 0.00

100.00 200.00 150.00 40.00 100.00 0.00

900.00 4000.00 4500.00 1880.00 5400.00 0.00 0.00

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00

502.90 160.50 1658.50 48.15 80.25

0.00 0.00 0.00 0.00 10.00

0.00 0.00 0.00 0.00 802.50

0.00 0.00 0.00 0.00 85.00

0.00 0.00 0.00 0.00 4.00

0.00 0.00 0.00 0.00 340.00

26

27

28

Supplying 6A Flush / Projected type socket and a 6 amps flush /projected type SP switch either surface / flush mounting in a existing gang box or in a 4 mm thick plastic sheet over a flush mounted wooden box and wiring as required and as directed by the Supplying and fixing of porcelain fuse channel with cut out on existing wooden / panel using necessery nuts and bolts and washers etc., complete 3(b) 32 Amps and as directed by the engineer incharge of the work. Supplying and fixing of modular switch/socket stepped electronic fan regulator/dimmer/telephone socket etc., on existing modular switch plate Group B and as directed by the engineer incharge of the work b) 6Amps 2 way j)6/16amps universal socket l)RJ45/I.O outlet Supplying flush mounting power coated metal box suitable for mounting modular switch plate. The box should be firmly flush mounted after due groove cutting in brick / stone / CC wall and as directed by the engineer incharge of the work a)1-3way d) 8 way

No.s

96.30

60.00

5778.00

100.00

20.00

2000.00

0.00

0.00

0.00

0.00

No.s

96.30

10.00

963.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

No.s No.s No.s

96.30 176.55 353.10

0.00 0.00 0.00

0.00 0.00 0.00

100.00 190.00 0.00

10.00 4.00 0.00

1000.00 760.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

29

No.s

90.95

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

203.30 No.s No.s 675.00 925.00

0.00 1.00 1.00

0.00 675.00 925.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

30 31

32

Incoming AC distribution box 4 way and as directed by the engineer incharge of the work Distribution box 12 way and as directed by the engineer incharge of the work Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanized, steel wires /steel tap armoured cable with PVC outer sheathing1.1 KV class and as directed by the engineer incharge of the work. f)3.5 core 35 sqmm Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stone ware pipe / on wall / on pole as required I. existing to 16 sq mm a) 4 sq mm to 16 sq mm and as directed by engineer incharge of the work. Supplying and fixing of class A (median duty) GI pipe of wall thickness not less than 3.25 mm on pole/ wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class 40mm and directed by engineer incharge of the work. supplying and fixing L.T.cast iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/ insulating compound complete with terminals,clamps,bolts,nuts and washers etc d) 35 sq mm and as directed by engineer inchage of the work. Supplying heavy gauge PVC conduit pipe dia confirming to IS 2509 with suitable size bends junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls Bus bar distribution box 63 amps and as directed by the engineer incharge of the work Supplying of on load change over switch 4 poles, 415 volts 50 Hz AC supply 32 amps Supplying fixing, wiring earth electrode for grounding conduits, I.C cutouts and other equipments on the meter board using 40 mm dia 2.90 thick GI pipe 2.5 Mtr long buried in a pit. The pit should be filled with equal proportion of salt and charcoal 150mm Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following size c)4 sq mm aluminium or copper wire. And as directed by the engineer incharge of the work.

