Professional Documents
Culture Documents
Caractristiques
Tension Frquence 100 - 240 V 50 - 60 Hz 2 x 1,5 mm Encombrement 4 modules Norme Courant porteur EN 50065 IEC 60669-2-1 + 5C + 45C
2
Charges
26 38 110 V 230 V 1250 W 2500 W 1250 W 2500 W 1000 VA 2000 VA 8 x 36 W 8 x 36 W 250 W 500 W
Lampe halogne TBT transformateur ferromagntique ou lectronique Tube fluorescent Lampe fluocompact
Branchement
N L
A la premire mise sous tension lappui sur les touches 1 ou 2 commande les charges qui sont raccordes aux bornes des sorties 1 et 2.
N0064ES9/ 00
Configuration dusine
Description
Entres auxiliaires
Touche LEARN
N d'identification
Touches de commandes
Fonctionnement
Linterrupteur multifonctions modulaire possde 4 modes de fonctionnement diffrents : - Poussoir > - Interrupteur > - Tlrupteur > - Interrupteur temporis de 5 3h La slection de la fonction est indpendante de la programmation.
Ce produit peut tre command par dautres produits, il est alors Acteur dun scnario. Il peut tre acteur de 16 scnarios maximum par sortie. Il ne peut pas tre Leader.
Le scnario associ la touche 1 (ou 2) sera automatiquement lanc lapparition de la phase sur lentre auxiliaire 1 (ou 2). Les produits pouvent tre connects aux entres auxiliaires 1 ou 2. Ce produit peut communiquer avec des produits radio travers linterface RF / PLC rf. 036 06 / 29.
(1) Apprentissage : action dassocier des produits en vue de les commander simultanment partir dun point central. Cette association se ralise en appliquant la procdure dapprentissage du scnario en page 3. (2) Scnario : correspond lensemble des produits (acteurs) qui sont associs une touche de commande.
Apprentissage du scnario
Etape 1 : dbuter l'apprentissage (sur le LEADER)
Appuyer sur la touche de commande qui doit piloter le scnario Pour ajouter plusieurs produits au scnario, rpter pour chaque acteur et . les oprations
Les voyants de tous les produits s'teignent. Le scnario est enregistr. Appuyer sur LEARN
ou
Etape 3 : enregistrer le scnario (sur le LEADER) Les voyants de tous les produits s'teignent. Le scnario est enregistr. Appuyer sur LEARN
Effacer tous les scnarios lis ce produit (sur le LEADER) Retour du produit en configuration usine Appuyer sur LEARN Appuyer sur LEARN et maintenir 10s 5s
Lgende
Le voyant s'teint Le voyant clignote lentement 3 Le voyant clignote rapidement Le voyant flashe
Characteristics
Voltage Frequency 100 - 240 V 50 - 60 Hz 2 x 1.5 mm Dimensions 4 modules Standards Mains borne signalling EN 50065 IEC 60669-2-1 + 5C to + 45C
2
Loads
26 38 110 V 230 V 1250 W 2500 W 1250 W 2500 W 1000 VA 2000 VA 8 x 36 W 8 x 36 W 250 W 500 W
ELV halogen lamp with ferromagnetic or electronic transformer Fluorescent tube Fluocompact lamp
Connection
N L
Factory settings
When first powered up, pressing the buttons 1 or 2 controls the loads connected to output terminals 1 and 2.
Description
Auxiliary inputs
LEARN button
LEARN indicator light Communication media PLC => Mains borne signalling
Operation
The modular multifunction switch has 4 different operating modes: - Push-button > - Switch > - Latching relay > - Timer switch, from 5 s to 3 hrs Function selection is separate from programming.
This product can be controlled by other products, where it becomes the Actor of a scenario. It can be an actor in 16 scenarios max. per output. It cannot be a Leader.
Relay outputs 1 and 2 are automatically controlled when phase shows at auxiliary input 1 or 2, respectively. Products that can be connected to auxiliary inputs include: push-buttons, switches, clocks, etc. This product can communicate with radio products through the RF / PLC interface, Cat. No. 036 06 / 29.
(1) Learning: action of linking products to be controlled simultaneously from a central point. This linking is performed by applying the scenario learning procedure on page 7. (2) Scenario: corresponds to all the products (actors) that are linked to a control button.
Learn scenario
Step 1 : Start the learn phase (on the LEADER)
Press LEARN
Press the command key that is to control the scenario To add a number of products to the scenario, repeat operations and for each actor.
Press LEARN
Step 3 : Record the scenario (on the LEADER) The indicator lamps of all the products go off. The scenario is recorded. Press LEARN
Modification of a scenario
Step 1: Open the scenario (on the LEADER) The indicator lamps of all the products in the scenario blink. Press LEARN Press the command key that controls the scenario
Step 2 : Modify the state of an actor in the scenario (on the ACTOR)
Press LEARN or
Press LEARN
To remove the product from the scenario, go to step 3 Step 3 : Record the scenario (on the LEADER) The indicator lamps of all the products go off. The scenario is recorded. Press LEARN
Clearing a scenario
Clear all the scenarios linked with the command key (on the LEADER) The scenario is cleared Press LEARN Press the command key and hold it down for 10 s 5s
Clear all the scenarios linked to this product (on the LEADER) Return the product to factory configuration Press LEARN Press LEARN and hold down for 10 s 5s
Key
The indicator lamp goes off The indicator lamp blinks slowly 7 The indicator lamp blinks quickly The indicator lamp flashes