Mtrs

224.70

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

33

Mtrs

5.35

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

34

Mtrs

235.40

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

35

No.s

401.25

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

36

Mtrs

85.60

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

37 38 39

No.s No.s No.s

675.00 4333.50 1605.00

1.00 1.00 3.00

675.00 4333.50 4815.00

0.00 0.00 1210.00

0.00 0.00 2.00

0.00 0.00 2420.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

40

No.s

856.00

30.00

25680.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

41

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/ spacers etc.GI wire 8 SWG and as directed by the engineer incharge of the work. Supplying installation of fire alarm controls panel of 2 tone to control fire alarm system peripherals and to warming and identifying the effected area, fully solid state modular fire alarm control panel of sheet metal tailor made to suit and as directed Supplying and fixing photo electric smoke detection (optical) type to operate on the light scailering effect as per IS and as directed by engineer incharge of the work. Supplying and fixing Manual call point to initiate alarm make of study MS enclosure with break open glass to initiate alarm and provided with harmed to break the glass mounted on suitable mounting/wall at appropriate location and has directed by engineer Supplying and wiring the fire alarm system 2x1.5 sq. mtr/copper armored cable confirmed to IS specification 1.1 KV class and as directed by the engineer incharge of the work. Supplying of . TR split Air conditioners suitable for operation on A/c supply single phase 50 Hz 230 Volts with hermetically sealed conformer with air cooled condenser, motor capacitor start run capacitors relay and over load protector internal unit with b) 1.5 ton capacity Installation charges of split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable angle iron support up to 3.0 ton split / cassette type A/c and as directed by the engineer incharge of the work Supplying and installation of insulated refrigerant copper piping of 5/8 and 3/8 with polyphone foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit. leak testing oil and gas charging for additional piping length of pipe and as Supplying installation testing and commissioning of heavy duty compressor suitable for window / split type A/c as directed by the engineer incharge of the work a) 1 ton capacity b) 1.5 ton capacity Extra for Fabrication supply and fixing of stand fabricated using slotted

Mtrs

16.05

0.00

0.00

16.00

20.00

320.00

0.00

0.00

0.00

0.00

42

No.s

12200.00

1.00

12200.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

43

No.s

2500.00

15.00

37500.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

44

No.s

700.00

1.00

700.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

45

Mtrs

100.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

46 47 48

No.s No.s No.s

29960.00 37450.00 37450.00

2.00 1.00 3.00

59920.00 37450.00 112350.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

49

No.s

749.00

6.00

4494.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

50 51 52

No.s No.s No.s

7490.00 8560.00 2033.00

2.00 1.00 3.00

14980.00 8560.00 6099.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

0.00 0.00 0.00

angle / L. Angle of size 6mm x 50 mm for mounting out door indoor AC unit / Batteries and as directed by the engineer incharge of the work. Supplying erection, testing and commissioning of OFF-LINE UPS system suitable for operation on 230V, 50Hz, A/c supply, with all accessories complete including batteries and wiring complete and as directed by the engineer incharge of the work a) 1KVA Off l Supplying, erection, testing and commissioning of voltage stabilizer suitable for 170 to 270 v in put and load variation from no load to full load, with over protection, spike suppression, operating at 00 C to 400 Range etc., complete. and as directed by

53

No.s

3210.00

2.00

6420.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

54

No.s

3745.00

1.00

3745.00

0.00

0.00

0.00

0.00

0.00

0.00

0.00

637716.50

550972.12

0.00

#VALUE!

ESTIMATION ITEM FOR RENOVATION OF HD-1Centre at Zonal Office No Near Glasshouses in Hubli
Name of work Contractor Consultant No. & Date of work Order
Sl. No .

Improvements to Electrical and Interior works for HD - One Centre at Zonal Office No Near Glasshouses in Hubli.

Measurements Particulars
STAFF CHAIRS: Providing and supplying staff chairs of standered company made up of MS tubes and upholstery as requirement & as directed by the engineer incharge of the work.

Unit

No.s

Length

Breadth

Depth

Quantity

REMARKS

Each

10.00

10.00

Staff Chairs : a) VISTOR CHAIRS (FOR FOUR MEMBERS SET)Providing and supplying staff chairs of Standared Company made up of MS tubes and upholstery as requirement & as directed by the Engineer incharge of the work. B) Customer chair front of counter

Each

8.00 4

8.00

Each 10

4.00

II 3

Electrical Works Point wiring using copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing caping using copper PVC insulated multi stand 2X1.5Sqmm copper wire with a 6Amps flush type SP control switch shall be fixed on the exist b)Medium pointabove 3m upto6Mtr from tapping point to out let via switch. c) Long point above 6Mtr upto 10 Mtr from tapping point to out let via switch Mtrs 3.00 3.00

Mtrs Mtrs

14.00 8.00

14.00 8.00

S/F Metal clad socket and tops 25 amp and as directed by engineer incharge of the work. Supplying of recessed/surface mount aesthetic square / rectangular modular luminary made out of single piece powder 5 coated CRCA sheet steel accommodating all electrical accessories like VPIT 18 W copper ballast suitable to operate on 230V 50 Hz AC supply I) 1 x 18 watts a) Group A II) 2 x 18 watts a) Group A Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on230 volts, 50 6 cycles. Single phase AC supply conforming to ISS 374-1979 and with double ball bearing system and as directed by the engineer incharg Fixing all types and all capacities fluorescent / false ceiling / spot light / CFL fittings indoor on the wall / ceiling / rafters / girders 7 using 23/0.0076 twin twisted PVC insulated wires, required nos of round block and clamps (if required) and as dir Extra length of GI pipe of class B19mm for down rod and as 8 directed by the engineer incharge of the work Supplying high pressure watts metal halide street light luminary suitable for use with high pressure metal halide lamp with 9 integrated control gear. The fitting shall be non corrosive high pressure die cast aluminum housing with low copper content black Wiring for lighting / power circuit using one of PVC insulted 1100 v grade, multis & copper conductor single core cable in open or 10 concealed system of wiring and as directed by the engineer incharge of the work II) Group B Materials a)1 sqmm c) 2.5 sqmm d) 4 sqmm e)6 sqmm Supplying PVC/GI flexible conduit pipe 25 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl 11 plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and the either end of the pipe terminated com Distribution box ( 6 way) and as directed by the engineer 12 incharge of the work 4

No.s

3.00

3.00

No.s No.s No.s No.s

2.00 3.00 3.00 4.00

2.00 3.00 3.00 4.00

No.s Mtrs

6.00

3.60

6.00 3.60

No.s

5.00

5.00

Mtrs Mtrs Mtrs Mtrs Mtrs

100.00

100.00 200.00 150.00 220.00 100.00

No.s

2.00

13

Supplying and fixing miniature circute breakers on existing MCB distribution boards using necessary fixing materials & wiring complete as per required. 4 pole 30Amps E)5-32 Amps TPN Group - B And as directed by the engineer incharge of the work 2 pole 30Amps MCB C) 5-32 Amps Double Pole

No.s

3.00

f) 40-63Amps TPN a) 52-32 amps SP Supplying and Drawing UTP-CAT 6E LAN cable b)Group B and as 14 directed by the engineer incharge of the work Supplying and fixing polished wood board made of not less than 15mm thick plant on both sides with planks made out of not more 15 than 2 pieces and fixing same to the wall using tapered inverted wooden plug screws etc, 10"x8"x1.5"and as directed by the engin Supplying 6A Flush / Projected type socket and a 6 amps flush /projected type SP switch either surface / flush mounting in a 16 existing gang box or in a 4 mm thick plastic sheet over a flush mounted wooden box and wiring as required and as directed by the Supplying and fixing of porcelain fuse channel with cut out on existing wooden / panel using necessery nuts and bolts and 17 washers etc., complete 3(b) 32 Amps and as directed by the engineer incharge of the work. Supplying and fixing of modular switch/socket stepped electronic fan regulator/dimmer/telephone socket etc., on existing modular 18 switch plate Group B and as directed by the engineer incharge of the work b) 6Amps 2 way j)6/16amps universal socket l)RJ45/I.O outlet Supplying flush mounting power coated metal box suitable for mounting modular switch plate. The box should be firmly flush mounted after due groove cutting in brick / stone / CC wall and as directed by the engineer incharge of the work a)1-3way Incoming AC distribution box 4 way and as directed by the engineer incharge of the work

No.s No.s No.s Mtrs

3.00 3.00 3.00 25.00

3.00 3.00 3.00 25.00

No.s

4.00

4.00

No.s

6.00

6.00

No.s

6.00

6.00

No.s No.s No.s

6.00 6.00 -

6.00 6.00 -

19

No.s

2.00

2.00

20

No.s

4.00

4.00

21

Distribution box 12 way and as directed by the engineer incharge of the work Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanized, steel wires /steel tap armoured cable with PVC outer sheathing1.1 KV class and as directed by the engineer incharge of the work. f)3.5 core 35 sqmm Supplying installation of fire alarm controls panel of 2 tone to control fire alarm system peripherals and to warming and identifying the effected area, fully solid state modular fire alarm control panel of sheet metal tailor made to suit and as directed

No.s

4.00

4.00

22

Mtrs

50.00

50.00

32

No.s

1.00

1.00

Supplying and fixing photo electric smoke detection (optical) type 33 to operate on the light scailering effect as per IS and as directed by engineer incharge of the work. Supplying and fixing Manual call point to initiate alarm make of study MS enclosure with break open glass to initiate alarm and 34 provided with harmed to break the glass mounted on suitable mounting/wall at appropriate location and has directed by engineer Supplying and wiring the fire alarm system 2x1.5 sq. mtr/copper 35 armored cable confirmed to IS specification 1.1 KV class and as directed by the engineer incharge of the work. Supplying of . TR split Air conditioners suitable for operation on A/c supply single phase 50 Hz 230 Volts with hermetically sealed 36 conformer with air cooled condenser, motor capacitor start run capacitors relay and over load protector internal unit with Providing Labour charges of Re-wiring and Re cheack-up For All Exisiting Electricals (3phase) points and including nessery matirial 43 and as directed by the engineer incharge of the work. CIVIL WORKS

No.s

2.00

2.00

No.s

2.00

2.00

Mtrs

2.00

2.00

No.s

4.00

4.00

No,s

26.00

26.00

Providing Renovation and Repair for Bath rooms,Toilets,wash basin,water supply system,and under ground system ,and as directed by the engineer incharge of the work. Bath rooms&Toilets (Labour charges for UGD line (a) chuckup&clearance) Material Requirements For UGD Line & water supply Providing Standred ISI Mark steel Longbody bibcock Providing Standred ISI Mark steel Shortbody bibcock Class A GI pipe,40mm Class A GI pipe,25mm Wash basin Errection&Fixing to proper place(Labour charges) Providing and renivations, Repairs for supperationof Meeting hall & store room 44 allouminum partition with shatter with nessery all fittings providing and fixing window outer side 5mm thick 10mm sqm chicken mesh 45 W1 Ventilaters Prividing Refitting for Manager room 10mm thick Glass door with nessery of fast fittings Providing, Making Standred alluminium Fram Name Board Providing Nilone Curten Rode with Standered arrangements W1 Ventilaters Providing and renivations, Repairs for Glass Fitting To windows

Nos Each Each Mtrs Mtrs No,s

2.00 2.00 2.00 9.00 12.00 1.00

2.00 2.00 2.00 9.00 12.00 1.00

sqm

1.00

3.6

Each Each

9.00 5.00 1.00 1.00

2.00 1.00 0.90 3.00

1.80 0.60 2.10 1.50

Each Each No,s

9.00 5.00 3 2.5

2.00 1.00 2.00

1.80 0.60 1.80

ESTIMATION ITEM FOR RENOVATION OF HD-1Centre at Zonal Office No12Near Kalabhavan in Dharwad
Name of work Contractor Consultant No. & Date of work Order
Sl.No .

Improvements to Electrical and Interior works for HD -

Particulars

Unit

Measurements Breadt Quantit No.s Length Depth h y


10.00

STAFF CHAIRS: Providing and supplying staff chairs of standered company made up of MS tubes and upholstery as requirement Each 10.00 & as directed by the engineer incharge of the work. Staff Chairs : Each 8.00 a) VISTOR CHAIRS (FOR FOUR MEMBERS SET)Providing and supplying staff chairs of Standared Company made up of MS tubes 4 and upholstery as requirement & as Each directed by the Engineer incharge of the 10 work. B) Customer chair front of counter

8.00

4.00

II

Electrical Works Point wiring using copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit/casing caping using copper PVC insulated multi stand 2X1.5Sqmm copper wire with a 6Amps flush type SP control switch shall be fixed on the exist b)Medium pointabove 3m upto6Mtr from tapping point to out let via switch. c) Long point above 6Mtr upto 10 Mtr from tapping point to out let via switch S/F Metal clad socket and tops 25 amp and as directed by engineer incharge of the work. Supplying of recessed/surface mount aesthetic square / rectangular modular luminary made out of single piece powder coated CRCA sheet steel accommodating all electrical accessories like VPIT 18 W copper ballast suitable to operate on 230V 50 Hz AC supply I) 1 x 18 watts a) Group A II) 2 x 18 watts a) Group A

Mtrs

3.00

3.00

Mtrs Mtrs No.s

3.00

14.00 8.00 -

14.00 8.00 3.00

No.s

2.00

2.00

No.s No.s

3.00 3.00

3.00 3.00

10

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on230 volts, 50 cycles. Single phase AC supply conforming to ISS 374-1979 and with double ball bearing system and as directed by the engineer incharg Fixing all types and all capacities fluorescent / false ceiling / spot light / CFL fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076 twin twisted PVC insulated wires, required nos of round block and clamps (if required) and as dir Extra length of GI pipe of class B19mm for down rod and as directed by the engineer incharge of the work Supplying high pressure watts metal halide street light luminary suitable for use with high pressure metal halide lamp with integrated control gear. The fitting shall be non corrosive high pressure die cast aluminum housing with low copper content black Wiring for lighting / power circuit using one of PVC insulted 1100 v grade, multis & copper conductor single core cable in open or concealed system of wiring and as directed by the engineer incharge of the work II) Group B Materials a)1 sqmm c) 2.5 sqmm d) 4 sqmm e)6 sqmm Supplying PVC/GI flexible conduit pipe 25 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and the either end of the pipe terminated com Distribution box ( 6 way) and as directed by the engineer incharge of the work Supplying and fixing miniature circute breakers on existing MCB distribution boards using necessary fixing materials & wiring complete as per required. 4 pole 30Amps E)5-32 Amps TPN Group - B And as directed by the engineer incharge of the work 2 pole 30Amps MCB C) 5-32 Amps Double Pole f) 40-63Amps TPN a) 52-32 amps SP

No.s

4.00

4.00

No.s

6.00

6.00

Mtrs

3.60

3.60

No.s

5.00

5.00

Mtrs

100.00

Mtrs Mtrs Mtrs

200.00 150.00 220.00

11

Mtrs

100.00

100.00

12

No.s

2.00

13

No.s

3.00

No.s No.s No.s

3.00 3.00 3.00

3.00 3.00 3.00

14

15

16

17

18

Supplying and Drawing UTP-CAT 6E LAN cable b)Group B and as directed by the engineer incharge of the work Supplying and fixing polished wood board made of not less than 15mm thick plant on both sides with planks made out of not more than 2 pieces and fixing same to the wall using tapered inverted wooden plug screws etc, 10"x8"x1.5"and as directed by the engin Supplying 6A Flush / Projected type socket and a 6 amps flush /projected type SP switch either surface / flush mounting in a existing gang box or in a 4 mm thick plastic sheet over a flush mounted wooden box and wiring as required and as directed by the Supplying and fixing of porcelain fuse channel with cut out on existing wooden / panel using necessery nuts and bolts and washers etc., complete 3(b) 32 Amps and as directed by the engineer incharge of the work. Supplying and fixing of modular switch/socket stepped electronic fan regulator/dimmer/telephone socket etc., on existing modular switch plate Group B and as directed by the engineer incharge of the work b) 6Amps 2 way j)6/16amps universal socket l)RJ45/I.O outlet

Mtrs

25.00

25.00

No.s

4.00

4.00

No.s

6.00

6.00

No.s

6.00

6.00

No.s

6.00

6.00

No.s No.s

6.00 -

6.00 -

19

Supplying flush mounting power coated metal box suitable for mounting modular switch plate. The box should be firmly flush mounted after due groove cutting in brick / No.s stone / CC wall and as directed by the engineer incharge of the work a)1-3way d) 8 way Incoming AC distribution box 4 way and as No.s directed by the engineer incharge of the work Distribution box 12 way and as directed by No.s the engineer incharge of the work Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanized, steel wires /steel tap armoured cable with PVC outer Mtrs sheathing1.1 KV class and as directed by the engineer incharge of the work. f)3.5 core 35 sqmm

2.00

2.00

2.00 4.00 4.00

2.00 4.00 4.00

20 21

22

50.00

50.00

23

Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stone ware pipe / on wall / on pole as required I. existing to 16 sq mm a) 4 sq mm to 16 sq mm and as directed by engineer incharge of the work.

Mtrs

50.00

50.00

24

25

Supplying and fixing of class A (median duty) GI pipe of wall thickness not less than 3.25 mm on pole/ wall/drain crossing Mtrs with necessary clamping arrangements for UG cable of 1.1 KV class 40mm and directed by engineer incharge of the work. supplying and fixing L.T.cast iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/ insulating compound complete with No.s terminals,clamps,bolts,nuts and washers etc d) 35 sq mm and as directed by engineer inchage of the work.

15.00

15.00

2.00

2.00

Supplying heavy gauge PVC conduit pipe dia confirming to IS 2509 with suitable size bends junction boxes, adhesive paste etc., 26 and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls Bus bar distribution box 63 amps and as 27 directed by the engineer incharge of the work upplying of on28 change over switch 4 poles, 415 volts 50 Hz load Supplying fixing, wiring earth electrode for grounding conduits, I.C cutouts and other equipments on the meter board using 40 mm dia 2.90 thick GI pipe 2.5 Mtr long 29 buried in a pit. The pit should be filled with equal proportion of salt and charcoal 150mm Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following size 30 c)4 sq mm aluminium or copper wire. And as directed by the engineer incharge of the work. Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) 31 using necessary suitable size clamps, nails, guttas/ spacers etc.GI wire 8 SWG and as directed by the engineer incharge of the work.

Mtrs

6.00

6.00

No.s

2.00

2.00 1.00

AC supply 32 amps No.s 1.00

No.s

2.00

2.00

No.s

10.00

10.00

Mtrs

20.00

20.00

32

Supplying installation of fire alarm controls panel of 2 tone to control fire alarm system peripherals and to warming and identifying the effected area, fully solid state modular No.s fire alarm control panel of sheet metal tailor made to suit and as directed Supplying and fixing photo electric smoke detection (optical) type to operate on the light scailering effect as per IS and as directed by engineer incharge of the work. Supplying and fixing Manual call point to initiate alarm make of study MS enclosure with break open glass to initiate alarm and provided with harmed to break the glass mounted on suitable mounting/wall at appropriate location and has directed by engineer Supplying and wiring the fire alarm system 2x1.5 sq. mtr/copper armored cable confirmed to IS specification 1.1 KV class and as directed by the engineer incharge of the work. Supplying of . TR split Air conditioners suitable for operation on A/c supply single phase 50 Hz 230 Volts with hermetically sealed conformer with air cooled condenser, motor capacitor start run capacitors relay and over load protector internal unit with Installation charges of split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable angle iron support up to 3.0 ton split / cassette type A/c and as directed by the engineer incharge of the work

1.00

1.00

33

No.s

2.00

2.00

34

No.s

2.00

2.00

35

Mtrs

2.00

2.00

36

No.s

4.00

4.00

37

No.s

4.00

4.00

38

39

Supplying and installation of insulated refrigerant copper piping of 5/8 and 3/8 with polyphone foam insulation 3 core 80 No.s stand copper wiring between indoor and outdoor unit. leak testing oil and gas charging for additional piping length of pipe and as Supplying installation testing and commissioning of heavy duty compressor No.s suitable for window / split type A/c as directed by the engineer incharge of the work a) 1 ton capacity

1.00

1.00

1.00

1.00

40

41

42

43

(a)

44

45

Extra for Fabrication supply and fixing of stand fabricated using slotted angle / L. Angle of size 6mm x 50 mm for mounting out door indoor AC unit / Batteries and as directed by the engineer incharge of the work. Supplying erection, testing and commissioning of OFF-LINE UPS system suitable for operation on 230V, 50Hz, A/c supply, with all accessories complete including batteries and wiring complete and as directed by the engineer incharge of the work a) 1KVA Off l Supplying, erection, testing and commissioning of voltage stabilizer suitable for 170 to 270 v in put and load variation from no load to full load, with over protection, spike suppression, operating at 00 C to 400 Range etc., complete. and as directed by Providing Labour charges of Re-wiring and Re cheack-up For All Exisiting Electricals points and as directed by the engineer incharge of the work. CIVIL WORKS Providing Renovation and Repair for Bath rooms,Toilets,wash basin,water supply system,and under ground system ,and as directed by the engineer incharge of the work. Bath rooms&Toilets (Labour charges for UGD line chuckup&clearance) Material Requirements For UGD Line & water supply Providing Standred ISI Mark steel Longbody bibcock Providing Standred ISI Mark steel Shortbody bibcock Class A GI pipe,40mm Class A GI pipe,25mm Wash basin Errection&Fixing to proper place(Labour charges) Providing and renivations, Repairs for supperationof Meeting hall & store room allouminum partition with shatter with nessery all fittings providing and fixing window outer side 5mm thick 10mm sqm chicken mesh W1 Ventilaters Prividing Refitting for Manager room 10mm thick Glass door with nessery of fast fittings Providing, Making Standred alluminium Fram Name Board

No.s

12.00

12.00

No.s

2.00

2.00

No.s

2.00

2.00

No,s

26.00

26.00

Nos

2.00

2.00

Each

2.00

2.00 2.00 9.00 12.00 1.00

Each 2.00 Mtrs 9.00 Mtrs 12.00 No,s 1.00

sqm

12.00

10

Each Each

9.00 5.00

2.00 1.00

1.80 0.60

1.00 1.00

0.90 3.00

2.10 1.50

Zonal Office

terior works for HD -

REMARKS

You might also like